| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Stack-based buffer overflow in Windows DNS allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat: avoid invalid nat_net pointer use on failed nf_nat_init()
We ran into below KASAN splat, which is mostly uninteresting, beside
for having nf_nat_register_fn() in the call chain as a cause for the
offending access:
==================================================================
BUG: KASAN: slab-out-of-bounds in nf_nat_register_fn+0x5f9/0x640
Read of size 8 at addr ffff890031e54c20 by task iptables/9510
CPU: 0 UID: 0 PID: 9510 Comm: iptables Not tainted 6.18.18-grsec-full-20260320181326 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
[…] dump_stack_lvl+0xee/0x160 ffff88004117eeb8
[…] print_report+0x6e/0x640 ffff88004117eee0
[…] ? __phys_addr+0x8e/0x140 ffff88004117eef0
[…] ? kasan_addr_to_slab+0x51/0xe0 ffff88004117ef08
[…] ? complete_report_info+0xec/0x1c0 ffff88004117ef20
[…] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef48
[…] kasan_report+0xbc/0x140 ffff88004117ef50
[…] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef90
[…] nf_nat_register_fn+0x5f9/0x640 ffff88004117eff8
[…] ? nf_nat_icmp_reply_translation+0x6e0/0x6e0 ffff88004117f070
[…] nf_tables_register_hook.part.0+0xa0/0x220 ffff88004117f080
[…] nf_tables_addchain.constprop.0+0x1054/0x1fc0 ffff88004117f0b8
[…] ? nft_chain_lookup.part.0+0x4ce/0xac0 ffff88004117f130
[…] ? nf_tables_abort+0x3d80/0x3d80 ffff88004117f190
[…] ? nf_tables_dumpreset_obj+0x100/0x100 ffff88004117f1c8
[…] ? nft_table_lookup.part.0+0x255/0x300 ffff88004117f310
[…] ? nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f358
[…] nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f360
[…] ? nf_tables_addchain.constprop.0+0x1fc0/0x1fc0 ffff88004117f458
[…] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f488
[…] ? lock_acquire+0x16f/0x320 ffff88004117f490
[…] ? find_held_lock+0x3b/0xe0 ffff88004117f4b0
[…] ? __nla_parse+0x45/0x80 ffff88004117f500
[…] nfnetlink_rcv_batch+0xbca/0x19a0 ffff88004117f550
[…] ? nfnetlink_net_exit_batch+0x120/0x120 ffff88004117f618
[…] ? __sanitizer_cov_trace_switch+0x63/0xe0 ffff88004117f720
[…] ? gr_acl_handle_mmap+0x1c4/0x320 ffff88004117f7c0
[…] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f7e8
[…] ? gr_is_capable+0x6f/0xe0 ffff88004117f830
[…] ? __nla_parse+0x45/0x80 ffff88004117f860
[…] ? skb_pull+0x103/0x1a0 ffff88004117f880
[…] nfnetlink_rcv+0x3db/0x4a0 ffff88004117f8b0
[…] ? nfnetlink_rcv_batch+0x19a0/0x19a0 ffff88004117f8d8
[…] ? netlink_lookup+0xe2/0x240 ffff88004117f900
[…] netlink_unicast+0x74b/0xb00 ffff88004117f930
[…] ? netlink_attachskb+0xb20/0xb20 ffff88004117f980
[…] ? __check_object_size+0x3e/0xaa0 ffff88004117f998
[…] ? security_netlink_send+0x51/0x160 ffff88004117f9c8
[…] netlink_sendmsg+0xa03/0x1200 ffff88004117f9f8
[…] ? netlink_unicast+0xb00/0xb00 ffff88004117fa70
[…] ? netlink_unicast+0xb00/0xb00 ffff88004117fac8
[…] ? ____sys_sendmsg+0xe2a/0x1040 ffff88004117faf8
[…] ____sys_sendmsg+0xe2a/0x1040 ffff88004117fb00
[…] ? kernel_recvmsg+0x300/0x300 ffff88004117fb60
[…] ? reacquire_held_locks+0xe9/0x260 ffff88004117fbc8
[…] ___sys_sendmsg+0x138/0x200 ffff88004117fbf8
[…] ? do_recvmmsg+0x7e0/0x7e0 ffff88004117fc30
[…] ? lockdep_hardirqs_on_prepare+0x101/0x1e0 ffff88004117fc50
[…] ? lock_acquire+0x16f/0x320 ffff88004117fd20
[…] ? lock_acquire+0x16f/0x320 ffff88004117fd58
[…] ? find_held_lock+0x3b/0xe0 ffff88004117fd70
[…] __sys_sendmsg+0x17a/0x260 ffff88004117fdc8
[…] ? __sys_sendmsg_sock+0x80/0x80 ffff88004117fdf0
[…] ? syscall_trace_enter+0x15e/0x2c0 ffff88004117fe98
[…] do_syscall_64+0x7d/0x400 ffff88004117fec8
[…] entry_SYSCALL_64_safe_stack+0x4a/0x60 ffff88004117fef8
</TASK>
==================================================================
The out-of-bounds report, though, is a red herring as it is f
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix effective prog array index with BPF_F_PREORDER
replace_effective_prog() and purge_effective_progs() located the slot in
the effective array by walking the program hlist and counting entries
linearly. That count does not match the array layout: compute_effective_
progs() places BPF_F_PREORDER programs at the front (ancestor cgroup
first, attach order within a cgroup) and the rest after them (descendant
cgroup first). So when a preorder program is present, the linear hlist
position no longer equals the program's index in the effective array.
For replace_effective_prog() (bpf_link_update()) this overwrote the
wrong slot, corrupting the effective order. For purge_effective_progs(),
it could dummy out a slot belonging to a different program and leave the
detached program in the array while bpf_prog_put() drops its reference,
i.e. a use-after-free.
Fix both by replaying compute_effective_progs()'s placement (including
the per-cgroup preorder reversal) in a shared effective_prog_pos()
helper. Identify the entry by its struct bpf_prog_list pointer rather
than by (prog, link) value, so the lookup resolves to exactly the
attachment the syscall selected even when the same bpf_prog is attached
to several cgroups in the hierarchy. |
| Heap-based buffer overflow in Windows Brokering File System allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
start and len are u32, so
u64 last = start + len;
evaluates start + len in 32-bit and wraps before storing it in last.
The bounds check
if (start >= offset + l || last > msg->sg.size)
return -EINVAL;
can then be passed with an out-of-range start/len, after which the pop
loop runs off the end of the scatterlist and sk_msg_shift_left() calls
put_page() on the empty msg->sg.end slot:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:sk_msg_shift_left net/core/filter.c:2957 [inline]
RIP: 0010:____bpf_msg_pop_data net/core/filter.c:3103 [inline]
RIP: 0010:bpf_msg_pop_data+0x753/0x1a10 net/core/filter.c:2984
Call Trace:
<TASK>
bpf_prog_4cc92c278f4d5d56+0x1b1/0x1e8
bpf_prog_run_pin_on_cpu+0x107/0x320 include/linux/filter.h:746
sk_psock_msg_verdict+0x357/0x7f0 net/core/skmsg.c:934
tcp_bpf_send_verdict net/ipv4/tcp_bpf.c:420 [inline]
tcp_bpf_sendmsg+0x766/0x1ae0 net/ipv4/tcp_bpf.c:583
__sock_sendmsg+0x153/0x1c0 net/socket.c:802
__sys_sendto+0x326/0x430 net/socket.c:2265
__x64_sys_sendto+0xe3/0x100 net/socket.c:2268
do_syscall_64+0x14c/0x480
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Widen the addition with a (u64) cast so the bound is evaluated in
64-bit and a len near U32_MAX no longer wraps below msg->sg.size.
While here, change pop from int to u32. It counts bytes against the
unsigned scatterlist lengths and can never be negative, so the signed
type only invites sign-confusion in the pop loop. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Guard __get_user acesss with access_ok for uprobe_multi data
As reported by sashiko [1] we need to use access_ok to check the user
space data bounds before we use __get-user to get it.
[1] https://lore.kernel.org/bpf/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its
too-short range validation only checks sb->s_blocksize.
On filesystems with a cluster size larger than the block size, a FITRIM
range that is at least one block but shorter than one cluster is accepted
and shifted down to len == 0. The later start + len - 1 and len -= ...
arithmetic then underflows and can drive trimming past the requested
range.
Reject ranges shorter than s_clustersize instead. That preserves the
existing -EINVAL behavior for requests that cannot discard even one
allocation unit and keeps zero-cluster trims out of the group walk. |
| A vulnerability was determined in Wavlink WN531P3 and WN535M1 V250922. Affected by this vulnerability is the function strcpy of the file /etc/lighttpd/www/cgi-bin/export_pingortrace.cgi of the component Export Pingortrace CGI. Executing a manipulation of the argument HTTP_COOKIE can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure. |
| Dell iDRAC9, versions prior to 7.20.30.50, and Dell iDRAC10, version prior to 1.20.60.50, contain a Remanent Data Readable after Memory Erase vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: add bounds check to run_get_highest_vcn()
run_get_highest_vcn() parses a packed NTFS mapping-pairs buffer without
any length bound, relying solely on a 0x00 terminator to stop. A
crafted $LogFile UpdateMappingPairs record whose embedded attribute
contains mapping-pairs runs without a terminator causes the function to
read past the slab allocation, triggering a KASAN slab-out-of-bounds
read on mount.
The sibling function run_unpack() received an analogous bounds-check in
commit b62567bca474 ("ntfs3: add buffer boundary checks to run_unpack()"),
but run_get_highest_vcn() was missed.
Take a run_buf_size parameter and reject any run header whose payload
would extend past the buffer end, mirroring the pattern used by
run_unpack(). The caller in fslog.c passes the remaining attribute
bytes after the mapping-pairs offset.
KASAN report (on mainline v7.1 merge window HEAD):
BUG: KASAN: slab-out-of-bounds in run_get_highest_vcn+0x3c0/0x410
Read of size 1 at addr ffff88800e2d5400 by task mount/72
Call Trace:
run_get_highest_vcn+0x3c0/0x410
do_action.isra.0+0x3ba8/0x7b50
log_replay+0x9ddd/0x10200
ntfs_loadlog_and_replay+0x4ad/0x610
ntfs_fill_super+0x214a/0x4540 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Check ROM header and data structure addr before accessing
We meet a crash when running stress-ng on x86_64 machine:
BUG: unable to handle page fault for address: ffa0000007f40000
RIP: 0010:pci_get_rom_size+0x52/0x220
Call Trace:
<TASK>
pci_map_rom+0x80/0x130
pci_read_rom+0x4b/0xe0
kernfs_file_read_iter+0x96/0x180
vfs_read+0x1b1/0x300
Our analysis reveals that the ROM space's start address is
0xffa0000007f30000, and size is 0x10000. Because of broken ROM space,
before calling readl(pds), the pds's value is 0xffa0000007f3ffff, which is
already pointed to the ROM space end, invoking readl() would read 4 bytes
therefore cause an out-of-bounds access and trigger a crash. Fix this by
adding image header and data structure checking.
We also found another crash on arm64 machine:
Unable to handle kernel paging request at virtual address ffff8000dd1393ff
Mem abort info:
ESR = 0x0000000096000021
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
The call trace is the same with x86_64, but the crash reason is that the
data structure addr is not aligned with 4, and arm64 machine report
"alignment fault". Fix this by adding alignment checking.
[bhelgaas: shorten function names, wrap comments] |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate fast symlink target during inode read
ocfs2_validate_inode_block() already rejects several inconsistent
self-contained dinodes before they are exposed to the rest of the
filesystem. Fast symlinks need the same treatment.
A zero-cluster symlink is treated as a fast symlink and later read through
page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses
strnlen() on the inline payload and then copies len + 1 bytes into the
folio. If a corrupt dinode stores an i_size that does not fit the inline
area or omits the terminating NUL at i_size, that copy reads past the end
of the inode block buffer.
Reject zero-cluster symlink dinodes whose i_size exceeds the inline
fast-symlink capacity or whose inline payload is not NUL-terminated
exactly at i_size when the inode block is validated. This keeps malformed
fast symlinks from reaching the read path.
Validation reproduced this kernel report:
KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0
RIP: 0033:0x7f5c6d859aa7
Read of size 3905
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xce/0x630 (?:?)
ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x19f/0x330 (?:?)
kasan_report+0xe0/0x110 (?:?)
kasan_check_range+0x105/0x1b0 (?:?)
__asan_memcpy+0x23/0x60 (?:?)
filemap_read_folio+0x27/0xe0 (?:?)
filemap_read_folio+0x35/0xe0 (?:?)
do_read_cache_folio+0x138/0x230 (?:?)
__page_get_link+0x26/0x110 (?:?)
page_get_link+0x2e/0x70 (?:?)
vfs_readlink+0x15e/0x250 (?:?)
touch_atime+0x4d/0x370 (?:?)
do_readlinkat+0x186/0x200 (?:?)
do_user_addr_fault+0x65a/0x890 (?:?)
__x64_sys_readlink+0x46/0x60 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| Initialization of a resource with an insecure default in GitHub Copilot and Visual Studio Code allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: prevent snt_unacked underflow on CONN_ACK
tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count
from the unsigned 16-bit send counter snt_unacked without checking that it
does not exceed the number of messages actually outstanding:
tsk->snt_unacked -= msg_conn_ack(hdr);
msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK
message. If the ack count is larger than snt_unacked, the subtraction
wraps to a near-maximum value, leaving tsk_conn_cong() permanently true
and starving the connection of further transmits.
Validate the ACK count at the start of the CONN_ACK block and drop the
message if it acknowledges more messages than are outstanding. A peer (or,
for a local connection, the connected peer socket) can otherwise wedge a
TIPC connection's send side by sending an oversized connection ack. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: tegra: tegra210_ahub: Validate written enum value
tegra_ahub_put_value_enum() reads e->values[item[0]] before
checking whether item[0] is within the enum item range. The existing
check therefore happens too late to prevent an out-of-range read of the
values array.
Move the check before the array access. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: aiu: Validate written enum values
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix wrong pci_get_drvdata type in AER handlers
rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe
time, but io_error_detected() and io_resume() retrieve it as a
net_device pointer. This causes netif_device_detach/attach to
operate on an ieee80211_hw struct, reading and writing at wrong
offsets. The adjacent io_slot_reset() already does it correctly.
Use ieee80211_stop_queues/wake_queues instead, consistent with
every other queue stop/start path in the driver.
Tested on RTL8852CE by calling the handlers from a test module
before and after the fix. |
| In PHP versions 7.2.x below 7.2.26, 7.3.x below 7.3.13 and 7.4.0, PHP DirectoryIterator class accepts filenames with embedded \0 byte and treats them as terminating at that byte. This could lead to security vulnerabilities, e.g. in applications checking paths that the code is allowed to access. |
| In PHP versions 7.2.x below 7.2.26, 7.3.x below 7.3.13 and 7.4.0 on Windows, PHP link() function accepts filenames with embedded \0 byte and treats them as terminating at that byte. This could lead to security vulnerabilities, e.g. in applications checking paths that the code is allowed to access. |
| When PHP EXIF extension is parsing EXIF information from an image, e.g. via exif_read_data() function, in PHP versions 7.2.x below 7.2.26, 7.3.x below 7.3.13 and 7.4.0 it is possible to supply it with data what will cause it to read past the allocated buffer. This may lead to information disclosure or crash. |
