| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Prototype pollution vulnerability in 'deep-defaults' versions 1.0.0 through 1.0.5 allows attacker to cause a denial of service and may lead to remote code execution. |
| Prototype pollution vulnerability in 'set-or-get' version 1.0.0 through 1.2.10 allows an attacker to cause a denial of service and may lead to remote code execution. |
| Prototype pollution vulnerability in 'dotty' versions 0.0.1 through 0.1.0 allows attackers to cause a denial of service and may lead to remote code execution. |
| A file extension handling issue was found in [server] module of ONLYOFFICE DocumentServer v4.2.0.71-v5.6.0.21. The file extension is controlled by an attacker through the request data and leads to arbitrary file overwriting. Using this vulnerability, a remote attacker can obtain remote code execution on DocumentServer. |
| A heap buffer overflow vulnerability inside of BMP image processing was found at [core] module of ONLYOFFICE DocumentServer v4.0.0-9-v6.0.0. Using this vulnerability, an attacker is able to gain remote code executions on DocumentServer. |
| A file extension handling issue was found in [core] module of ONLYOFFICE DocumentServer v4.0.0-9-v5.6.3. An attacker must request the conversion of the crafted file from PPTT into PPTX format. Using the chain of two other bugs related to improper string handling, a remote attacker can obtain remote code execution on DocumentServer. |
| A file extension handling issue was found in [core] module of ONLYOFFICE DocumentServer v4.2.0.236-v5.6.4.13. An attacker must request the conversion of the crafted file from DOCT into DOCX format. Using the chain of two other bugs related to improper string handling, an attacker can achieve remote code execution on DocumentServer. |
| A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < 5.5.1), SCALANCE X201-3P IRT (All versions < 5.5.1), SCALANCE X201-3P IRT PRO (All versions < 5.5.1), SCALANCE X202-2 IRT (All versions < 5.5.1), SCALANCE X202-2P IRT (incl. SIPLUS NET variant) (All versions < 5.5.1), SCALANCE X202-2P IRT PRO (All versions < 5.5.1), SCALANCE X204 IRT (All versions < 5.5.1), SCALANCE X204 IRT PRO (All versions < 5.5.1), SCALANCE X204-2 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X204-2FM (All versions < V5.2.5), SCALANCE X204-2LD (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X204-2LD TS (All versions < V5.2.5), SCALANCE X204-2TS (All versions < V5.2.5), SCALANCE X206-1 (All versions < V5.2.5), SCALANCE X206-1LD (All versions < V5.2.5), SCALANCE X208 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X208PRO (All versions < V5.2.5), SCALANCE X212-2 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X212-2LD (All versions < V5.2.5), SCALANCE X216 (All versions < V5.2.5), SCALANCE X224 (All versions < V5.2.5), SCALANCE XF201-3P IRT (All versions < 5.5.1), SCALANCE XF202-2P IRT (All versions < 5.5.1), SCALANCE XF204 (All versions < V5.2.5), SCALANCE XF204 IRT (All versions < 5.5.1), SCALANCE XF204-2 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE XF204-2BA IRT (All versions < 5.5.1), SCALANCE XF206-1 (All versions < V5.2.5), SCALANCE XF208 (All versions < V5.2.5). Incorrect processing of POST requests in the web server may write out of bounds in stack. An attacker might leverage this to denial-of-service of the device or remote code execution. |
| A vulnerability has been identified in RUGGEDCOM RM1224 (All versions >= V4.3 and < V6.4), SCALANCE M-800 (All versions >= V4.3 and < V6.4), SCALANCE S615 (All versions >= V4.3 and < V6.4), SCALANCE SC-600 Family (All versions >= V2.0 and < V2.1.3), SCALANCE XB-200 (All versions < V4.1), SCALANCE XC-200 (All versions < V4.1), SCALANCE XF-200BA (All versions < V4.1), SCALANCE XM400 (All versions < V6.2), SCALANCE XP-200 (All versions < V4.1), SCALANCE XR-300WG (All versions < V4.1), SCALANCE XR500 (All versions < V6.2). Affected devices contain a stack-based buffer overflow vulnerability in the handling of STP BPDU frames that could allow a remote attacker to trigger a denial-of-service condition or potentially remote code execution. Successful exploitation requires the passive listening feature of the device to be active. |
| OpenCATS through 0.9.5-3 unsafely deserializes index.php?m=activity requests, leading to remote code execution. This occurs because lib/DataGrid.php calls unserialize for the parametersactivity:ActivityDataGrid parameter. The PHP object injection exploit chain can leverage an __destruct magic method in guzzlehttp. |
| In BIND 9.5.0 -> 9.11.29, 9.12.0 -> 9.16.13, and versions BIND 9.11.3-S1 -> 9.11.29-S1 and 9.16.8-S1 -> 9.16.13-S1 of BIND Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch, BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting values for the tkey-gssapi-keytab or tkey-gssapi-credential configuration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. For servers that meet these conditions, the ISC SPNEGO implementation is vulnerable to various attacks, depending on the CPU architecture for which BIND was built: For named binaries compiled for 64-bit platforms, this flaw can be used to trigger a buffer over-read, leading to a server crash. For named binaries compiled for 32-bit platforms, this flaw can be used to trigger a server crash due to a buffer overflow and possibly also to achieve remote code execution. We have determined that standard SPNEGO implementations are available in the MIT and Heimdal Kerberos libraries, which support a broad range of operating systems, rendering the ISC implementation unnecessary and obsolete. Therefore, to reduce the attack surface for BIND users, we will be removing the ISC SPNEGO implementation in the April releases of BIND 9.11 and 9.16 (it had already been dropped from BIND 9.17). We would not normally remove something from a stable ESV (Extended Support Version) of BIND, but since system libraries can replace the ISC SPNEGO implementation, we have made an exception in this case for reasons of stability and security. |
| A potential security vulnerability has been identified in the HPE Moonshot Provisioning Manager v1.20. The HPE Moonshot Provisioning Manager is an application that is installed in a VMWare or Microsoft Hyper-V environment that is used to setup and configure an HPE Moonshot 1500 chassis. This vulnerability could be remotely exploited by an unauthenticated user to cause a directory traversal in user supplied input to the `khuploadfile.cgi` CGI ELF. The directory traversal could lead to Remote Code Execution, Denial of Service, and/or compromise system integrity. **Note:** HPE recommends that customers discontinue the use of the HPE Moonshot Provisioning Manager. The HPE Moonshot Provisioning Manager application is discontinued, no longer supported, is not available to download from the HPE Support Center, and no patch is available. |
| A potential security vulnerability has been identified in the HPE Moonshot Provisioning Manager v1.20. The HPE Moonshot Provisioning Manager is an application that is installed in a VMWare or Microsoft Hyper-V environment that is used to setup and configure an HPE Moonshot 1500 chassis. This vulnerability could be remotely exploited by an unauthenticated user to cause a stack based buffer overflow using user supplied input to the `khuploadfile.cgi` CGI ELF. The stack based buffer overflow could lead to Remote Code Execution, Denial of Service, and/or compromise system integrity. **Note:** HPE recommends that customers discontinue the use of the HPE Moonshot Provisioning Manager. The HPE Moonshot Provisioning Manager application is discontinued, no longer supported, is not available to download from the HPE Support Center, and no patch is available. |
| The All in One SEO WordPress plugin before 4.1.5.3 is affected by a Privilege Escalation issue, which was discovered during an internal audit by the Jetpack Scan team, and may grant bad actors access to protected REST API endpoints they shouldn’t have access to. This could ultimately enable users with low-privileged accounts, like subscribers, to perform remote code execution on affected sites. |
| The Formidable Form Builder WordPress plugin before 4.09.05 allows to inject certain HTML Tags like <audio>,<video>,<img>,<a> and<button>.This could allow an unauthenticated, remote attacker to exploit a HTML-injection byinjecting a malicous link. The HTML-injection may trick authenticated users to follow the link. If the Link gets clicked, Javascript code can be executed. The vulnerability is due to insufficient sanitization of the "data-frmverify" tag for links in the web-based entry inspection page of affected systems. A successful exploitation incomibantion with CSRF could allow the attacker to perform arbitrary actions on an affected system with the privileges of the user. These actions include stealing the users account by changing their password or allowing attackers to submit their own code through an authenticated user resulting in Remote Code Execution. If an authenticated user who is able to edit Wordpress PHP Code in any kind, clicks the malicious link, PHP code can be edited. |
| The Include Me WordPress plugin through 1.2.1 is vulnerable to path traversal / local file inclusion, which can lead to Remote Code Execution (RCE) of the system due to log poisoning and therefore potentially a full compromise of the underlying structure |
| The Autoptimize WordPress plugin before 2.7.8 attempts to delete malicious files (such as .php) form the uploaded archive via the "Import Settings" feature, after its extraction. However, the extracted folders are not checked and it is possible to upload a zip which contained a directory with PHP file in it and then it is not removed from the disk. It is a bypass of CVE-2020-24948 which allows sending a PHP file via the "Import Settings" functionality to achieve Remote Code Execution. |
| The Fancy Product Designer WordPress plugin before 4.6.9 allows unauthenticated attackers to upload arbitrary files, resulting in remote code execution. |
| The Business Hours Pro WordPress plugin through 5.5.0 allows a remote attacker to upload arbitrary files using its manual update functionality, leading to an unauthenticated remote code execution vulnerability. |
| The run_action function of the Facebook for WordPress plugin before 3.0.0 deserializes user supplied data making it possible for PHP objects to be supplied creating an Object Injection vulnerability. There was also a useable magic method in the plugin that could be used to achieve remote code execution. |
