| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Cash Drawer Protocol Provider allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Encrypting File System (EFS) allows an authorized attacker to elevate privileges locally. |
| Numeric truncation error in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Error Reporting allows an authorized attacker to elevate privileges locally. |
| Improperly implemented security check for standard in Windows PowerShell allows an unauthorized attacker to bypass a security feature over a network. |
| Heap-based buffer overflow in Microsoft Windows Media Foundation allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, Handle destroying table that has a miss table
If a table has a miss table that was created by
'mlx5hws_table_set_default_miss' API function, its miss_tbl
keeps the table that points to it in a list.
If such table is deleted, we need to also remove it from the
miss_tbl list, otherwise the node in miss_tbl list will contain
garbage. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix self-redirect copied_seq double-counting
When a BPF stream_verdict program redirects an skb back to the same
socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply()
calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the
skb is then delivered to the socket's psock ingress queue and later
read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via
the copied_from_self accounting path. This double-counting causes
copied_seq to advance by 2x the actual data length, triggering:
TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \
rcvnxt BF2E806, fl 0
WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640
Call Trace:
tcp_recvmsg+0x10a/0x500
sock_recvmsg+0x168/0x1d0
__sys_recvfrom+0x19a/0x2a0
__x64_sys_recvfrom+0xe4/0x1f0
do_syscall_64+0xf7/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806
WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0
Call Trace:
tcp_recvmsg_locked+0x8d1/0x2640
tcp_recvmsg+0x10a/0x500
sock_recvmsg+0x168/0x1d0
__sys_recvfrom+0x19a/0x2a0
__x64_sys_recvfrom+0xe4/0x1f0
do_syscall_64+0xf7/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by converting self-redirect verdict to __SK_PASS at the
beginning of sk_psock_verdict_apply(). This bypasses the
__SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting
the __SK_PASS path queue the skb to the psock ingress queue. The
data is then read via tcp_bpf_recvmsg_parser(), which advances
copied_seq exactly once through copied_from_self. Cross-socket
redirects continue through __SK_REDIRECT with sk_psock_eat_skb()
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix IRQ injection with SIGP Stop and Store Status
When __inject_sigp_stop() is called for a Stop and Store Status
operation, if the vCPU is running, the interrupt is marked as pending
and the status is stored by the thread performing the KVM_RUN IOCTL.
If the vCPU is already stopped, the status is stored immediately.
Storing the status means writing into userspace, which might fault, and
__inject_sigp_stop() is called from do_inject_vcpu() which in turn is
always called holding a spinlock, which is obviously an issue.
Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and
adding a bool flag to indicate whether a store status is needed. The
callers of do_inject_vcpu() are modified to pass the pointer to the
bool flag; whenever a Store Status operation is needed, the callers can
now perform it outside the spinlock.
Opportunistically refactor kvm_s390_set_irq_state() to use
scoped_guard() and __free().
[ Added Fixes tag while picking -- Claudio ] |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spinand: fix NULL pointer dereference with no ECC engine
When "nand-no-ecc-engine" is set in DT, nanddev_get_ecc_engine() takes
the NAND_ECC_ENGINE_TYPE_NONE path and returns success while leaving
nand->ecc.engine NULL. The SPI-NAND code nevertheless dereferences it
unconditionally to test for a pipelined engine, so probing such a
device oopses immediately.
Rather than open-coding the test three times, add a
nand_ecc_is_pipelined() helper to the NAND core that folds the NULL
check into the integration comparison, and use it everywhere. Future
callers then cannot reintroduce the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Drop unnecessary PMD page copy when freeing
On a box with a discrete GPU, lockdep reports a possible deadlock as
soon as kswapd shrinks the TTM page pool. The immediate cause is an
x86 commit that added an mmap_read_lock() to kernel page protection
munging code.
The huge vmap code holds the same lock over a GFP_KERNEL allocation,
which is a no-no now that reclaim can take it. That allocation is in a
page table *free* path and ends up being for dubious purposes[1].
Basically, it tries to avoid hardware setting Accessed=1 in page table
entries that are unreachable by the hardware, a non-issue.
Remove the PMD copy. Detach the original PMD page at the PUD, flush
the mid-level caches, and free the PTE tables straight from the
detached PMD page. With no allocation left, the locking issue is gone.
Lockdep splat/analysis:
WARNING: possible circular locking dependency detected
7.3.0-rc3-f6e7b42bf05b+ #183 Tainted: G U
------------------------------------------------------
kswapd0/269 is trying to acquire lock:
((init_mm).mmap_lock){++++}-{4:4}, at: change_page_attr_set_clr+0x29a/0x4a0
but task is already holding lock:
(pool_shrink_rwsem){.+.+}-{4:4}, at: ttm_pool_shrink+0xb2/0x330 [ttm]
Chain exists of:
(init_mm).mmap_lock --> fs_reclaim --> pool_shrink_rwsem
The cycle is built from three edges:
1) pool_shrink_rwsem -> (init_mm).mmap_lock
The TTM shrinker restores the caching attribute of every page it
frees, while holding pool_shrink_rwsem:
ttm_pool_shrink()
-> ttm_pool_dispose_list()
-> ttm_pool_free_page()
-> set_pages_wb()
-> change_page_attr_set_clr() [ init_mm mmap read lock ]
2) fs_reclaim -> pool_shrink_rwsem
The same shrinker, called from reclaim.
3) (init_mm).mmap_lock -> fs_reclaim
ioremap() installing a huge PUD mapping over an existing PMD table:
ioremap_page_range()
-> vmap_range_noflush()
-> vmap_try_huge_pud() [ init_mm mmap read lock ]
-> pud_free_pmd_page()
-> __get_free_page(GFP_KERNEL) [ enters reclaim ]
[ dhansen: Lots of changelog munging/trimming and merged comments from my
version of the fix. ] |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: xilinx: fix runtime PM leak on request error path
pm_runtime_get_sync() leaves the usage counter incremented even when it
fails, and xgpio_request() returns the error without dropping it.
gpiolib does not call ->free() when ->request() fails, so xgpio_free(),
which holds the only matching pm_runtime_put(), never runs. The reference
is leaked and the controller can no longer runtime-suspend, so its clock
stays enabled.
Switch to pm_runtime_resume_and_get(), which only increments the usage
counter on success. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: do not warn on route notification size race
fib6_info_hw_flags_set() sizes the skb with rt6_nlmsg_size() and later
fills it with rt6_fill_node(). With nexthop compatibility mode enabled,
a concurrent replacement can grow the group between these independent
snapshots. rt6_fill_node() can then legitimately return -EMSGSIZE, so
the warning does not prove a sizing bug.
Remove the warning. The existing error path still frees the skb and
reports the error to listeners. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: stop route notification sizing when nexthop group shrinks
Commit 680aea08e78c ("net: ipv4: Emit notification when fib
hardware flags are changed") added an RCU-only fib_nlmsg_size() call
for asynchronous hardware flag notifications.
fib_nlmsg_size() checks fib_info_num_path() before each iteration,
then fib_info_nhc() independently reloads nh->nh_grp. If
RTM_NEWNEXTHOP replaces a group with fewer paths between those loads,
fib_info_nhc() returns NULL and fib_nexthop_nlmsg_size() dereferences
it.
Stop sizing when the indexed path is absent. Nexthop groups are
dense, so the current snapshot has no later path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: stop PMTU walk when nexthop group shrinks
Commit 7d3f3b4367f3 ("net: ipv4: Cache pmtu for all packet paths if
multipath enabled") made __ip_rt_update_pmtu() update every path.
For nexthop objects, fib_info_num_path() and fib_info_nhc()
independently load nh->nh_grp. RCU protects each group's lifetime but
does not make the loads observe the same group. If replacement shrinks
the group after the loop accepts an index, fib_info_nhc() returns NULL
and update_or_create_fnhe() dereferences it.
A deterministic probe only widened the existing window between the real
operations. On v7.2, an RTM_NEWNEXTHOP replacement published a
one-member group after the PMTU reader accepted index 1 from a two-member
group, producing:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: update_or_create_fnhe+0x45/0x15b0
Stop when the indexed path is absent. Groups are dense, so no later
index exists in that snapshot. The same real-writer window completed
114,423 PMTU iterations without an oops with this check. A reproducer
is available on request.
Replacement requires CAP_NET_ADMIN in the network namespace. Where
unprivileged user namespaces are permitted, a local user can obtain it
in a new user and network namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use active memslots for the per-vCPU MMIO cache
KVM tags the per-vCPU MMIO cache with a memslot generation so that a
memslot update invalidates cached MMIO information. Both the fill and
validation paths use kvm_memslots(), which unconditionally selects address
space 0, even when the vCPU is running in SMM and using address space 1.
Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the
memslot generation to the cache key so that a memslot update could not
leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM
to the MMU role, support SMRAM address space") added the SMM address space,
these helpers were not converted to use the active memslots.
Consequently, an update to the SMM memslots can leave an entry from the old
SMM address space apparently valid after the vCPU returns to the normal
address space. A guest can then cause an access to valid RAM at the same
GFN to be returned to userspace as KVM_EXIT_MMIO.
Completing that exit through the VMM's RAM address space writes the backing
page without going through KVM's write-tracking path. If the page backs a
nested EPT table, KVM can continue using shadow translations derived from
the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault()
catches this invalid cache and memslot combination.
Use the vCPU's active memslots when caching and validating the entry.
Memslot generations are unique across address spaces, so the generation
also distinguishes the normal and SMM views. This matches the MMIO SPTE
cache, which already uses kvm_vcpu_memslots().
On an unpatched current-mainline kernel, a regression test that fills the
cache in SMM and updates only the SMM memslots fails the intended RAM write
and triggers the kvm_mmu_write_protect_fault() warning. With this change,
the same test completes the RAM write without a warning. The x86/smm_test,
set_memory_region_test, and memslot_modification_stress_test selftests also
pass. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix heap out-of-bounds write in krb5_authenticate()
In krb5_authenticate(), out_len is calculated to determine available
headroom in response_buf for the incoming Kerberos AP-REP token. However,
when SMB2_SESSION_SETUP is processed as a non-first element of a compounded
SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off.
This causes out_len to overstate remaining buffer headroom by
the cumulative size of prior responses in the compound chain. Consequently,
the length check in ksmbd_krb5_authenticate()
(*out_len <= resp->spnego_blob_len) passes erroneously, allowing memcpy()
to write the AP-REP blob past the end of response_buf into adjacent kernel
heap memory.
Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len,
ensuring it accurately reflects physical remaining buffer space. |
| Use after free in Windows Kerberos allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Kernel allows an authorized attacker to elevate privileges locally. |
