| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory
__xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime PM
reference. Shrinking a bo outside system memory invalidates its GPU
mappings, which needs the device resumed, so while it is runtime
suspended the page table zap trips an assert and the TLB invalidation
returns -ENODEV:
WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at xe_bo_move_notify+0x1fc/0x450 [xe]
xe_bo_shrink+0x20f/0x2b0 [xe]
__xe_shrinker_walk+0x174/0x410 [xe]
xe_shrinker_scan+0x10c/0x1e0 [xe]
do_shrink_slab+0x176/0x7e0
drop_caches_sysctl_handler+0x9c/0xf0
Take a reference before walking a memory type other than XE_PL_SYSTEM
and stop there if it cannot be acquired. Reuse the shrinker's existing
acquire path, which resumes the device directly where reclaim allows
that and otherwise queues the PM worker for a later scan. Stop the walk
once the scan target is met, so a satisfied scan does not wake the
device. System memory is still reclaimed while the device is suspended.
Gate this on xe_device_is_l2_flush_optimized(), the same condition under
which xe_bo_trigger_rebind() issues the invalidation for a non-fault-mode
vm, so reclaim is unaffected elsewhere. The System CCS copy already has
its own reference in xe_bo_shrink().
Only a non-fault-mode vm can reach this, since a fault-mode vm requires
LR mode and that holds a runtime PM reference for the vm's lifetime.
Reproduced with igt@xe_madvise@dontneed-before-exec while the GPU is
runtime suspended.
v2: simplify needs_rpm check. (Matt)
retarget Fixes tag since the issue occurs with the non-fault-mode
path added by 4e7ebff69aed.
v3: handle this in xe_shrinker.c instead of xe_bo.c (Thomas)
v4: stop the walk once the scan target is met. (Sashiko)
v5: rebase on the freed page accounting fix. (Sashiko)
v6: reuse the shrinker acquire path so runtime pm can be resumed
directly instead of always queueing a worker. (Thomas)
v7: replace xe_pm_runtime_put() with xe_shrinker_runtime_pm_put(). (Thomas)
(cherry picked from commit 628f92b28bf4c371c10207daf6fc4caee0c0db2e) |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate absolute native symlink targets before NT fixups
With symlinkroot unset, an absolute target is copied without conversion
to an NT drive path. Later code still assumes an NT prefix is present
when modifying the target and calculating the print name length.
For "/ab", this causes two failures: sym[5] and path[5] are written
past their allocations, and plen -= 2 * poff subtracts an assumed
8-byte prefix from a 6-byte UTF-16 target, wrapping u16 plen to 65534.
That underflow causes another overflow: memcpy() copies 65534 bytes
into a 24-byte buffer. A user with write access to a mounted share
can trigger these bugs with default settings.
Validate the NT drive prefix, including an ASCII drive letter, before
accessing fixed offsets or subtracting the prefix length. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr
When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not
set, a drm_pending_vblank_event will be allocated. If later, there is an
allocation failure or another failure at setup_out_fence(), that event
will not have base.fence set and it will not be released at
complete_signaling().
Release the event and set crtc_state->event to NULL just like in the
DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at
drm_event_reserve_init(). That is, prepare_signaling() releases the
event and there is nothing to be done at complete_signaling(). Use
drm_event_cancel_free() as that will also undo drm_event_reserve_init()
in case it has been called. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_nat: fully initialise new_addr in netmap setup
nft_nat_setup_netmap() builds the mapped address in an on-stack
union nf_inet_addr. For an IPv4 mapping it writes only the 4-byte .ip
member and the loop runs a single 32-bit iteration, but it then copies
the whole 16-byte union into range->min_addr and range->max_addr, so the
upper 12 bytes reach nf_nat_setup_info() uninitialised.
KMSAN reports an uninit-value in nf_nat_setup_info() reached from
nft_nat_eval(). The IPv6 path fills all 16 bytes and is not affected.
Zero-initialise new_addr. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: pxa: fix double counting of the hw descriptors
pxad_alloc_desc() was converted from
kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT)
to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc
itself - but only where the compiler has __builtin_counted_by_ref(), so
from gcc 15.1 or clang 22.1 on. The loop below it still increments
nb_desc, which makes it come out doubled there and correct elsewhere.
nb_desc is what pxad_free_desc() iterates over and what
set_updater_desc() indexes from, so set it explicitly and drop the
increment. The error path has to lower it to the number of descriptors
allocated so far, otherwise pxad_free_desc() would free entries that were
never allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't offload TC setup on AP_VLAN interfaces
AP_VLAN interfaces are purely virtual, so don't try to offload
TC setup to drivers. We can't really use the AP interface either
since we may not know it all the time, and it could technically
even change.
Just reject the TC offload so things get done in software. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()
When dma_device_put() drops the last reference on chan->device->ref,
dma_device_release() runs and may free the dma_device along with its
channels.
dma_chan_put() then still reads chan->device->owner via
dma_chan_to_owner() for the trailing module_put(). KASAN catches it:
slab-use-after-free in dma_chan_put+0x3e6/0x4c0
Read of size 8 by task insmod/6319
Freed by task 6319:
kfree+0x225/0x470
dma_chan_put+0x395/0x4c0
dmaengine_put+0xf8/0x160
Cache the module owner in dma_chan_put() before the put so the trailing
module_put() does not need chan->device. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: Fix device kref underflow in dma_chan_put()
dma_chan_get() takes chan->device->ref only on the slow path:
/* no kref on fast path */
if (chan->client_count) {
__module_get(owner);
chan->client_count++;
return 0;
}
if (!try_module_get(owner))
return -ENODEV;
if (!dma_device_get(chan->device)) { // calls kref_get_unless_zero()
dma_chan_put() drops the ref unconditionally, so every fast-path
get/put pair drops one extra device reference.
The bug fires when two conditions hold together: a non-private
provider has a persistent client holding chan->client_count > 0
and another client cycles dmaengine_get()/dmaengine_put().
When the kref hits zero, the subsequent dma_find_channel() returns
NULL even though the provider module is still loaded.
Fix this by dropping device->ref only on the last put, matching the
single slow-path get. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted
The client borrows shared CQ credits in the ADDR_RESOLVED handler via
ib_cq_pool_get(), before the peer is connected. create_cm() can return
-ERESTARTSYS from wait_event_interruptible_timeout() without destroying
the CM ID. The init_conns() and stop-and-destroy paths then call
destroy_con_cq_qp() while cq is still NULL (no PUT) and only afterwards
rdma_destroy_id().
CMA serializes the handler against rdma_destroy_id() with handler_mutex,
but that does not order the GET against destroy_con_cq_qp(). If
ADDR_RESOLVED has already passed the DESTROYING check, it can take
con_mutex, GET credits, and then lose the con to kfree. Device
unregister later hits WARN_ON(cq->cqe_used) in ib_cq_pool_cleanup().
Set a per-connection flag under con_mutex before CQ/QP teardown so a
racing ADDR_RESOLVED cannot borrow credits after teardown has begun. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/iser: reject a remote invalidation of an unregistered direction
A write command whose data is sent entirely as immediate data is not
registered. iser_reg_mem_fastreg() takes the DMA key path and leaves
rdma_reg[ISER_DIR_OUT].desc at NULL, while iser_dma_map_task_data() has
already set dir[ISER_DIR_OUT].
iser_check_remote_inv() looks at dir[] alone and hands the descriptor to
iser_inv_desc(), which reads desc->sig_protected. A target that answers
such a command with IB_WR_SEND_WITH_INV faults the initiator.
Leaving those commands unregistered is deliberate.
The same function already terminates the connection when a target sends
a remote invalidation the initiator did not ask for. A target that
invalidates a direction that was never registered is in the same class,
so give it the same answer.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 0 UID: 0 PID: 40 Comm: kworker/u8:2 Not tainted 7.2.0-rc5-ISERHOST-gf5098b6bae76-dirty #3 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: rxe_wq do_work
RIP: 0010:iser_task_rsp+0x6d6/0xec0
Code: 48 c1 ea 03 80 3c 02 00 0f 85 ba 06 00 00 48 8b 9b 78 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 20 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 76 06 00 00 80 7b 20 00 0f 84 3d 04
RSP: 0018:ffff88811b008db8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000001848
RDX: 0000000000000004 RSI: 1ffff11021587b12 RDI: 0000000000000020
RBP: ffff88810adc1ae4 R08: ffff888109b7f860 R09: ffffffff90a922c0
R10: ffff88810adc1a1c R11: 000000000000003c R12: ffff888109b7f800
R13: ffff88810adc1acc R14: ffff888109b7f820 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88818a676000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005afe2b CR3: 000000010af23005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<IRQ>
__ib_process_cq+0xe1/0x390
ib_poll_handler+0x6e/0x200
irq_poll_softirq+0x1df/0x480
? clockevents_program_event+0x2ba/0x860
? __pfx_irq_poll_softirq+0x10/0x10
handle_softirqs+0x18e/0x590
? __pfx_handle_softirqs+0x10/0x10
? __hrtimer_rearm_deferred+0x156/0x450
do_softirq+0x3b/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x61/0x70
__alloc_skb+0x732/0x890
? _raw_spin_lock_irqsave+0x85/0xe0
? __pfx___alloc_skb+0x10/0x10
? _raw_read_unlock_irqrestore+0x16/0x50
rxe_init_packet+0x16b/0x4f0
prepare_ack_packet+0xb8/0x830
rxe_receiver+0x499/0x9980
? __pfx_rxe_receiver+0x10/0x10
? rxe_completer+0x29e5/0x38c0
? hrtimer_start_range_ns_common+0x75f/0x1730
? hrtimer_start_range_ns+0xa6/0x2c0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx_rxe_receiver+0x10/0x10
do_work+0x144/0x470
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Restore HMM_PFN_WRITE check in ODP write paths
Commit 0b261d7c1cd3 ("RDMA/rxe: Break endless pagefault loop for RO
pages") dropped the access permission test from rxe_check_pagefault()
and left only HMM_PFN_VALID. A page faulted in read-only, for example
a page-cache folio behind a PROT_READ file mapping, then satisfies the
check and ODP write operations (RDMA WRITE, RDMA READ response, SEND
payload, atomics) modify it through kmap without ever breaking CoW.
An unprivileged user can register an ODP MR over such a mapping and
have incoming RDMA traffic overwrite the page cache of a file it only
holds O_RDONLY, including /etc/passwd or setuid binaries. This is the
same primitive class as Dirty COW and CVE-2022-2590.
mlx5 has the missing invariant: its ODP path sets the device write bit
only for pfns that carry HMM_PFN_WRITE. Restore it in rxe by requiring
HMM_PFN_WRITE in rxe_check_pagefault() for every operation except
RXE_PAGEFAULT_RDONLY. A write to a non-writable VMA now fails the one
fault attempt with -EPERM from hmm_vma_fault() instead of re-faulting
forever. For a writable VMA the fault breaks CoW and the write lands
in the private page.
Keep pmem flushes on the read-only check. arch_wb_cache_pmem() never
modifies memory, and the FLUSH access bits do not make the umem
writable, so classifying flushes as writes would make every flush
against a flush-only MR fail. |
| When a private repository is transferred to a user who lacks access, Gitea grants that recipient temporary read access as a collaborator so they can review the repository. Rejecting or cancelling the transfer did not revoke this collaboration, so the named recipient kept persistent read access to the private repository, including its code, issues, pull requests and wiki, and could clone it. The repository owner was not notified. Transfer-granted access is now removed while collaborations that existed before the transfer are preserved. |
| Gitea expanded a workflow's static `strategy.matrix` into its full Cartesian product without a size limit when creating a run, before the fork pull request approval gate applied. A user who can open a pull request from a fork could submit a small workflow file whose matrix expands to a very large number of jobs, consuming server memory and potentially terminating the Gitea process. No runner is required. Static matrices above 256 combinations are now rejected before expansion. |
| When Gitea's web installer is reachable against a database that already contains users, such as after `INSTALL_LOCK` has been reset to `false`, submitting the install form with an administrator username matching an existing account issued an authenticated session for that account without verifying its password. If the account is an administrator, the session grants full administrative access, including changing the account's password. Databases with a single user also did not require the reinstall confirmation. |
| With `[migrations] ALLOWED_DOMAINS` set to a matching entry such as `*` or a hostname wildcard, Gitea's migration URL validation could permit reserved and link-local addresses, such as `169.254.169.254`, even when `ALLOW_LOCALNETWORKS = false`. The local-network block list did not cover these ranges, and a hostname matching the allow list was accepted regardless of its resolved address. A user who can start migrations on such an instance could reach these addresses from the Gitea server; the default empty `ALLOWED_DOMAINS` configuration is not affected. |
| A repository's external issue tracker regular expression containing alternating capture groups could produce invalid slice indexes when Gitea rendered issue references, causing a runtime panic that terminated the Gitea process. A user who can edit a repository's external issue tracker settings could make any later rendering of matching content, such as viewing a README, crash the instance for all users. |
| When processing issue and comment bodies, Gitea scanned the entire preceding text for action keywords such as "closes" or "fixes" once per Markdown link, giving processing time quadratic in the input size. An authenticated user able to submit issue or comment content could send a crafted body of about 1 MB that keeps a CPU core busy for several minutes while holding a database transaction open. |
| Gitea Actions decided whether a fork pull request run needed approval based on the user who triggered the event rather than the pull request author. For `pull_request` activity triggered by a maintainer during ordinary triage, such as adding a label, the run was created without requiring approval, while the workflow definition was still taken from the fork head. Where Actions is enabled and a matching runner is registered, fork-controlled workflow code could run on the base repository's runners without an explicit approval. |
| Vim is an open source, command line text editor. Prior to 9.2.0840, runtime/plugin/netrwPlugin.vim loads netrw and runtime/pack/dist/opt/netrw/autoload/netrw.vim constructs Bookmarks, History, and Targets menu entries by interpolating attacker-controlled directory paths into executed :menu commands. s:NetrwBookmarkMenu(), s:NetrwTgtMenu(), g:netrw_menu_escape, EX_TRLBAR, and netrw#MakeTgt() fail to neutralize the | command separator or single quotes at five construction sites, allowing a crafted path browsed or bookmarked in GUI Vim to execute arbitrary Ex and operating-system commands. This issue is fixed in version 9.2.0840. |
| When a push was authenticated with a deploy key, Gitea recorded the repository owner as the pusher, so permission checks in the push hook pipeline evaluated the owner instead of the deploy key. A holder of a writable deploy key could create protected tags without being on the tag allow list and change repository visibility through push options, for example making a private repository public. Pull requests created through the AGit flow with a deploy key were also attributed to the owner. |
