| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OS command injection vulnerability in CONPROSYS IoT Gateway products allows a remote authenticated attacker who can access Network Maintenance page to execute arbitrary OS commands with a root privilege. The affected products and versions are as follows: M2M Gateway with the firmware Ver.3.7.10 and earlier (CPS-MG341-ADSC1-111, CPS-MG341-ADSC1-931, CPS-MG341G-ADSC1-111, CPS-MG341G-ADSC1-930, and CPS-MG341G5-ADSC1-931), M2M Controller Integrated Type with firmware Ver.3.7.6 and earlier versions (CPS-MC341-ADSC1-111, CPS-MC341-ADSC1-931, CPS-MC341-ADSC2-111, CPS-MC341G-ADSC1-110, CPS-MC341Q-ADSC1-111, CPS-MC341-DS1-111, CPS-MC341-DS11-111, CPS-MC341-DS2-911, and CPS-MC341-A1-111), and M2M Controller Configurable Type with firmware Ver.3.8.8 and earlier versions (CPS-MCS341-DS1-111, CPS-MCS341-DS1-131, CPS-MCS341G-DS1-130, CPS-MCS341G5-DS1-130, and CPS-MCS341Q-DS1-131). |
| Inadequate encryption strength vulnerability in CONPROSYS IoT Gateway products allows a remote authenticated attacker with an administrative privilege to apply a specially crafted Firmware update file, alter the information, cause a denial-of-service (DoS) condition, and/or execute arbitrary code. The affected products and versions are as follows: M2M Gateway with the firmware Ver.3.7.10 and earlier (CPS-MG341-ADSC1-111, CPS-MG341-ADSC1-931, CPS-MG341G-ADSC1-111, CPS-MG341G-ADSC1-930, and CPS-MG341G5-ADSC1-931), M2M Controller Integrated Type with firmware Ver.3.7.6 and earlier versions (CPS-MC341-ADSC1-111, CPS-MC341-ADSC1-931, CPS-MC341-ADSC2-111, CPS-MC341G-ADSC1-110, CPS-MC341Q-ADSC1-111, CPS-MC341-DS1-111, CPS-MC341-DS11-111, CPS-MC341-DS2-911, and CPS-MC341-A1-111), and M2M Controller Configurable Type with firmware Ver.3.8.8 and earlier versions (CPS-MCS341-DS1-111, CPS-MCS341-DS1-131, CPS-MCS341G-DS1-130, CPS-MCS341G5-DS1-130, and CPS-MCS341Q-DS1-131). |
| Improper Verification of Cryptographic Signature in SmartSwitch prior to SMR Dec-2024 Release 1 allows local attackers to install malicious applications. |
| Out-of-bound write in libsaped.so prior to SMR Dec-2024 Release 1 allows remote attackers to execute arbitrary code. |
| Heap out-of-bound write vulnerability in parsing grid image header in libsavscmn.so prior to SMR Jun-2024 Release 1 allows local attackers to execute arbitrary code. |
| Improper access control vulnerability in SmartManagerCN prior to SMR Jun-2024 Release 1 allows local attackers to launch privileged activities. |
| SvelteKit is a web development framework. The SvelteKit framework offers developers an option to create simple REST APIs. This is done by defining a `+server.js` file, containing endpoint handlers for different HTTP methods.
SvelteKit provides out-of-the-box cross-site request forgery (CSRF) protection to its users. While the implementation does a sufficient job in mitigating common CSRF attacks, prior to version 1.15.1, the protection can be bypassed by simply specifying a different `Content-Type` header value.
If abused, this issue will allow malicious requests to be submitted from third-party domains, which can allow execution of operations within the context of the victim's session, and in extreme scenarios can lead to unauthorized access to users’ accounts.
SvelteKit 1.15.1 updates the `is_form_content_type` function call in the CSRF protection logic to include `text/plain`. As additional hardening of the CSRF protection mechanism against potential method overrides, SvelteKit 1.15.1 is now performing validation on `PUT`, `PATCH` and `DELETE` methods as well. This latter hardening is only needed to protect users who have put in some sort of `?_method= override` feature themselves in their `handle` hook, so that the request that resolve sees could be `PUT`/`PATCH`/`DELETE` when the browser issues a `POST` request. |
|
Dell Trusted Device Agent, versions prior to 5.3.0, contain(s) an improper installation permissions vulnerability. An unauthenticated local attacker could potentially exploit this vulnerability, leading to escalated privileges.
|
| Due to a hardlink created in the ProgramData folder during the repair process of the software, the installer (MSI) of WARP Client for Windows (<= 2022.12.582.0) allowed a malicious attacker to forge the destination of the hardlink and escalate privileges, overwriting SYSTEM protected files.
As Cloudflare WARP client for Windows (up to version 2022.5.309.0) allowed creation of mount points from its ProgramData folder, during installation of the WARP client, it was possible to escalate privileges and overwrite SYSTEM protected files.
|
| Authentication Bypass by Capture-replay in GitHub repository thorsten/phpmyfaq prior to 3.1.12.
|
| A cross-site request forgery vulnerability has been identified in LoadMaster. It is possible for a malicious actor, who has prior knowledge of the IP or hostname of a specific LoadMaster, to direct an authenticated LoadMaster administrator to a third-party site. In such a scenario, the CSRF payload hosted on the malicious site would execute HTTP transactions on behalf of the LoadMaster administrator. |
| ONTAP Select Deploy administration utility versions 9.12.1.x,
9.13.1.x and 9.14.1.x are susceptible to a vulnerability which when
successfully exploited could allow a read-only user to escalate their
privileges.
|
| CENTUM series provided by Yokogawa Electric Corporation are vulnerable to cleartext storage of sensitive information. If an attacker who can login or access the computer where the affected product is installed tampers the password file stored in the computer, the user privilege which CENTUM managed may be escalated. As a result, the control system may be operated with the escalated user privilege. To exploit this vulnerability, the following prerequisites must be met: (1)An attacker has obtained user credentials where the affected product is installed, (2)CENTUM Authentication Mode is used for user authentication when CENTUM VP is used. The affected products and versions are as follows: CENTUM CS 1000, CENTUM CS 3000 (Including CENTUM CS 3000 Entry Class) R2.01.00 to R3.09.50, CENTUM VP (Including CENTUM VP Entry Class) R4.01.00 to R4.03.00, R5.01.00 to R5.04.20, and R6.01.00 and later, B/M9000 CS R5.04.01 to R5.05.01, and B/M9000 VP R6.01.01 to R7.04.51 and R8.01.01 and later |
| In telecom service, there is a missing permission check. This could lead to local denial of service in telecom service. |
| virtualenv before 20.26.6 allows command injection through the activation scripts for a virtual environment. Magic template strings are not quoted correctly when replacing. NOTE: this is not the same as CVE-2024-9287. |
| GLPI is a free asset and IT management software package. Starting in version 0.83 and prior to versions 9.5.13 and 10.0.7, an authenticated user can modify emails of any user, and can therefore takeover another user account through the "forgotten password" feature. By modifying emails, the user can also receive sensitive data through GLPI notifications. Versions 9.5.13 and 10.0.7 contain a patch for this issue. As a workaround, account takeover can be prevented by deactivating all notifications related to `Forgotten password?` event. However, it will not prevent unauthorized modification of any user emails. |
| A heap-based buffer overflow vulnerability exists in the way Ichitaro version 2022 1.0.1.57600 processes certain LayoutBox stream record types. A specially crafted document can cause a buffer overflow, leading to memory corruption, which can result in arbitrary code execution.To trigger this vulnerability, the victim would need to open a malicious, attacker-created document. |
| A use-after-free vulnerability exists within the way Ichitaro Word Processor 2022, version 1.0.1.57600, processes protected documents. A specially crafted document can trigger reuse of freed memory, which can lead to further memory corruption and potentially result in arbitrary code execution. An attacker can provide a malicious document to trigger this vulnerability. |
| An unprivileged (non-admin) user can exploit an Improper Access Control vulnerability in the Cloudflare WARP Client for Windows (<= 2022.12.582.0) to perform privileged operations with SYSTEM context by working with a combination of opportunistic locks (oplock) and symbolic links (which can both be created by an unprivileged user).
After installing the Cloudflare WARP Client (admin privileges required), an MSI-Installer is placed under C:\Windows\Installer. The vulnerability lies in the repair function of this MSI.
ImpactAn unprivileged (non-admin) user can exploit this vulnerability to perform privileged operations with SYSTEM context, including deleting arbitrary files and reading arbitrary file content. This can lead to a variety of attacks, including the manipulation of system files and privilege escalation.
PatchesA new installer with a fix that addresses this vulnerability was released in version 2023.3.381.0. While the WARP Client itself is not vulnerable (only the installer), users are encouraged to upgrade to the latest version and delete any older installers present in their systems.
|
| An issue was discovered in Insyde InsydeH2O with kernel 5.2 through 5.5. The Save State register is not checked before use. The IhisiSmm driver does not check the value of a save state register before use. Due to insufficient input validation, an attacker can corrupt SMRAM. |
