| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it. |
| In the Linux kernel, the following vulnerability has been resolved:
memcontrol: ensure memcg acquired by id is properly set up
In the eviction recency check, we attempt to retrieve the memcg to which
the folio belonged when it was evicted, by the memcg id stored in the
shadow entry. However, there is a chance that the retrieved memcg is not
the original memcg that has been killed, but a new one which happens to
have the same id.
This is a somewhat unfortunate, but acceptable and rare inaccuracy in the
heuristics. However, if we retrieve this new memcg between its allocation
and when it is properly attached to the memcg hierarchy, we could run into
the following NULL pointer exception during the memcg hierarchy traversal
done in mem_cgroup_get_nr_swap_pages():
[ 155757.793456] BUG: kernel NULL pointer dereference, address: 00000000000000c0
[ 155757.807568] #PF: supervisor read access in kernel mode
[ 155757.818024] #PF: error_code(0x0000) - not-present page
[ 155757.828482] PGD 401f77067 P4D 401f77067 PUD 401f76067 PMD 0
[ 155757.839985] Oops: 0000 [#1] SMP
[ 155757.887870] RIP: 0010:mem_cgroup_get_nr_swap_pages+0x3d/0xb0
[ 155757.899377] Code: 29 19 4a 02 48 39 f9 74 63 48 8b 97 c0 00 00 00 48 8b b7 58 02 00 00 48 2b b7 c0 01 00 00 48 39 f0 48 0f 4d c6 48 39 d1 74 42 <48> 8b b2 c0 00 00 00 48 8b ba 58 02 00 00 48 2b ba c0 01 00 00 48
[ 155757.937125] RSP: 0018:ffffc9002ecdfbc8 EFLAGS: 00010286
[ 155757.947755] RAX: 00000000003a3b1c RBX: 000007ffffffffff RCX: ffff888280183000
[ 155757.962202] RDX: 0000000000000000 RSI: 0007ffffffffffff RDI: ffff888bbc2d1000
[ 155757.976648] RBP: 0000000000000001 R08: 000000000000000b R09: ffff888ad9cedba0
[ 155757.991094] R10: ffffea0039c07900 R11: 0000000000000010 R12: ffff888b23a7b000
[ 155758.005540] R13: 0000000000000000 R14: ffff888bbc2d1000 R15: 000007ffffc71354
[ 155758.019991] FS: 00007f6234c68640(0000) GS:ffff88903f9c0000(0000) knlGS:0000000000000000
[ 155758.036356] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 155758.048023] CR2: 00000000000000c0 CR3: 0000000a83eb8004 CR4: 00000000007706e0
[ 155758.062473] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 155758.076924] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 155758.091376] PKRU: 55555554
[ 155758.096957] Call Trace:
[ 155758.102016] <TASK>
[ 155758.106502] ? __die+0x78/0xc0
[ 155758.112793] ? page_fault_oops+0x286/0x380
[ 155758.121175] ? exc_page_fault+0x5d/0x110
[ 155758.129209] ? asm_exc_page_fault+0x22/0x30
[ 155758.137763] ? mem_cgroup_get_nr_swap_pages+0x3d/0xb0
[ 155758.148060] workingset_test_recent+0xda/0x1b0
[ 155758.157133] workingset_refault+0xca/0x1e0
[ 155758.165508] filemap_add_folio+0x4d/0x70
[ 155758.173538] page_cache_ra_unbounded+0xed/0x190
[ 155758.182919] page_cache_sync_ra+0xd6/0x1e0
[ 155758.191738] filemap_read+0x68d/0xdf0
[ 155758.199495] ? mlx5e_napi_poll+0x123/0x940
[ 155758.207981] ? __napi_schedule+0x55/0x90
[ 155758.216095] __x64_sys_pread64+0x1d6/0x2c0
[ 155758.224601] do_syscall_64+0x3d/0x80
[ 155758.232058] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 155758.242473] RIP: 0033:0x7f62c29153b5
[ 155758.249938] Code: e8 48 89 75 f0 89 7d f8 48 89 4d e0 e8 b4 e6 f7 ff 41 89 c0 4c 8b 55 e0 48 8b 55 e8 48 8b 75 f0 8b 7d f8 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 45 f8 e8 e7 e6 f7 ff 48 8b
[ 155758.288005] RSP: 002b:00007f6234c5ffd0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011
[ 155758.303474] RAX: ffffffffffffffda RBX: 00007f628c4e70c0 RCX: 00007f62c29153b5
[ 155758.318075] RDX: 000000000003c041 RSI: 00007f61d2986000 RDI: 0000000000000076
[ 155758.332678] RBP: 00007f6234c5fff0 R08: 0000000000000000 R09: 0000000064d5230c
[ 155758.347452] R10: 000000000027d450 R11: 0000000000000293 R12: 000000000003c041
[ 155758.362044] R13: 00007f61d2986000 R14: 00007f629e11b060 R15: 000000000027d450
[ 155758.376661] </TASK>
This patch fixes the issue by moving the memcg's id publication from the
alloc stage to
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Take RTNL lock when needed before calling xdp_set_features()
Hold RTNL lock when calling xdp_set_features() with a registered netdev,
as the call triggers the netdev notifiers. This could happen when
switching from uplink rep to nic profile for example.
This resolves the following call trace:
RTNL: assertion failed at net/core/dev.c (1953)
WARNING: CPU: 6 PID: 112670 at net/core/dev.c:1953 call_netdevice_notifiers_info+0x7c/0x80
Modules linked in: sch_mqprio sch_mqprio_lib act_tunnel_key act_mirred act_skbedit cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress bonding ib_umad ip_gre rdma_ucm mlx5_vfio_pci ipip tunnel4 ip6_gre gre mlx5_ib vfio_pci vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ib_ipoib geneve nf_tables ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]
CPU: 6 PID: 112670 Comm: devlink Not tainted 6.4.0-rc7_for_upstream_min_debug_2023_06_28_17_02 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80
Code: 90 ff 80 3d 2d 6b f7 00 00 75 c5 ba a1 07 00 00 48 c7 c6 e4 ce 0b 82 48 c7 c7 c8 f4 04 82 c6 05 11 6b f7 00 01 e8 a4 7c 8e ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec
RSP: 0018:ffff8882a21c3948 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff82e6f880 RCX: 0000000000000027
RDX: ffff88885f99b5c8 RSI: 0000000000000001 RDI: ffff88885f99b5c0
RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003
R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff8882a21c3968
R13: ffff88811c018940 R14: 0000000000000000 R15: ffff8881274401a0
FS: 00007fe141c81800(0000) GS:ffff88885f980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f787c28b948 CR3: 000000014bcf3005 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x79/0x120
? call_netdevice_notifiers_info+0x7c/0x80
? report_bug+0x17c/0x190
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? call_netdevice_notifiers_info+0x7c/0x80
? call_netdevice_notifiers_info+0x7c/0x80
call_netdevice_notifiers+0x2e/0x50
mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core]
mlx5e_nic_init+0xf1/0x1a0 [mlx5_core]
mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core]
mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core]
mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
mlx5e_vport_rep_unload+0xaa/0xc0 [mlx5_core]
__esw_offloads_unload_rep+0x52/0x60 [mlx5_core]
mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core]
esw_offloads_unload_rep+0x34/0x70 [mlx5_core]
esw_offloads_disable+0x2b/0x90 [mlx5_core]
mlx5_eswitch_disable_locked+0x1b9/0x210 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0xf5/0x630 [mlx5_core]
? devlink_get_from_attrs_lock+0x9e/0x110
devlink_nl_cmd_eswitch_set_doit+0x60/0xe0
genl_family_rcv_msg_doit.isra.0+0xc2/0x110
genl_rcv_msg+0x17d/0x2b0
? devlink_get_from_attrs_lock+0x110/0x110
? devlink_nl_cmd_eswitch_get_doit+0x290/0x290
? devlink_pernet_pre_exit+0xf0/0xf0
? genl_family_rcv_msg_doit.isra.0+0x110/0x110
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1f6/0x2c0
netlink_sendmsg+0x232/0x4a0
sock_sendmsg+0x38/0x60
? _copy_from_user+0x2a/0x60
__sys_sendto+0x110/0x160
? __count_memcg_events+0x48/0x90
? handle_mm_fault+0x161/0x260
? do_user_addr_fault+0x278/0x6e0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata
Following concurrent processes:
P1(drop cache) P2(kworker)
drop_caches_sysctl_handler
drop_slab
shrink_slab
down_read(&shrinker_rwsem) - LOCK A
do_shrink_slab
super_cache_scan
prune_icache_sb
dispose_list
evict
ext4_evict_inode
ext4_clear_inode
ext4_discard_preallocations
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_read_bh_nowait
submit_bh
dm_submit_bio
do_worker
process_deferred_bios
commit
metadata_operation_failed
dm_pool_abort_metadata
down_write(&pmd->root_lock) - LOCK B
__destroy_persistent_data_objects
dm_block_manager_destroy
dm_bufio_client_destroy
unregister_shrinker
down_write(&shrinker_rwsem)
thin_map |
dm_thin_find_block ↓
down_read(&pmd->root_lock) --> ABBA deadlock
, which triggers hung task:
[ 76.974820] INFO: task kworker/u4:3:63 blocked for more than 15 seconds.
[ 76.976019] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910
[ 76.978521] task:kworker/u4:3 state:D stack:0 pid:63 ppid:2
[ 76.978534] Workqueue: dm-thin do_worker
[ 76.978552] Call Trace:
[ 76.978564] __schedule+0x6ba/0x10f0
[ 76.978582] schedule+0x9d/0x1e0
[ 76.978588] rwsem_down_write_slowpath+0x587/0xdf0
[ 76.978600] down_write+0xec/0x110
[ 76.978607] unregister_shrinker+0x2c/0xf0
[ 76.978616] dm_bufio_client_destroy+0x116/0x3d0
[ 76.978625] dm_block_manager_destroy+0x19/0x40
[ 76.978629] __destroy_persistent_data_objects+0x5e/0x70
[ 76.978636] dm_pool_abort_metadata+0x8e/0x100
[ 76.978643] metadata_operation_failed+0x86/0x110
[ 76.978649] commit+0x6a/0x230
[ 76.978655] do_worker+0xc6e/0xd90
[ 76.978702] process_one_work+0x269/0x630
[ 76.978714] worker_thread+0x266/0x630
[ 76.978730] kthread+0x151/0x1b0
[ 76.978772] INFO: task test.sh:2646 blocked for more than 15 seconds.
[ 76.979756] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910
[ 76.982111] task:test.sh state:D stack:0 pid:2646 ppid:2459
[ 76.982128] Call Trace:
[ 76.982139] __schedule+0x6ba/0x10f0
[ 76.982155] schedule+0x9d/0x1e0
[ 76.982159] rwsem_down_read_slowpath+0x4f4/0x910
[ 76.982173] down_read+0x84/0x170
[ 76.982177] dm_thin_find_block+0x4c/0xd0
[ 76.982183] thin_map+0x201/0x3d0
[ 76.982188] __map_bio+0x5b/0x350
[ 76.982195] dm_submit_bio+0x2b6/0x930
[ 76.982202] __submit_bio+0x123/0x2d0
[ 76.982209] submit_bio_noacct_nocheck+0x101/0x3e0
[ 76.982222] submit_bio_noacct+0x389/0x770
[ 76.982227] submit_bio+0x50/0xc0
[ 76.982232] submit_bh_wbc+0x15e/0x230
[ 76.982238] submit_bh+0x14/0x20
[ 76.982241] ext4_read_bh_nowait+0xc5/0x130
[ 76.982247] ext4_read_block_bitmap_nowait+0x340/0xc60
[ 76.982254] ext4_mb_init_cache+0x1ce/0xdc0
[ 76.982259] ext4_mb_load_buddy_gfp+0x987/0xfa0
[ 76.982263] ext4_discard_preallocations+0x45d/0x830
[ 76.982274] ext4_clear_inode+0x48/0xf0
[ 76.982280] ext4_evict_inode+0xcf/0xc70
[ 76.982285] evict+0x119/0x2b0
[ 76.982290] dispose_list+0x43/0xa0
[ 76.982294] prune_icache_sb+0x64/0x90
[ 76.982298] super_cache_scan+0x155/0x210
[ 76.982303] do_shrink_slab+0x19e/0x4e0
[ 76.982310] shrink_slab+0x2bd/0x450
[ 76.982317] drop_slab+0xcc/0x1a0
[ 76.982323] drop_caches_sysctl_handler+0xb7/0xe0
[ 76.982327] proc_sys_call_handler+0x1bc/0x300
[ 76.982331] proc_sys_write+0x17/0x20
[ 76.982334] vfs_write+0x3d3/0x570
[ 76.982342] ksys_write+0x73/0x160
[ 76.982347] __x64_sys_write+0x1e/0x30
[ 76.982352] do_syscall_64+0x35/0x80
[ 76.982357] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Funct
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: amphion: fix REVERSE_INULL issues reported by coverity
null-checking of a pointor is suggested before dereferencing it |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Make bpf_refcount_acquire fallible for non-owning refs
This patch fixes an incorrect assumption made in the original
bpf_refcount series [0], specifically that the BPF program calling
bpf_refcount_acquire on some node can always guarantee that the node is
alive. In that series, the patch adding failure behavior to rbtree_add
and list_push_{front, back} breaks this assumption for non-owning
references.
Consider the following program:
n = bpf_kptr_xchg(&mapval, NULL);
/* skip error checking */
bpf_spin_lock(&l);
if(bpf_rbtree_add(&t, &n->rb, less)) {
bpf_refcount_acquire(n);
/* Failed to add, do something else with the node */
}
bpf_spin_unlock(&l);
It's incorrect to assume that bpf_refcount_acquire will always succeed in this
scenario. bpf_refcount_acquire is being called in a critical section
here, but the lock being held is associated with rbtree t, which isn't
necessarily the lock associated with the tree that the node is already
in. So after bpf_rbtree_add fails to add the node and calls bpf_obj_drop
in it, the program has no ownership of the node's lifetime. Therefore
the node's refcount can be decr'd to 0 at any time after the failing
rbtree_add. If this happens before the refcount_acquire above, the node
might be free'd, and regardless refcount_acquire will be incrementing a
0 refcount.
Later patches in the series exercise this scenario, resulting in the
expected complaint from the kernel (without this patch's changes):
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 207 at lib/refcount.c:25 refcount_warn_saturate+0xbc/0x110
Modules linked in: bpf_testmod(O)
CPU: 1 PID: 207 Comm: test_progs Tainted: G O 6.3.0-rc7-02231-g723de1a718a2-dirty #371
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0xbc/0x110
Code: 6f 64 f6 02 01 e8 84 a3 5c ff 0f 0b eb 9d 80 3d 5e 64 f6 02 00 75 94 48 c7 c7 e0 13 d2 82 c6 05 4e 64 f6 02 01 e8 64 a3 5c ff <0f> 0b e9 7a ff ff ff 80 3d 38 64 f6 02 00 0f 85 6d ff ff ff 48 c7
RSP: 0018:ffff88810b9179b0 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000202 RSI: 0000000000000008 RDI: ffffffff857c3680
RBP: ffff88810027d3c0 R08: ffffffff8125f2a4 R09: ffff88810b9176e7
R10: ffffed1021722edc R11: 746e756f63666572 R12: ffff88810027d388
R13: ffff88810027d3c0 R14: ffffc900005fe030 R15: ffffc900005fe048
FS: 00007fee0584a700(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005634a96f6c58 CR3: 0000000108ce9002 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
bpf_refcount_acquire_impl+0xb5/0xc0
(rest of output snipped)
The patch addresses this by changing bpf_refcount_acquire_impl to use
refcount_inc_not_zero instead of refcount_inc and marking
bpf_refcount_acquire KF_RET_NULL.
For owning references, though, we know the above scenario is not possible
and thus that bpf_refcount_acquire will always succeed. Some verifier
bookkeeping is added to track "is input owning ref?" for bpf_refcount_acquire
calls and return false from is_kfunc_ret_null for bpf_refcount_acquire on
owning refs despite it being marked KF_RET_NULL.
Existing selftests using bpf_refcount_acquire are modified where
necessary to NULL-check its return value.
[0]: https://lore.kernel.org/bpf/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix deadloop issue on reading trace_pipe
Soft lockup occurs when reading file 'trace_pipe':
watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [cat:4488]
[...]
RIP: 0010:ring_buffer_empty_cpu+0xed/0x170
RSP: 0018:ffff88810dd6fc48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff93d1aaeb
RDX: ffff88810a280040 RSI: 0000000000000008 RDI: ffff88811164b218
RBP: ffff88811164b218 R08: 0000000000000000 R09: ffff88815156600f
R10: ffffed102a2acc01 R11: 0000000000000001 R12: 0000000051651901
R13: 0000000000000000 R14: ffff888115e49500 R15: 0000000000000000
[...]
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8d853c2000 CR3: 000000010dcd8000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__find_next_entry+0x1a8/0x4b0
? peek_next_entry+0x250/0x250
? down_write+0xa5/0x120
? down_write_killable+0x130/0x130
trace_find_next_entry_inc+0x3b/0x1d0
tracing_read_pipe+0x423/0xae0
? tracing_splice_read_pipe+0xcb0/0xcb0
vfs_read+0x16b/0x490
ksys_read+0x105/0x210
? __ia32_sys_pwrite64+0x200/0x200
? switch_fpu_return+0x108/0x220
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Through the vmcore, I found it's because in tracing_read_pipe(),
ring_buffer_empty_cpu() found some buffer is not empty but then it
cannot read anything due to "rb_num_of_entries() == 0" always true,
Then it infinitely loop the procedure due to user buffer not been
filled, see following code path:
tracing_read_pipe() {
... ...
waitagain:
tracing_wait_pipe() // 1. find non-empty buffer here
trace_find_next_entry_inc() // 2. loop here try to find an entry
__find_next_entry()
ring_buffer_empty_cpu(); // 3. find non-empty buffer
peek_next_entry() // 4. but peek always return NULL
ring_buffer_peek()
rb_buffer_peek()
rb_get_reader_page()
// 5. because rb_num_of_entries() == 0 always true here
// then return NULL
// 6. user buffer not been filled so goto 'waitgain'
// and eventually leads to an deadloop in kernel!!!
}
By some analyzing, I found that when resetting ringbuffer, the 'entries'
of its pages are not all cleared (see rb_reset_cpu()). Then when reducing
the ringbuffer, and if some reduced pages exist dirty 'entries' data, they
will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which
cause wrong 'overrun' count and eventually cause the deadloop issue.
To fix it, we need to clear every pages in rb_reset_cpu(). |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Add validation before accessing cgx and lmac
with the addition of new MAC blocks like CN10K RPM and CN10KB
RPM_USX, LMACs are noncontiguous and CGX blocks are also
noncontiguous. But during RVU driver initialization, the driver
is assuming they are contiguous and trying to access
cgx or lmac with their id which is resulting in kernel panic.
This patch fixes the issue by adding proper checks.
[ 23.219150] pc : cgx_lmac_read+0x38/0x70
[ 23.219154] lr : rvu_program_channels+0x3f0/0x498
[ 23.223852] sp : ffff000100d6fc80
[ 23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:
000000000000005a
[ 23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:
fffffffffff0f000 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: hif_usb: fix memory leak of remain_skbs
hif_dev->remain_skb is allocated and used exclusively in
ath9k_hif_usb_rx_stream(). It is implied that an allocated remain_skb is
processed and subsequently freed (in error paths) only during the next
call of ath9k_hif_usb_rx_stream().
So, if the urbs are deallocated between those two calls due to the device
deinitialization or suspend, it is possible that ath9k_hif_usb_rx_stream()
is not called next time and the allocated remain_skb is leaked. Our local
Syzkaller instance was able to trigger that.
remain_skb makes sense when receiving two consecutive urbs which are
logically linked together, i.e. a specific data field from the first skb
indicates a cached skb to be allocated, memcpy'd with some data and
subsequently processed in the next call to ath9k_hif_usb_rx_stream(). Urbs
deallocation supposedly makes that link irrelevant so we need to free the
cached skb in those cases.
Fix the leak by introducing a function to explicitly free remain_skb (if
it is not NULL) when the rx urbs have been deallocated. remain_skb is NULL
when it has not been allocated at all (hif_dev struct is kzalloced) or
when it has been processed in next call to ath9k_hif_usb_rx_stream().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Don't dereference ACPI root object handle
Since the commit referenced in the Fixes: tag below the VMBus client driver
is walking the ACPI namespace up from the VMBus ACPI device to the ACPI
namespace root object trying to find Hyper-V MMIO ranges.
However, if it is not able to find them it ends trying to walk resources of
the ACPI namespace root object itself.
This object has all-ones handle, which causes a NULL pointer dereference
in the ACPI code (from dereferencing this pointer with an offset).
This in turn causes an oops on boot with VMBus host implementations that do
not provide Hyper-V MMIO ranges in their VMBus ACPI device or its
ancestors.
The QEMU VMBus implementation is an example of such implementation.
I guess providing these ranges is optional, since all tested Windows
versions seem to be able to use VMBus devices without them.
Fix this by explicitly terminating the lookup at the ACPI namespace root
object.
Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interface
by default - they only do so if the KVM PV interface is missing or
disabled.
Example stack trace of such oops:
[ 3.710827] ? __die+0x1f/0x60
[ 3.715030] ? page_fault_oops+0x159/0x460
[ 3.716008] ? exc_page_fault+0x73/0x170
[ 3.716959] ? asm_exc_page_fault+0x22/0x30
[ 3.717957] ? acpi_ns_lookup+0x7a/0x4b0
[ 3.718898] ? acpi_ns_internalize_name+0x79/0xc0
[ 3.720018] acpi_ns_get_node_unlocked+0xb5/0xe0
[ 3.721120] ? acpi_ns_check_object_type+0xfe/0x200
[ 3.722285] ? acpi_rs_convert_aml_to_resource+0x37/0x6e0
[ 3.723559] ? down_timeout+0x3a/0x60
[ 3.724455] ? acpi_ns_get_node+0x3a/0x60
[ 3.725412] acpi_ns_get_node+0x3a/0x60
[ 3.726335] acpi_ns_evaluate+0x1c3/0x2c0
[ 3.727295] acpi_ut_evaluate_object+0x64/0x1b0
[ 3.728400] acpi_rs_get_method_data+0x2b/0x70
[ 3.729476] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.730940] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.732411] acpi_walk_resources+0x78/0xd0
[ 3.733398] vmbus_platform_driver_probe+0x9f/0x1d0 [hv_vmbus]
[ 3.734802] platform_probe+0x3d/0x90
[ 3.735684] really_probe+0x19b/0x400
[ 3.736570] ? __device_attach_driver+0x100/0x100
[ 3.737697] __driver_probe_device+0x78/0x160
[ 3.738746] driver_probe_device+0x1f/0x90
[ 3.739743] __driver_attach+0xc2/0x1b0
[ 3.740671] bus_for_each_dev+0x70/0xc0
[ 3.741601] bus_add_driver+0x10e/0x210
[ 3.742527] driver_register+0x55/0xf0
[ 3.744412] ? 0xffffffffc039a000
[ 3.745207] hv_acpi_init+0x3c/0x1000 [hv_vmbus] |
| In the Linux kernel, the following vulnerability has been resolved:
Input: exc3000 - properly stop timer on shutdown
We need to stop the timer on driver unbind or probe failures, otherwise
we get UAF/Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than
the calculated "min" value, but greater than zero, the logic sets
tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in
cdc_ncm_fill_tx_frame() where all the data is handled.
For small values of dwNtbOutMaxSize the memory allocated during
alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to
how size is aligned at alloc time:
size = SKB_DATA_ALIGN(size);
size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
Thus we hit the same bug that we tried to squash with
commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")
Low values of dwNtbOutMaxSize do not cause an issue presently because at
alloc_skb() time more memory (512b) is allocated than required for the
SKB headers alone (320b), leaving some space (512b - 320b = 192b)
for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:113!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic net/core/skbuff.c:113 [inline]
RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118
[snip]
Call Trace:
<TASK>
skb_put+0x151/0x210 net/core/skbuff.c:2047
skb_put_zero include/linux/skbuff.h:2422 [inline]
cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline]
cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308
cdc_ncm_tx_fixup+0xa3/0x100
Deal with too low values of dwNtbOutMaxSize, clamp it in the range
[USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure
enough data space is allocated to handle CDC data by making sure
dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix memory leaks in ext4_fname_{setup_filename,prepare_lookup}
If the filename casefolding fails, we'll be leaking memory from the
fscrypt_name struct, namely from the 'crypto_buf.name' member.
Make sure we free it in the error path on both ext4_fname_setup_filename()
and ext4_fname_prepare_lookup() functions. |
| In the Linux kernel, the following vulnerability has been resolved:
md: don't dereference mddev after export_rdev()
Except for initial reference, mddev->kobject is referenced by
rdev->kobject, and if the last rdev is freed, there is no guarantee that
mddev is still valid. Hence mddev should not be used anymore after
export_rdev().
This problem can be triggered by following test for mdadm at very
low rate:
New file: mdadm/tests/23rdev-lifetime
devname=${dev0##*/}
devt=`cat /sys/block/$devname/dev`
pid=""
runtime=2
clean_up_test() {
pill -9 $pid
echo clear > /sys/block/md0/md/array_state
}
trap 'clean_up_test' EXIT
add_by_sysfs() {
while true; do
echo $devt > /sys/block/md0/md/new_dev
done
}
remove_by_sysfs(){
while true; do
echo remove > /sys/block/md0/md/dev-${devname}/state
done
}
echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed"
add_by_sysfs &
pid="$pid $!"
remove_by_sysfs &
pid="$pid $!"
sleep $runtime
exit 0
Test cmd:
./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime
Test result:
general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bcb: 0000 [#4] PREEMPT SMP
CPU: 0 PID: 1292 Comm: test Tainted: G D W 6.5.0-rc2-00121-g01e55c376936 #562
RIP: 0010:md_wakeup_thread+0x9e/0x320 [md_mod]
Call Trace:
<TASK>
mddev_unlock+0x1b6/0x310 [md_mod]
rdev_attr_store+0xec/0x190 [md_mod]
sysfs_kf_write+0x52/0x70
kernfs_fop_write_iter+0x19a/0x2a0
vfs_write+0x3b5/0x770
ksys_write+0x74/0x150
__x64_sys_write+0x22/0x30
do_syscall_64+0x40/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fix this problem by don't dereference mddev after export_rdev(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: bcm-qspi: return error if neither hif_mspi nor mspi is available
If neither a "hif_mspi" nor "mspi" resource is present, the driver will
just early exit in probe but still return success. Apart from not doing
anything meaningful, this would then also lead to a null pointer access
on removal, as platform_get_drvdata() would return NULL, which it would
then try to dereference when trying to unregister the spi master.
Fix this by unconditionally calling devm_ioremap_resource(), as it can
handle a NULL res and will then return a viable ERR_PTR() if we get one.
The "return 0;" was previously a "goto qspi_resource_err;" where then
ret was returned, but since ret was still initialized to 0 at this place
this was a valid conversion in 63c5395bb7a9 ("spi: bcm-qspi: Fix
use-after-free on unbind"). The issue was not introduced by this commit,
only made more obvious. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: Fix out-of-bounds when setting channels on remove
If we set channels greater during iavf_remove(), and waiting reset done
would be timeout, then returned with error but changed num_active_queues
directly, that will lead to OOB like the following logs. Because the
num_active_queues is greater than tx/rx_rings[] allocated actually.
Reproducer:
[root@host ~]# cat repro.sh
#!/bin/bash
pf_dbsf="0000:41:00.0"
vf0_dbsf="0000:41:02.0"
g_pids=()
function do_set_numvf()
{
echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
sleep $((RANDOM%3+1))
echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
sleep $((RANDOM%3+1))
}
function do_set_channel()
{
local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/)
[ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; }
ifconfig $nic 192.168.18.5 netmask 255.255.255.0
ifconfig $nic up
ethtool -L $nic combined 1
ethtool -L $nic combined 4
sleep $((RANDOM%3))
}
function on_exit()
{
local pid
for pid in "${g_pids[@]}"; do
kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null
done
g_pids=()
}
trap "on_exit; exit" EXIT
while :; do do_set_numvf ; done &
g_pids+=($!)
while :; do do_set_channel ; done &
g_pids+=($!)
wait
Result:
[ 3506.152887] iavf 0000:41:02.0: Removing device
[ 3510.400799] ==================================================================
[ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536
[ 3510.400823]
[ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1
[ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021
[ 3510.400835] Call Trace:
[ 3510.400851] dump_stack+0x71/0xab
[ 3510.400860] print_address_description+0x6b/0x290
[ 3510.400865] ? iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400868] kasan_report+0x14a/0x2b0
[ 3510.400873] iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400880] iavf_remove+0x2b6/0xc70 [iavf]
[ 3510.400884] ? iavf_free_all_rx_resources+0x160/0x160 [iavf]
[ 3510.400891] ? wait_woken+0x1d0/0x1d0
[ 3510.400895] ? notifier_call_chain+0xc1/0x130
[ 3510.400903] pci_device_remove+0xa8/0x1f0
[ 3510.400910] device_release_driver_internal+0x1c6/0x460
[ 3510.400916] pci_stop_bus_device+0x101/0x150
[ 3510.400919] pci_stop_and_remove_bus_device+0xe/0x20
[ 3510.400924] pci_iov_remove_virtfn+0x187/0x420
[ 3510.400927] ? pci_iov_add_virtfn+0xe10/0xe10
[ 3510.400929] ? pci_get_subsys+0x90/0x90
[ 3510.400932] sriov_disable+0xed/0x3e0
[ 3510.400936] ? bus_find_device+0x12d/0x1a0
[ 3510.400953] i40e_free_vfs+0x754/0x1210 [i40e]
[ 3510.400966] ? i40e_reset_all_vfs+0x880/0x880 [i40e]
[ 3510.400968] ? pci_get_device+0x7c/0x90
[ 3510.400970] ? pci_get_subsys+0x90/0x90
[ 3510.400982] ? pci_vfs_assigned.part.7+0x144/0x210
[ 3510.400987] ? __mutex_lock_slowpath+0x10/0x10
[ 3510.400996] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e]
[ 3510.401001] sriov_numvfs_store+0x214/0x290
[ 3510.401005] ? sriov_totalvfs_show+0x30/0x30
[ 3510.401007] ? __mutex_lock_slowpath+0x10/0x10
[ 3510.401011] ? __check_object_size+0x15a/0x350
[ 3510.401018] kernfs_fop_write+0x280/0x3f0
[ 3510.401022] vfs_write+0x145/0x440
[ 3510.401025] ksys_write+0xab/0x160
[ 3510.401028] ? __ia32_sys_read+0xb0/0xb0
[ 3510.401031] ? fput_many+0x1a/0x120
[ 3510.401032] ? filp_close+0xf0/0x130
[ 3510.401038] do_syscall_64+0xa0/0x370
[ 3510.401041] ? page_fault+0x8/0x30
[ 3510.401043] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 3510.401073] RIP: 0033:0x7f3a9bb842c0
[ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: fix null-ptr-deref in handshake_nl_done_doit()
We should not call trace_handshake_cmd_done_err() if socket lookup has failed.
Also we should call trace_handshake_cmd_done_err() before releasing the file,
otherwise dereferencing sock->sk can return garbage.
This also reverts 7afc6d0a107f ("net/handshake: Fix uninitialized local variable")
Unable to handle kernel paging request at virtual address dfff800000000003
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfff800000000003] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 5986 Comm: syz-executor292 Not tainted 6.5.0-rc7-syzkaller-gfe4469582053 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193
lr : handshake_nl_done_doit+0x180/0x9c8
sp : ffff800096e37180
x29: ffff800096e37200 x28: 1ffff00012dc6e34 x27: dfff800000000000
x26: ffff800096e373d0 x25: 0000000000000000 x24: 00000000ffffffa8
x23: ffff800096e373f0 x22: 1ffff00012dc6e38 x21: 0000000000000000
x20: ffff800096e371c0 x19: 0000000000000018 x18: 0000000000000000
x17: 0000000000000000 x16: ffff800080516cc4 x15: 0000000000000001
x14: 1fffe0001b14aa3b x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000003
x8 : 0000000000000003 x7 : ffff800080afe47c x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800080a88078
x2 : 0000000000000001 x1 : 00000000ffffffa8 x0 : 0000000000000000
Call trace:
handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193
genl_family_rcv_msg_doit net/netlink/genetlink.c:970 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1050 [inline]
genl_rcv_msg+0x96c/0xc50 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2549
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1078
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x834/0xb18 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x56c/0x840 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2577
__do_sys_sendmsg net/socket.c:2586 [inline]
__se_sys_sendmsg net/socket.c:2584 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2584
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: 12800108 b90043e8 910062b3 d343fe68 (387b6908) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, cpumap: Handle skb as well when clean up ptr_ring
The following warning was reported when running xdp_redirect_cpu with
both skb-mode and stress-mode enabled:
------------[ cut here ]------------
Incorrect XDP memory type (-2128176192) usage
WARNING: CPU: 7 PID: 1442 at net/core/xdp.c:405
Modules linked in:
CPU: 7 PID: 1442 Comm: kworker/7:0 Tainted: G 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events __cpu_map_entry_free
RIP: 0010:__xdp_return+0x1e4/0x4a0
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
? __xdp_return+0x1e4/0x4a0
......
xdp_return_frame+0x4d/0x150
__cpu_map_entry_free+0xf9/0x230
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The reason for the warning is twofold. One is due to the kthread
cpu_map_kthread_run() is stopped prematurely. Another one is
__cpu_map_ring_cleanup() doesn't handle skb mode and treats skbs in
ptr_ring as XDP frames.
Prematurely-stopped kthread will be fixed by the preceding patch and
ptr_ring will be empty when __cpu_map_ring_cleanup() is called. But
as the comments in __cpu_map_ring_cleanup() said, handling and freeing
skbs in ptr_ring as well to "catch any broken behaviour gracefully". |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: Fix potential null ptr dereference in dev_pm_opp_get_required_pstate()
"opp" pointer is dereferenced before the IS_ERR_OR_NULL() check. Fix it by
removing the dereference to cache opp_table and dereference it directly
where opp_table is used.
This fixes the following smatch warning:
drivers/opp/core.c:232 dev_pm_opp_get_required_pstate() warn: variable
dereferenced before IS_ERR check 'opp' (see line 230) |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
Registering a kprobe on __rcu_irq_enter_check_tick() can cause kernel
stack overflow as shown below. This issue can be reproduced by enabling
CONFIG_NO_HZ_FULL and booting the kernel with argument "nohz_full=",
and then giving the following commands at the shell prompt:
# cd /sys/kernel/tracing/
# echo 'p:mp1 __rcu_irq_enter_check_tick' >> kprobe_events
# echo 1 > events/kprobes/enable
This commit therefore adds __rcu_irq_enter_check_tick() to the kprobes
blacklist using NOKPROBE_SYMBOL().
Insufficient stack space to handle exception!
ESR: 0x00000000f2000004 -- BRK (AArch64)
FAR: 0x0000ffffccf3e510
Task stack: [0xffff80000ad30000..0xffff80000ad38000]
IRQ stack: [0xffff800008050000..0xffff800008058000]
Overflow stack: [0xffff089c36f9f310..0xffff089c36fa0310]
CPU: 5 PID: 190 Comm: bash Not tainted 6.2.0-rc2-00320-g1f5abbd77e2c #19
Hardware name: linux,dummy-virt (DT)
pstate: 400003c5 (nZcv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __rcu_irq_enter_check_tick+0x0/0x1b8
lr : ct_nmi_enter+0x11c/0x138
sp : ffff80000ad30080
x29: ffff80000ad30080 x28: ffff089c82e20000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff089c02a8d100 x24: 0000000000000000
x23: 00000000400003c5 x22: 0000ffffccf3e510 x21: ffff089c36fae148
x20: ffff80000ad30120 x19: ffffa8da8fcce148 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffffa8da8e44ea6c
x14: ffffa8da8e44e968 x13: ffffa8da8e03136c x12: 1fffe113804d6809
x11: ffff6113804d6809 x10: 0000000000000a60 x9 : dfff800000000000
x8 : ffff089c026b404f x7 : 00009eec7fb297f7 x6 : 0000000000000001
x5 : ffff80000ad30120 x4 : dfff800000000000 x3 : ffffa8da8e3016f4
x2 : 0000000000000003 x1 : 0000000000000000 x0 : 0000000000000000
Kernel panic - not syncing: kernel stack overflow
CPU: 5 PID: 190 Comm: bash Not tainted 6.2.0-rc2-00320-g1f5abbd77e2c #19
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0xf8/0x108
show_stack+0x20/0x30
dump_stack_lvl+0x68/0x84
dump_stack+0x1c/0x38
panic+0x214/0x404
add_taint+0x0/0xf8
panic_bad_stack+0x144/0x160
handle_bad_stack+0x38/0x58
__bad_stack+0x78/0x7c
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
[...]
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
arm64_enter_el1_dbg.isra.0+0x14/0x20
el1_dbg+0x2c/0x90
el1h_64_sync_handler+0xcc/0xe8
el1h_64_sync+0x64/0x68
__rcu_irq_enter_check_tick+0x0/0x1b8
el1_interrupt+0x28/0x60
el1h_64_irq_handler+0x18/0x28
el1h_64_irq+0x64/0x68
__ftrace_set_clr_event_nolock+0x98/0x198
__ftrace_set_clr_event+0x58/0x80
system_enable_write+0x144/0x178
vfs_write+0x174/0x738
ksys_write+0xd0/0x188
__arm64_sys_write+0x4c/0x60
invoke_syscall+0x64/0x180
el0_svc_common.constprop.0+0x84/0x160
do_el0_svc+0x48/0xe8
el0_svc+0x34/0xd0
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x190/0x194
SMP: stopping secondary CPUs
Kernel Offset: 0x28da86000000 from 0xffff800008000000
PHYS_OFFSET: 0xfffff76600000000
CPU features: 0x00000,01a00100,0000421b
Memory Limit: none |
