| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tpm_crb: Check ACPI_COMPANION() against NULL during probe
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
tpm_crb driver. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stack slot index in nospec checks
check_stack_write_fixed_off() computes the byte slot for a fixed-offset
stack write as -off - 1, and records each written byte in slot_type[] with
(slot - i) % BPF_REG_SIZE.
The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a
4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the
pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates
bytes 7..4. That can leave the second half-slot write without nospec_result
even though the bytes being overwritten still require sanitization.
Use the same slot index in the sanitization pre-check that the write path uses
when updating slot_type[]. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: msc313: fix NULL deref in shared IRQ handler at probe
msc313_rtc_probe() calls devm_request_irq() with IRQF_SHARED and
&pdev->dev as the cookie, but platform_set_drvdata() is only called
later after the clock setup. With a shared IRQ line, another device
on the same line can trigger the handler in that window. The
handler does dev_get_drvdata() on the cookie, gets NULL, and
dereferences priv->rtc_base in interrupt context.
Pass priv as the cookie directly so the handler reads it from
dev_id without the lookup, removing the dependency on probe order. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: sja1105: round up PTP perout pin duration
pin_duration is converted from the user-provided period to SJA1105
clock ticks and is later passed as the cycle_time argument to
future_base_time().
Very small period values may become zero after the conversion,
which can lead to a division by zero in future_base_time().
Round zero pin_duration up to 1 tick so that the smallest unsupported
periods use the minimum non-zero hardware duration instead of passing
zero to future_base_time(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: FCP: Fix NULL pointer dereference in interface lookup
A malformed USB device can provide a vendor-specific interface without
any endpoint descriptors. fcp_find_fc_interface() currently selects the
first vendor-specific interface and reads endpoint 0 from it, without
checking whether the interface actually has any endpoints.
When bNumEndpoints is zero, no endpoint array is allocated for the parsed
alternate setting, so get_endpoint(..., 0) yields an invalid endpoint
descriptor pointer. Dereferencing it through usb_endpoint_num() then
triggers a NULL pointer dereference.
Skip vendor-specific interfaces that do not have any endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: adm1275: Prevent reading uninitialized stack
While adding support for the ROHM BD127X0 hot-swap controllers, sashiko
reported an error in device-name comparison, which can lead to reading
uninitialized stack memory.
Quoting Sashiko:
This is a pre-existing issue, but I noticed that just before this block in
adm1275_probe(), there might be an out-of-bounds stack read:
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
if (ret < 0) { ... }
for (mid = adm1275_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
Since i2c_smbus_read_block_data() reads up to 32 bytes into the
uninitialized stack array block_buffer without appending a null
terminator, strncasecmp() could read past the valid bytes returned in ret.
For example, if the device returns a shorter string like "adm12", checking
it against "adm1275" up to the length of "adm1275" will continue reading
into uninitialized stack bounds.
Prevent reading uninitialized memory by zeroing the stack array. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (aspeed-g6-pwm-tach) Guard fan RPM calculation against divide-by-zero
Sashiko reports:
In the aspeed-g6-pwm-tacho driver, the aspeed_tach_val_to_rpm() function
calculates the fan RPM using the tachometer value. However, it does not
check if the tachometer value is zero before performing the division.
If the hardware reports a tachometer value of 0 (which can happen due to
an extremely fast pulse, a stuck edge, or a hardware glitch), the
calculated tach_div evaluates to 0. The subsequent call to do_div() with
tach_div as the divisor triggers a divide-by-zero exception, leading to
a kernel panic.
Check the divisor against zero to fix the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix potential invalid pointer deref in group_process_tiler_oom()
If heaps is an ERR_PTR(), panthor_heap_pool_put() will deref an invalid
pointer. Make sure we set it to NULL in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced
A group ref is tied to the pending tiler_oom_work, so we need to release
it if the cancel was effective. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry()
fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of
the per-ip fprobe list and fills it in a second walk, both under
rcu_read_lock() only. A fprobe registered on an already-live ip can
become visible between the two walks, so the fill walk processes an
exit_handler the sizing walk did not count and used runs past
reserved_words. If the sizing walk counted nothing, fgraph_data is NULL
and the first write_fprobe_header() faults:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167
Call Trace:
<TASK>
function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677
ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671
__kernel_text_address+0x9/0x40 kernel/extable.c:78
arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26
kmem_cache_free+0x188/0x580 mm/slub.c:6378
tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590
[...]
</TASK>
The list cannot be frozen across the two walks, so skip a node that does
not fit the reservation and count it as missed. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: refuse O_TMPFILE creation with an unmapped fsuid or fsgid
vfs_tmpfile() never checked that the caller's fsuid and fsgid map into
the filesystem. On an idmapped mount whose idmapping does not cover the
caller's fs{u,g}id, the ->tmpfile() instance initializes the new inode
through inode_init_owner(), where mapped_fsuid()/mapped_fsgid() return
INVALID_UID/INVALID_GID, and the tmpfile ends up owned by (uid_t)-1.
Every other creation path already refuses this: may_o_create() (O_CREAT)
and may_create_dentry() (mkdir, mknod, symlink, link) bail out with
-EOVERFLOW via fsuidgid_has_mapping() precisely so that an object cannot
be created with an owner the filesystem cannot represent. An O_TMPFILE
is no exception: it is created I_LINKABLE and linkat(2) can splice it
into the namespace afterwards, so the same guarantee must hold.
Add the missing fsuidgid_has_mapping() check to vfs_tmpfile(). On a
non-idmapped mount the caller's fs{u,g}id always map in the superblock's
user namespace, so this is a no-op there and only takes effect on an
idmapped mount that does not map the caller. It applies to every
filesystem that sets FS_ALLOW_IDMAP and implements ->tmpfile() (tmpfs,
ext4, btrfs, xfs, f2fs, ...), and to overlayfs, whose upper-layer
tmpfile creation funnels through vfs_tmpfile() via backing_tmpfile_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Remove setting of AS_RELEASE_ALWAYS for symlinks and mountpoints
Regular AFS files correctly use afs_file_aops which have release_folio
set as netfs_release_folio, so AS_RELEASE_ALWAYS is valid for them
when fscache is enabled (set via afs_vnode_set_cache()).
Symlinks and mountpoints in AFS use afs_dir_aops, which does not provide
a release_folio callback. However, afs_apply_status() unconditionally
calls mapping_set_release_always() for these.
In such case when memory management code attempts to release folios,
filemap_release_folio() checks folio_needs_release() which
returns true due to AS_RELEASE_ALWAYS being set. Since there is no
release_folio callback, it falls through to try_to_free_buffers(),
which at present expects buffer_heads to be not null. For symlinks
and mountpoints without buffer_heads, this causes pointer dereference.
[dh: Added more bits that were missed] |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix writethrough to use collection offload
Fix writethrough write to set NETFS_RREQ_OFFLOAD_COLLECTION on the request
so that collection is processed asynchronously rather than only right at
the end - and also so that asynchronous O_SYNC writes get collected at all. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio state after ENOMEM whilst under writeback iteration
Fix the state of the current folio when ENOMEM occurs during writeback
iteration. The folio needs to be redirtied and unlocked before the
terminal writeback_iter() is invoked. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pt: Fix NULL pointer dereference in xe_pt_zap_ptes_entry()
The page-table walk framework may pass a NULL *child pointer for
unpopulated entries. xe_pt_zap_ptes_entry() called container_of(*child)
before checking for NULL, then dereferenced the result, causing a crash.
Move the container_of() call after a NULL guard, so the function returns
early instead of proceeding with an invalid pointer. XE_WARN_ON is kept
to help root cause the issue, but we now bail instead of crashing the
driver.
v2: Comment that triggering XE_WARN_ON is unexpected behavior (Matt Brost)
(cherry picked from commit b9297d19d9df5d4b6c994648570c5dcd1cac68ff) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: fix NPD in bo_meminfo()
When a buffer object is purged, its ttm.resource is set to NULL via the
TTM pipeline gutting flow. However, the BO remains in the client's
object list until userspace explicitly closes the GEM handle. If memory
stats are queried during this time, accessing bo->ttm.resource->mem_type
will result in a NULL pointer dereference.
Fix this by safely skipping purged BOs in bo_meminfo, as they no longer
consume any memory.
User is getting NPD on device resume, and possible theory is that in
bo_move(), if we need to evict something to SYSTEM to save the CCS state,
but the BO is marked as dontneed, this won't trigger a move but will
nuke the pages, leaving us with a NULL bo resource. And the meminfo()
doesn't look ready to handle a NULL resource.
v2 (Sashiko):
- There could potentially be other cases where we might end up with a
NULL resource, so make this a general NULL check for now.
(cherry picked from commit c9a8e7daa0afe3161111e27fd92176e608c7f186) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt()
On links faster than ~34 Gbps, where byte rate may exceed 2^32-1
(~ 4.3 GBps), the comparison result becomes incorrect because the
truncated value no longer reflects the actual estimator rate.
Fix by changing the local variables to u64. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: bitland-mifs-wmi: Fix NULL pointer dereference during suspend/resume
The driver registers two distinct WMI devices: a control device
(BITLAND_WMI_CONTROL) and an event device (BITLAND_WMI_EVENT). During
the probe phase, the event device handling path returns early before
initializing the platform profile device (data->pp_dev), leaving it
NULL.
However, the PM sleep operations are registered globally for the WMI
driver and are triggered for both devices. When entering suspend, the
event device invokes bitland_mifs_wmi_suspend(), which passes the
uninitialized data->pp_dev (NULL) into laptop_profile_get(). This leads
to a NULL pointer dereference inside dev_get_drvdata(), causing a
kernel Oops and halting the suspend sequence.
Fix this by adding a validity check for data->pp_dev in both the suspend
and resume callbacks, safely skipping profile operations for the event
device. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: hold L2CAP conn across debugfs control
get_l2cap_conn() looks up an LE hci_conn under hdev protection, but
then drops that protection before reading hcon->l2cap_data and before
lowpan_control_write() later dereferences conn->hcon. A disconnect or
device close can tear down the same L2CAP connection in that window.
The buggy scenario involves two paths, with each column showing the order
within that path:
6LoWPAN control write: HCI disconnect/device close:
1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches
and hcon->l2cap_data. the L2CAP disconnect callback.
2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears
protection and returns conn. hcon->l2cap_data and drops the
L2CAP connection reference.
3. lowpan_control_write() reads 3. hci_conn_del() removes and drops
conn->hcon. the HCI connection.
Take a reference to the L2CAP connection with
l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that
reference after the debugfs command's last use of conn. This mirrors the
existing L2CAP ACL receive-side handoff and keeps the connection
dereferenceable after leaving hdev protection. Export the existing helper
so the bluetooth_6lowpan module can use the same lifetime primitive.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520
The buggy address belongs to the object at ffff888111b9d000 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of freed 1024-byte region
[ffff888111b9d000, ffff888111b9d400)
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__debugfs_file_get+0xf7/0x400
full_proxy_write+0x9e/0xd0
vfs_write+0x1b0/0x810
ksys_write+0xd2/0x170
dnotify_flush+0x32/0x220
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
l2cap_conn_add+0x45/0x520
l2cap_chan_connect+0xac6/0xd90
l2cap_sock_connect+0x216/0x350
__sys_connect+0x101/0x130
__x64_sys_connect+0x40/0x50
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
hci_conn_hash_flush+0xc0/0x140
hci_dev_close_sync+0x41a/0xb00
hci_dev_close+0x12f/0x160
hci_sock_ioctl+0x157/0x570
sock_do_ioctl+0xf7/0x210
sock_ioctl+0x32f/0x490
__x64_sys_ioctl+0xc7/0x110
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
kasan_record_aux_stack+0xa7/0xc0
insert_work+0x32/0x100
__queue_work+0x262/0xa60
queue_work_on+0xad/0xb0
l2cap_connect_cfm+0x4ef/0x670
hci_le_remote_feat_complete_evt+0x247/0x430
hci_event_packet+0x360/0x6f0
hci_rx_work+0x2ae/0x7a0
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Reject invalid indirect BO handle in indirect CSD setup
v3d_get_cpu_indirect_csd_params() looks up the indirect buffer object
from a userspace-supplied handle but never checks the result. A bogus
or stale handle makes drm_gem_object_lookup() return NULL, which is
then stored in info->indirect and only dereferenced later when the
indirect CSD job runs, turning a userspace mistake into a NULL pointer
dereference in the kernel.
Bail out with -ENOENT as soon as the lookup fails, so the bad handle is
rejected at submission time. |
