| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In IZArc through 4.5, there is a Mark-of-the-Web Bypass Vulnerability. When a user performs an extraction from an archive file that bears Mark-of-the-Web, Mark-of-the-Web is not propagated to the extracted files. NOTE: this is disputed because Mark-of-the-Web propagation can increase risk via security-warning habituation, and because the intended control sphere for file-origin metadata (e.g., HostUrl in Zone.Identifier) may be narrower than that for reading the file's content. |
| There is a HIGH severity vulnerability affecting the CPython "zipfile"
module affecting "zipfile.Path". Note that the more common API "zipfile.ZipFile" class is unaffected.
When iterating over names of entries in a zip archive (for example, methods
of "zipfile.Path" like "namelist()", "iterdir()", etc)
the process can be put into an infinite loop with a maliciously crafted
zip archive. This defect applies when reading only metadata or extracting
the contents of the zip archive. Programs that are not handling
user-controlled zip archives are not affected. |
| An issue was discovered in the demo/LINUXTCP implementation of cwalter-at freemodbus v.2018-09-12 allowing attackers to reach an infinite loop via a crafted length value for a packet. |
| In some circumstances, when DNSdist is configured to use the nghttp2 library to process incoming DNS over HTTPS queries, an attacker might be able to cause a denial of service by crafting a DoH exchange that triggers an unbounded I/O read loop, causing an unexpected consumption of CPU resources. |
| A vulnerability has been identified in SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0) (All versions < V2.3), SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0) (All versions < V2.3), SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0) (All versions < V2.3), SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0) (All versions < V2.4.8), TIM 1531 IRC (6GK7543-1MX00-0XE0) (All versions < V2.4.8). The web server of affected products, if configured to allow the import of PKCS12 containers, could end up in an infinite loop when processing incomplete certificate chains.
This could allow an authenticated remote attacker to create a denial of service condition by importing specially crafted PKCS12 containers. |
| os/linux/elf.rb in Homebrew brew before 4.2.20 uses ldd to load ELF files obtained from untrusted sources, which allows attackers to achieve code execution via an ELF file with a custom .interp section. NOTE: this code execution would occur during an un-sandboxed binary relocation phase, which occurs before a user would expect execution of downloaded package content. (237d1e783f7ee261beaba7d3f6bde22da7148b0a was the tested vulnerable version.) |
| An improper input neutralization vulnerability in the management web interface of the Palo Alto Networks PAN-OS® software enables a malicious authenticated read-write administrator to impersonate another legitimate authenticated PAN-OS administrator.
The attacker must have network access to the management web interface to exploit this issue. You greatly reduce the risk of this issue by restricting access to the management web interface to only trusted internal IP addresses according to our recommended critical deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue does not affect Cloud NGFW and all Prisma® Access instances. |
| A vulnerability in the function that performs IPv4 and IPv6 Network Address Translation (NAT) DNS inspection for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an infinite loop condition that occurs when a Cisco Secure ASA or Cisco Secure FTD device processes DNS packets with DNS inspection enabled and the device is configured for NAT44, NAT64, or NAT46. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static NAT rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to create an infinite loop and cause the device to reload, resulting in a DoS condition. |
| Azle is a WebAssembly runtime for TypeScript and JavaScript on ICP. Calling `setTimer` in Azle versions `0.27.0`, `0.28.0`, and `0.29.0` causes an immediate infinite loop of timers to be executed on the canister, each timer attempting to clean up the global state of the previous timer. The infinite loop will occur with any valid invocation of `setTimer`. The problem has been fixed as of Azle version `0.30.0`. As a workaround, if a canister is caught in this infinite loop after calling `setTimer`, the canister can be upgraded and the timers will all be cleared, thus ending the loop. |
| In GNOME Shell through 45.7, a portal helper can be launched automatically (without user confirmation) based on network responses provided by an adversary (e.g., an adversary who controls the local Wi-Fi network), and subsequently loads untrusted JavaScript code, which may lead to resource consumption or other impacts depending on the JavaScript code's behavior. |
| Tokens in CTFd used for account activation and password resetting can be used interchangeably for these operations. When used, they are sent to the server as a GET parameter and they are not single use, which means, that during token expiration time an on-path attacker might reuse such a token to change user's password and take over the account. Moreover, the tokens also include base64 encoded user email.
This issue impacts releases up to 3.7.4 and was addressed by pull request 2679 https://github.com/CTFd/CTFd/pull/2679 included in 3.7.5 release. |
| OpenDJ is an LDAPv3 compliant directory service. OpenDJ prior to 4.9.3 contains a denial-of-service (DoS) vulnerability that causes the server to become unresponsive to all LDAP requests without crashing or restarting. This issue occurs when an alias loop exists in the LDAP database. If an ldapsearch request is executed with alias dereferencing set to "always" on this alias entry, the server stops responding to all future requests. Fortunately, the server can be restarted without data corruption. This vulnerability is fixed in 4.9.3. |
| A vulnerability in the IKEv2 feature of Cisco IOS Software, IOS XE Software, Secure Firewall ASA Software, and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a DoS condition.
This vulnerability is due to the improper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause an infinite loop that exhausts resources and could cause the device to reload. |
| While assignment of a user to a team (bracket) in CTFd should be possible only once, at the registration, a flaw in logic implementation allows an authenticated user to reset it's bracket and then pick a new one, joining another team while a competition is already ongoing.
This issue impacts releases from 3.7.0 up to 3.7.4 and was addressed by pull request 2636 https://github.com/CTFd/CTFd/pull/2636 included in 3.7.5 release. |
| Loop with unreachable exit condition ('infinite loop') for some Intel(R) Platform within Ring 0: Kernel may allow a denial of service. System software adversary with a privileged user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| A hidden field manipulation vulnerability was identified in Issuetrak version 17.1 that could be triggered by an authenticated user.
When an authenticated user submits a ticket, the request can be intercepted and subsequently modified by using a proxy. The ticket requester can be changed from the original requester to another user in the same application,
which the application then accepts. |
| nanoid (aka Nano ID) before 5.0.9 mishandles non-integer values. 3.3.8 is also a fixed version. |
| Due to a bug in packet data buffers management, the PPP printer in tcpdump can enter an infinite loop when reading a crafted DLT_PPP_SERIAL .pcap savefile. This problem does not affect any tcpdump release, but it affected the git master branch from 2023-06-05 to 2024-03-21. |
| Certain WithSecure products allow a Denial of Service because the engine scanner can go into an infinite loop when processing an archive file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, WithSecure Linux Security 64 12.0, WithSecure Linux Protection 12.0, and WithSecure Atlant 1.0.35-1. |
