| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Financial Transaction Manager (FTM) for RedHat OpenShift could allow a remote attacker to manipulate database queries due to improper neutralization of special elements in a boolean expression. |
| IBM Financial Transaction Manager (FTM) for RedHat OpenShift is vulnerable to missing authentication on the Business Rules Manager commands REST endpoint (`CommandsResource.java:31`). A local actor can invoke unauthenticated commands to cause resource exhaustionand halt business-rule management functions. |
| Uninitialized resource in Media in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to obtain cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| Missing authorization in Google Lens in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to obtain cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Observable discrepancy in Animation in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to potentially obtain cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Missing authorization in Permissions in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: use the adjusted address for the highmem page lookup
swiotlb_bounce() reads the page frame number from the slot's recorded
orig_addr, then advances orig_addr by tlb_offset to reach the address
the caller asked about. The highmem branch mixes the two: the offset
within the page comes from the adjusted address, the page from the value
before it.
Once the adjustment crosses a page boundary the pair no longer describes
one location, and the whole copy lands one page below the intended one
for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE
writes the device data over the wrong page and leaves the intended one
stale, DMA_TO_DEVICE feeds the device from a page the mapping may not
cover. Partial syncs through dma_sync_single_range_for_*() are what make
tlb_offset non-zero.
The branch test is picked the same way, so a slot recorded in lowmem can
be adjusted into highmem and the lowmem path then hands a highmem
address to phys_to_virt().
Take both from orig_addr once it is final and keep pfn in the branch
that uses it. PhysHighMem() asks the question straight from the address,
as dma-debug already does. |
| Improper resource exposure in Extensions in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to obtain cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| The User Private Files WordPress plugin before 2.1.9 does not validate that a supplied user belongs to the document being operated on before returning that user's email address, allowing any authenticated user, such as a Subscriber, to obtain the email address of any registered account, including administrators. |
| A flaw was found in m17n-lib. A partial failure during library initialization can leave an internal driver pointer uninitialized. Under specific error conditions, such as system resource exhaustion or database corruption, an application attempting to open an input method dereferences this null pointer without proper validation. This issue causes the application to crash, resulting in a Denial of Service (DoS). |
| With `[migrations] ALLOWED_DOMAINS` set to a matching entry such as `*` or a hostname wildcard, Gitea's migration URL validation could permit reserved and link-local addresses, such as `169.254.169.254`, even when `ALLOW_LOCALNETWORKS = false`. The local-network block list did not cover these ranges, and a hostname matching the allow list was accepted regardless of its resolved address. A user who can start migrations on such an instance could reach these addresses from the Gitea server; the default empty `ALLOWED_DOMAINS` configuration is not affected. |
| This vulnerability in Veeam Backup & Replication allows a Backup Viewer to modify the Enterprise Manager master key and stored antivirus update credentials. |
| With `[repository] FORCE_PRIVATE = true`, Gitea creates new repositories as private, but the post-receive hook still applied the `repo.private=false` push option to an empty repository created by push. Any user who can create repositories could make their new repository public in violation of the instance policy. The default configuration is not affected. |
| Unsigned integer underflow in wstrncat() in src/port.c in wolfSSL wolfSSH from v1.4.11 through v1.5.0 on non-Windows platforms allows an authenticated remote attacker to write one out-of-bounds null byte past the end of a stack buffer by sending a crafted SFTP path. wolfSSH_RealPath() in src/ssh.c appends each path component with a remaining-size bound (outSz - curSz) rather than the full destination size, so once the accumulated path reaches half the output buffer the size_t computation n - strlen(s1) - 1 wraps to near SIZE_MAX. The strncat() call is then effectively unbounded and copies the whole component; when that component exactly fills the remainder of the buffer, its terminating null is written one byte past the end. The caller's own length check keeps the copied data inside the buffer, so the overflow is limited to that single null byte, which may corrupt an adjacent stack value and crash the process. Applications that call the public wolfSSH_RealPath() with an output buffer smaller than the input path are additionally exposed to an unbounded copy, because the word32 expression outSz - segSz in that length check also wraps. |
| When password or public key authentication is used with the Windows port of wolfSSHd, the Windows logon token acquired for one authenticated connection is not released before a token is acquired for a subsequent connection, resulting in user login poisoning between connections. A less privileged user with a valid account on the server can exploit this to force a login as a more privileged user. The vulnerability was introduced with the initial Windows port of wolfSSHd in wolfSSH version 1.4.15 and affects all versions through 1.5.0. Non-Windows builds of wolfSSHd are not affected. |
| VMware Workstation and Fusion contain a stack-based buffer-overflow vulnerability in HGFS. A malicious actor with local administrative privileges on a virtual machine may exploit this issue to execute code as the virtual machine's VMX process running on the host.
Affected versions:
- VMware Workstation: 25H2, 26H1 (fixed in 26H1u1)
- VMware Fusion: 25H2, 26H1 (fixed in 26H1u1) |
| VMware Workstation and Fusion contain an integer-overflow vulnerability. A malicious actor with local administrative privileges on a virtual machine with VMXNET3 virtual network adapter may exploit this issue to execute code on the host.
Affected versions:
- VMware Workstation: 25H2, 26H1 (fixed in 26H1u1)
- VMware Fusion: 25H2, 26H1 (fixed in 26H1u1) |
| This vulnerability in Veeam Backup & Replication allows an authenticated Cloud Connect tenant to read arbitrary files on the service provider host. |
| wolfSSH does not validate that the ECDSA curve identifier in a KEXDH_REPLY host key blob matches the algorithm negotiated during key exchange. In ParseECCPubKey() (src/internal.c), the blob's algorithm string is used to derive the curve via NameToId/wcPrimeForId without checking against the negotiated ssh->handshake->pubKeyId, and the RFC 5656 curve identifier string is discarded via GetSkip() rather than compared. An active network man-in-the-middle attacker can substitute a host key blob containing a different ECDSA curve, causing the client to import the key on the wrong curve. Because the attacker controls the private key for the substituted curve, signature verification passes. Exploitation requires an active MitM position and a lax public key check callback (e.g., TOFU, algorithm-name-only check, or fingerprint match against the parsed key). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: use hlist_del_init_rcu for state_cache and state_cache_input
Commit 14acf9652e56 ("xfrm: defensively unhash xfrm_state lists in
__xfrm_state_delete") converted bydst/bysrc/byseq/byspi from
hlist_del_rcu() to hlist_del_init_rcu() so that a second
__xfrm_state_delete() on the same object becomes a no-op rather than a
write through LIST_POISON pprev. It missed state_cache and
state_cache_input, which kept hlist_del_rcu():
- hlist_del_rcu() leaves pprev = LIST_POISON2 (non-NULL), so
hlist_unhashed() returns false.
- hlist_del_init_rcu() leaves pprev = NULL, so hlist_unhashed()
returns true.
A second __xfrm_state_delete() therefore enters __hlist_del() on the
already-deleted state_cache/state_cache_input nodes and does
WRITE_ONCE(*pprev, next) through LIST_POISON2 — a write use-after-free
once the slab is reused. The corruption can in turn cause a subsequent
hlist_for_each_entry_rcu traversal to follow a dangling next pointer,
producing the read use-after-free reported in xfrm_input_state_lookup().
Switch state_cache and state_cache_input to hlist_del_init_rcu() to
match the other four lists, closing the write use-after-free and, with
it, the read use-after-free it spawns. |
