| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: add missing device refcount for CAN filter removal
sashiko-bot remarked a problem with a concurrent device unregistration
in isotp.c which also is present in the bcm.c code. A former fix for raw.c
commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix")
introduced a netdevice_tracker which solves the issue for bcm.c too.
bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on
dev_get_by_index(ifindex) to re-find the device for an rx_op before
unregistering its filter. If a concurrent NETDEV_UNREGISTER has already
unlisted the device from the ifindex table, that lookup fails and
can_rx_unregister() is silently skipped, leaving a stale CAN filter
pointing at the soon-to-be-freed bcm_op/socket.
Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev
from the moment the rx filter is registered in bcm_rx_setup() until it
is unregistered in bcm_rx_unreg(), and use that reference directly in
bcm_release() and bcm_delete_rx_op() instead of re-looking the device
up by ifindex. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: unregister blocking notifier on init failure
sparx5_register_notifier_blocks() registers the switchdev blocking
notifier before allocating the ordered workqueue. If the workqueue
allocation fails, the error path unregisters the switchdev and netdevice
notifiers, but leaves the blocking notifier registered.
Add a separate error label for the workqueue allocation failure path and
unregister the switchdev blocking notifier there. |
| In the Linux kernel, the following vulnerability has been resolved:
dm era: fix out-of-bounds memory access for non-zero start sector
dm-era tracks writes in target-relative blocks, but era_map() calculates
the writeset block before applying the target offset. Tables with a
non-zero start sector can therefore pass an absolute mapped-device block
to metadata_current_marked().
If the absolute block is beyond the current writeset size,
writeset_marked() tests past the end of the in-core bitset. KASAN reports
this as a vmalloc-out-of-bounds access.
Apply the target offset before calculating the era block so writeset
lookups use the target-relative block number. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-ioctl: fix a possible overflow in list_version_get_info
sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the
output buffer - info->vers->version[0], info->vers->version[1],
info->vers->version[2] and info->vers->next. This can cause buffer
overflow.
Fix this buffer overflow by replacing "sizeof(tt->version)" with
"sizeof(struct dm_target_versions)". |
| In the Linux kernel, the following vulnerability has been resolved:
dm-log: fix a bitset_size overflow on 32bit machines
Commit c20e36b7631d ("dm log: fix out-of-bounds write due to
region_count overflow") made sure that region_count could fit in an
unsigned int. But the bitmap memory isn't allocated based on
region_count. It uses bitset_size (a size_t variable). The first step of
calculating bitset_size is to set it to region_count, rounded up to a
multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG
smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit
architecture, this will make bitset_size wrap around to 0 and fail,
despite region_count being valid.
Since bitset_size gets divided by 8, it can hold any valid region_count.
It just needs a special case to handle the rollover. If it is 0, the
value rolled over, and bitset size should be set to the number of bytes
needed to hold 2^32 bits. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: reject option groups without values
The pcache target parses optional arguments as name/value pairs. A
table that advertises one optional argument and supplies only a
recognized option name, for example "cache_mode", reaches
parse_cache_opts() with argc == 1. The parser consumes the name,
decrements argc to zero, then calls dm_shift_arg() again for the value.
dm_shift_arg() returns NULL when no arguments remain, and the following
strcmp() dereferences that NULL pointer.
Check that each recognized option has a value before consuming it. This
keeps valid "cache_mode writeback" and "data_crc true/false" tables
unchanged while making malformed tables fail during target construction
with a precise missing-value error. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: avoid leaking the caller's thread keyring via the table device file
The refactoring in commit a28d893eb327 ("md: port block device access to file")
accidentally causes the caller's thread keyring to be kept alive long
beyond the caller's lifetime.
As a result, "cryptsetup luksSuspend" silently fails to wipe the
LUKS volume key from memory.
In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread
keyring to pass the volume key to the kernel. dm-crypt's
crypt_set_keyring_key() copies the key material into its own
crypt_config structure and then drops its own reference to the key in
the keyring with key_put().
With this fix, restoring pre-v6.9 behavior, the copy in the thread
keyring is then promptly garbage collected, such that exactly one copy
of the volume key remains. This single copy is correctly wiped from
memory on "cryptsetup luksSuspend".
Without this fix, the thread keyring and the volume key in it remains.
This second copy is only freed on "luksClose". "luksSuspend" neither
knows about this copy nor has any way to remove it, so the key remains
recoverable from RAM after a suspend that is documented to have wiped it.
This fix should not introduce new security problems, as the code is
anyway gated by CAP_SYS_ADMIN. The device-mapper core, not the calling
task, is the legitimate owner of this long-lived file. |
| In the Linux kernel, the following vulnerability has been resolved:
dm_early_create: fix freeing used table on dm_resume failure
If dm_resume fails, the kernel attempts to free table with
dm_table_destroy, but the table was already instantiated with
dm_swap_table. This commit skips the call to dm_table_destroy in this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix leaking uninitialized kernel memory
If hash size is less than device's tuple size, dm-integrity is supposed
to zero the remaining space. There was a bug in the code that zeroing
didn't work. This commit fixes it. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: don't increment hash_offset twice
hash_offset is already incremented in the loop "for (i = 0; i < to_copy;
i++, ts--)". Do not increment it again. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: make error counter atomic
The error counter "v->corrupted_errs" was not atomic, thus it could be
subject to race conditions. The call to
dm_audit_log_target("max-corrupted-errors") may be skipped due to the
races. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-fence: Make dma_fence_dedup_array() robust against 0-count input
dma_fence_dedup_array() returns 1 when called with num_fences == 0:
the for-loop body never executes, j stays at 0, and the final
`return ++j` yields 1. This contradicts both the kernel-doc ("Return:
Number of unique fences remaining in the array") and the natural
expectation that 0 input gives 0 output.
The caller __dma_fence_unwrap_merge() bails out via the
`if (count == 0 || count == 1)` fast path and so is save.
But amdgpu_userq_wait_*() could reach the dedup call with a zero local
count and dereference an uninitialized fence slot in the array.
Make the contract match the documentation by returning 0 early. This
also skips an unnecessary sort() call on an empty array. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: dma-fence: Fix potential NULL pointer dereference
The commit mentioned in the fixes tag below introduced a mechanism
through which fence producers can fully decouple from fence consumers.
This, desirable, mechanism is based on the fence's signaled-bit as the
"decoupling point".
A sophisticated interaction between RCU and atomic instructions attempts
to ensure that fence consumers can still interact with fence producers
through the dma_fence_ops (callback pointers into the producer).
This is the desired behavior: to check for decoupling, the signaled-bit
is first checked. If it's not yet signaled, RCU ensures that the ops
pointer cannot yet be NULL.
Hereby, dma_fence_signal_timestamp_locked() first sets the signaled-bit,
and then sets the ops pointer to NULL. Readers first load the ops
pointer, and then check through the signaled-bit whether the pointer can
legally be accessed.
These set and load operations could occur out of order on weakly ordered
platforms. This problem can be solved very elegantly by using the ops
pointer itself as the synchronization point. The pointer is either NULL,
or cannot become NULL while it is being used thanks to RCU.
Replace the signaled-bit check in dma_fence_timeline_name() and
dma_fence_driver_name(). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix use-after-free in amdxdna_gem_dmabuf_mmap()
When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma)
which internally calls drm_gem_vm_close() → drm_gem_object_put(),
releasing the GEM object reference acquired at the start of the function.
However, the close_vma label then falls through to put_obj, which calls
drm_gem_object_put() a second time on the same object.
If the first put releases the last reference, the object is freed and the
second put accesses freed memory, causing a use-after-free.
Fix by returning directly from close_vma instead of falling through to
put_obj, since the close handler already performs all necessary cleanup
including the object put. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Use caller client for debug BO sync
amdxdna_drm_sync_bo_ioctl() looks up args->handle in the ioctl caller's
drm_file. For SYNC_DIRECT_FROM_DEVICE, it then calls
amdxdna_hwctx_sync_debug_bo(), but passes abo->client.
amdxdna_hwctx_sync_debug_bo() uses the passed client both as the handle
namespace for debug_bo_hdl and as the owner of the hardware context xarray.
Those must match the file that supplied args->handle. The BO's stored
client pointer is object state, not the ioctl context.
Pass filp->driver_priv instead, matching the original handle lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path
If phys_disk->in_reset is set, the function returns directly without
undoing the resources acquired for the command. Add the missing error
cleanup by unmapping the IOACCEL2 SG chain block when needed, unmapping
the SCSI command, and dropping the outstanding IOACCEL command count
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup()
The memory allocated for mboxq using mempool_alloc() is not freed in
some of the early exit error paths. Fix that by moving the
mempool_free() call to an earlier point after last use. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Free unsubmitted command instead of double-putting it
scsiback_get_pend_req() obtains a command tag and returns a vscsibk_pend
whose embedded se_cmd has only been memset to 0, so its cmd_kref is 0;
the se_cmd is initialised (kref_init() via target_init_cmd()) only
later, in scsiback_cmd_exec(), on the successful VSCSIIF_ACT_SCSI_CDB
path. The two error paths in scsiback_do_cmd_fn() taken before the
command is submitted -- a failed scsiback_gnttab_data_map() and an
unknown ring_req.act -- call
transport_generic_free_cmd(&pending_req->se_cmd, 0), which kref_put()s a
refcount of 0. That underflows it ("refcount_t: underflow;
use-after-free") and, as the release function is not run, leaks the
command tag.
Impact: a pvSCSI guest can leak every command tag of a LUN's session,
stopping the LUN, by submitting requests with a bad grant reference or
an unknown request type; under panic_on_warn the refcount underflow
panics the host.
Add a helper that just returns the tag with target_free_tag() and sends
the error response. It frees the tag while the v2p reference still pins
the session, and snapshots the response fields beforehand because
freeing the tag can let another ring reuse the pending_req slot. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE
core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT
parameter list with transport_kmap_data_sg() and parses the destination
TransportID with target_parse_pr_out_transport_id(). For an iSCSI
TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns
the ISID in iport_ptr as a raw pointer into that mapped buffer.
The function then unmaps the buffer with transport_kunmap_data_sg() before
dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and
core_scsi3_alloc_registration(). When the parameter list spans more than
one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses
vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual
address backing iport_ptr is torn down and every subsequent dereference is
a use-after-free read of the unmapped region.
Keep the parameter list mapped until iport_ptr is no longer needed: drop
the early transport_kunmap_data_sg() and unmap once on the success path,
right before returning. The error paths already unmap through the existing
"if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs
on every post-map error exit because buf is no longer cleared early. Only
reads of the mapping happen while spinlocks are held; the map and unmap
calls remain outside any lock. The sibling caller
core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it
and is left unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix refcount leak in efct_hw_io_abort()
When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path
returns -ENOSPC without releasing the reference obtained via
kref_get_unless_zero() earlier in the function. All other error paths
correctly drop the reference. This causes a permanent reference leak on the
io_to_abort object.
Additionally, the abort_in_progress flag is left set to true on this path,
which means future abort attempts for the same I/O will immediately return
-EINPROGRESS even though the abort was never submitted, effectively
blocking recovery.
Fix this by adding the missing kref_put() call and reset abort_in_progress
to false, matching the cleanup done in the efct_hw_wq_write() failure path
below. |
