| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Denial-of-service in the Graphics: ImageLib component. This vulnerability was fixed in Firefox 152, Firefox ESR 140.12, Firefox ESR 115.37, Thunderbird 152, and Thunderbird 140.12. |
| sppp_pap_input in sys/net/if_spppsubr.c in OpenBSD before 076e2b1 allows authentication bypass via certain zero values for lengths. |
| A guest can trigger an infinite loop in the hda audio driver. |
| Nextcloud Server is an open source personal cloud server. Prior to versions 23.0.10 and 24.0.5, calendar name lengths are not validated before writing to a database. As a result, an attacker can send unnecessary amounts of data against the database. Version 23.0.10 and 24.0.5 contain patches for the issue. No known workarounds are available. |
| phpCAS is an authentication library that allows PHP applications to easily authenticate users via a Central Authentication Service (CAS) server. The phpCAS library uses HTTP headers to determine the service URL used to validate tickets. This allows an attacker to control the host header and use a valid ticket granted for any authorized service in the same SSO realm (CAS server) to authenticate to the service protected by phpCAS. Depending on the settings of the CAS server service registry in worst case this may be any other service URL (if the allowed URLs are configured to "^(https)://.*") or may be strictly limited to known and authorized services in the same SSO federation if proper URL service validation is applied. This vulnerability may allow an attacker to gain access to a victim's account on a vulnerable CASified service without victim's knowledge, when the victim visits attacker's website while being logged in to the same CAS server. phpCAS 1.6.0 is a major version upgrade that starts enforcing service URL discovery validation, because there is unfortunately no 100% safe default config to use in PHP. Starting this version, it is required to pass in an additional service base URL argument when constructing the client class. For more information, please refer to the upgrading doc. This vulnerability only impacts the CAS client that the phpCAS library protects against. The problematic service URL discovery behavior in phpCAS < 1.6.0 will only be disabled, and thus you are not impacted from it, if the phpCAS configuration has the following setup: 1. `phpCAS::setUrl()` is called (a reminder that you have to pass in the full URL of the current page, rather than your service base URL), and 2. `phpCAS::setCallbackURL()` is called, only when the proxy mode is enabled. 3. If your PHP's HTTP header input `X-Forwarded-Host`, `X-Forwarded-Server`, `Host`, `X-Forwarded-Proto`, `X-Forwarded-Protocol` is sanitized before reaching PHP (by a reverse proxy, for example), you will not be impacted by this vulnerability either. If your CAS server service registry is configured to only allow known and trusted service URLs the severity of the vulnerability is reduced substantially in its severity since an attacker must be in control of another authorized service. Otherwise, you should upgrade the library to get the safe service discovery behavior. |
| conduit-hyper integrates a conduit application with the hyper server. Prior to version 0.4.2, `conduit-hyper` did not check any limit on a request's length before calling [`hyper::body::to_bytes`](https://docs.rs/hyper/latest/hyper/body/fn.to_bytes.html). An attacker could send a malicious request with an abnormally large `Content-Length`, which could lead to a panic if memory allocation failed for that request. In version 0.4.2, `conduit-hyper` sets an internal limit of 128 MiB per request, otherwise returning status 400 ("Bad Request"). This crate is part of the implementation of Rust's [crates.io](https://crates.io/), but that service is not affected due to its existing cloud infrastructure, which already drops such malicious requests. Even with the new limit in place, `conduit-hyper` is not recommended for production use, nor to directly serve the public Internet. |
| Flux is an open and extensible continuous delivery solution for Kubernetes. Versions prior to 0.35.0 are subject to a Denial of Service. Users that have permissions to change Flux’s objects, either through a Flux source or directly within a cluster, can provide invalid data to fields `.spec.interval` or `.spec.timeout` (and structured variations of these fields), causing the entire object type to stop being processed. This issue is patched in version 0.35.0. As a workaround, Admission controllers can be employed to restrict the values that can be used for fields `.spec.interval` and `.spec.timeout`, however upgrading to the latest versions is still the recommended mitigation. |
| A stack-based buffer overflow vulnerability exists in both the LLMNR functionality of Sealevel Systems, Inc. SeaConnect 370W v1.3.34. A specially-crafted network packet can lead to remote code execution. An attacker can send a malicious packet to trigger this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp
Patch series "mm/damon/core: validate damos_quota_goal->nid".
node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The
node id is used for si_meminfo_node() and NODE_DATA() without proper
validation. As a result, privileged users can trigger an out of bounds
memory access using DAMON_SYSFS. Fix the issues.
The issue was originally reported [1] with a fix by another author. The
original author announced [2] that they will stop working including the
fix that was still in the review stage. Hence I'm restarting this.
This patch (of 2):
Users can set damos_quota_goal->nid with arbitrary value for
node_mem_{used,free}_bp. But DAMON core is using those for
si_meminfo_node() without the validation of the value. This can result in
out of bounds memory access. The issue can actually triggered using DAMON
user-space tool (damo), like below.
$ sudo ./damo start --damos_action stat \
--damos_quota_goal node_mem_used_bp 50% -1 \
--damos_quota_interval 1s
$ sudo dmesg
[...]
[ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
Fix this issue by adding the validation of the given node. If an invalid
node id is given, it returns 0% for used memory ratio, and 100% for free
memory ratio. |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: reject inodes with zero i_nlink and valid mode in ext2_iget()
ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is
zero or i_dtime is set, treating them as deleted. However, the case of
i_nlink == 0 with a non-zero mode and zero dtime slips through. Since
ext2 has no orphan list, such a combination can only result from
filesystem corruption - a legitimate inode deletion always sets either
i_dtime or clears i_mode before freeing the inode.
A crafted image can exploit this gap to present such an inode to the
VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via
ext2_unlink(), ext2_rename() and ext2_rmdir():
WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295
vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477
do_unlinkat+0x53e/0x730 fs/namei.c:4541
__x64_sys_unlink+0xc6/0x110 fs/namei.c:4587
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_rename+0x35e/0x850 fs/ext2/namei.c:374
vfs_rename+0xf2f/0x2060 fs/namei.c:5021
do_renameat2+0xbe2/0xd50 fs/namei.c:5178
__x64_sys_rename+0x7e/0xa0 fs/namei.c:5223
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311
vfs_rmdir+0x204/0x690 fs/namei.c:4348
do_rmdir+0x372/0x3e0 fs/namei.c:4407
__x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Extend the existing i_nlink == 0 check to also catch this case,
reporting the corruption via ext2_error() and returning -EFSCORRUPTED.
This rejects the inode at load time and prevents it from reaching any
of the namei.c paths.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| Unauthenticated Broken Authentication in Upsell Order Bump Offer for WooCommerce <= 3.1.4 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmasm: fix OOB reads in command_file_write due to missing size checks
The command_file_write() handler allocates a kernel buffer of exactly
count bytes and copies user data into it, but does not validate the
buffer against the dot command protocol before passing it to
get_dot_command_size() and get_dot_command_timeout().
Since both the allocation size (count) and the header fields (command_size,
data_size) are independently user-controlled, an attacker can cause
get_dot_command_size() to return a value exceeding the allocation,
triggering OOB reads in get_dot_command_timeout() and an out-of-bounds
memcpy_toio() that leaks kernel heap memory to the service processor.
Fix with two guards: reject writes smaller than sizeof(struct
dot_command_header) before allocation, then after copying user data
reject commands where the buffer is smaller than the total size declared
by the header (sizeof(header) + command_size + data_size). This ensures
all subsequent header and payload field accesses stay within the buffer. |
| A denial-of-service vulnerability exists in the WebSocket API due to insufficient validation and handling of JSON-based requests. A low-privileged authenticated attacker can send a specially crafted request that causes service disruption and may result in an unexpected device reboot. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: Validate SQE128 flag before accessing the cmd
ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before
IO_URING_F_SQE128 flag check. This could cause out of boundary memory
access.
Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return
-EINVAL immediately if the flag is not set. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Add validation for MTU changes
Increasing the MTU beyond the HDS threshold causes the hardware to
fragment packets across multiple buffers. If a single-buffer XDP program
is attached, the driver will drop all multi-frag frames. While we can't
prevent a remote sender from sending non-TCP packets larger than the MTU,
this will prevent users from inadvertently breaking new TCP streams.
Traditionally, drivers supported XDP with MTU less than 4Kb
(packet per page). Fbnic currently prevents attaching XDP when MTU is too high.
But it does not prevent increasing MTU after XDP is attached. |
| Improper validation of syntactic correctness of input in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network. |
| User interface (ui) misrepresentation of critical information in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network. |
| guzzlehttp/psr7 is a PSR-7 HTTP message library implementation in PHP. Versions prior to 2.10.2 contain improper Host header validation when parsing raw HTTP request messages and when deriving a server request URI from server variables. An attacker can provide a malformed Host header containing URI authority delimiters, such as `[email protected]`. When the Host value is used to construct a URI, the malformed value can be reinterpreted as URI userinfo and host. This can cause the PSR-7 request URI host to differ from the original Host header value. Applications are affected if they parse attacker-controlled raw HTTP requests with `GuzzleHttp\Psr7\Message::parseRequest()` or the legacy 1.x `GuzzleHttp\Psr7\parse_request()` function, or if they build server requests from attacker-controlled server variables, then rely on the resulting URI host for routing, allow-list checks, or forwarding decisions. In affected forwarding or gateway scenarios, this may cause requests or credentials to be sent to an unintended host. The issue is patched in `2.10.2`. `1.x` is end-of-life and will not receive a patch. Some workarounds are available. Validate the `Host` header as `uri-host [ ":" port ]` before calling `Message::parseRequest()` or legacy `parse_request()` on untrusted HTTP request data, or before deriving routing and forwarding decisions from a parsed request URI. Reject Host values containing userinfo, path, query, or fragment delimiters. |
| The Aqara Cloud OAuth Authorization Endpoint (open-cn.aqara.com/oauth/authorize) is vulnerable to a redirect bypass due to lax controls on domain matching, which is an instance of "CWE-1289: Improper Validation of Unsafe Equivalence in Input" and has an estimated CVSS of CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:N (9.3 Critical). |
| The SSH service of CelloOS developed by Cellopoint has an Improper Access Control vulnerability, allowing authenticated remote attackers to bypass the enforced command restrictions and execute operating system commands outside the originally authorized scope. |
