| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_task_from_vpid()
bpf_task_from_vpid() looks up a task in the pid namespace of the
current task, via find_task_by_vpid():
find_task_by_vpid(vpid)
find_task_by_pid_ns(vpid, task_active_pid_ns(current))
find_pid_ns(nr, ns) -> idr_find(&ns->idr, nr)
cgroup_skb programs run in softirq, which may interrupt a task that is
itself in do_exit(). Once that task has passed
exit_notify() -> release_task() -> __unhash_process(), its thread_pid is
cleared, so task_active_pid_ns(current) returns NULL and find_pid_ns()
dereferences &NULL->idr:
BUG: kernel NULL pointer dereference, address: 0000000000000050
RIP: 0010:idr_find+0x11/0x30 lib/idr.c:176
Call Trace:
<IRQ>
find_pid_ns kernel/pid.c:370 [inline]
find_task_by_pid_ns+0x3b/0xe0 kernel/pid.c:485
bpf_task_from_vpid+0x5b/0x200 kernel/bpf/helpers.c:2916
bpf_prog_run_array_cg+0x17e/0x530 kernel/bpf/cgroup.c:81
__cgroup_bpf_run_filter_skb+0x12b/0x250 kernel/bpf/cgroup.c:1612
sk_filter_trim_cap+0x1dc/0x4c0 net/core/filter.c:148
tcp_v4_rcv+0x18d1/0x2200 net/ipv4/tcp_ipv4.c:2223
</IRQ>
<TASK>
do_exit+0xa63/0x1270 kernel/exit.c:1010
get_signal+0x141c/0x1530 kernel/signal.c:3037
Bail out when current has no pid namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Fix recursive lock in device_cache_fw_images()
A recursive locking deadlock can occur in the firmware loader's power
management notification handler.
During system suspend or hibernation preparation, fw_pm_notify() calls
device_cache_fw_images(). This function acquires fw_lock to set the
firmware cache state to FW_LOADER_START_CACHE and then iterates over all
devices using dpm_for_each_dev() while still holding the lock.
For each device, dev_cache_fw_image() schedules asynchronous work to cache
the firmware. If memory allocation for the async work entry fails (e.g., in
out-of-memory conditions), async_schedule_node_domain() falls back to
executing the work function synchronously in the current thread.
The synchronous execution path (__async_dev_cache_fw_image() ->
cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire
fw_lock again. Since the current thread already holds fw_lock, this results
in a recursive locking deadlock.
Fix this by releasing fw_lock immediately after updating the cache state
and before calling dpm_for_each_dev(). The lock is only needed to protect
the state update. Concurrent firmware requests will correctly see the
FW_LOADER_START_CACHE state and use the piggyback mechanism, which is
independently protected by its own fwc->name_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
find_vm_area() can return NULL if the given address is not a valid vmalloc
area. Check the return value before dereferencing it to avoid a kernel
crash. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: validate skb length in testmode query
In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg()
is used in a memcpy without validating its length:
memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN);
where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response
shorter than 520 bytes (8 + 512), this reads beyond the skb data
buffer. The over-read data is then returned to userspace via nla_put()
in mt7925_testmode_dump().
Add a length check before the memcpy to ensure the skb contains
sufficient data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible NULL pointer dereference in mt7996_mac_write_txwi_80211()
For injected frames (e.g. via radiotap), mac80211 can pass
info->control.vif = NULL, as explicitly noted in struct ieee80211_tx_info.
Check vif pointer before executing ieee80211_vif_is_mld() in
mt7996_mac_write_txwi_80211 routine in order to avoid a possible NULL
pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix kernel BUG in ext4_write_inline_data_end
When the data=journal mount option is used, the ext4_journalled_write_end()
function incorrectly calls ext4_write_inline_data_end() without checking
if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode.
If a previous attempt to convert the inline data to an extent failed (e.g.
due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but
the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next
call to ext4_write_begin() will not prepare the inline data xattr for
writing, but ext4_journalled_write_end() will incorrectly attempt to write
to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in
ext4_write_inline_data() since i_inline_size was not expanded.
Fix this by ensuring that ext4_journalled_write_end() only calls
ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is
set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_dmp_hdr() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_dmp_hdr() unconditionally dereferences hu->serdev->dev.driver->name,
causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check and falling back to
"hci_ldisc_qca" for the non-serdev case. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: fix URB leak in alloc_mtk_intr_urb error path
When btmtk_isopkt_pad() fails, the previously allocated URB is not freed,
leaking the urb structure. Add usb_free_urb() before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix FRMR set pinned push error path
Add destruction of FRMR handles in case the push to the pool fails.
This prevents resources leak in case pool page allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flow: Dont expose folded kernel pointers
The flow classifier falls back to addr_fold() for fields that are missing
from packet headers. In map mode, userspace controls mask, xor, rshift,
addend and divisor, and can observe the resulting classid through class
statistics. This allows a tc classifier in a user/network namespace to
recover the 32-bit folded value of skb->sk, skb_dst() or skb_nfct().
Align with standard kernel practices for pointer hashing and replace the
XOR folding with a keyed siphash (which is cryptographically secure) |
| In the Linux kernel, the following vulnerability has been resolved:
net: pfcp: allocate per-cpu tstats for PFCP netdevs
PFCP uses dev_get_tstats64() as its ndo_get_stats64 callback, but
pfcp_link_setup() does not request NETDEV_PCPU_STAT_TSTATS. The net
core therefore leaves dev->tstats NULL for PFCP devices.
Creating a PFCP rtnetlink device can immediately ask the new netdev for
stats while building the RTM_NEWLINK notification. That reaches
dev_get_tstats64() and dereferences the NULL dev->tstats pointer.
Set pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS during PFCP link setup so
the net core allocates the storage expected by dev_get_tstats64(). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fill first free targets[] slot during auto-discovery
Any invalid endpoint decoder pointer in the target array of an active
region is not allowed by cxl driver. This means cxl driver always
assumes the first p->nr_targets entries of the target array in an
auto-assembly region are valid. However, there are scenarios that could
leave NULL endpoint decoder pointer holes in the target array.
1. When cxl_cancel_auto_attach() removes an endpoint decoder from a
target array, the target slot is set to NULL. If the removed endpoint
decoder is not the last element in the target array, the target array
will contain a NULL hole.
2. When a auto-assembly region removes an assigned endpoint decoder, if
the removed endpoint decoder is not the last element in the target
array, always remains a NULL hole in the target array.
When a NULL pointer hole exists in a region's target array, it
introduces two potential problems:
1. Access an endpoint decoder via a NULL pointer. it always trigger
calltrace like that.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI
RIP: 0010:cxl_calc_interleave_pos+0x26/0x810 [cxl_core]
Call Trace:
<TASK>
cxl_region_attach+0xc50/0x2140 [cxl_core]
cxl_add_to_region+0x321/0x2330 [cxl_core]
discover_region+0x92/0x150 [cxl_port]
device_for_each_child+0xf3/0x170
cxl_port_probe+0x150/0x200 [cxl_port]
cxl_bus_probe+0x4f/0xa0 [cxl_core]
really_probe+0x1c8/0x960
__driver_probe_device+0x323/0x450
driver_probe_device+0x45/0x120
__device_attach_driver+0x15d/0x280
bus_for_each_drv+0x10f/0x190
2. Not having enough valid endpoint decoders attached to an
auto-assembly region. if an auto-assembly region is created with lock
flag or assigned endpoint decoder with lock flag, which means
assigned endpoint decoder will not be reset during detaching, they
could re-attach to the auto-assembly region again. But cxl region
driver relies on p->nr_targets to verify whether the required number
of endpoint decoders has been attached, and NULL endpoint decoder
pointers are still counted in that case.
To fix above issues, adjust cxl_region_attach_auto() logic to find the
first free target slot for endpoint decoder attachment, this ensures
NULL holes in the target array are filled, rather than adding new
endpoint decoders at the tail of the target array. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_dualpi2: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever dualpi2 drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will be
executed even though dualpi2 still has 1 packet on the queue and, thus,
mistakenly deactivates the parent's class which leads to a null-ptr-deref:
[ 101.427314][ T599] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI
[ 101.427755][ T599] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 101.428048][ T599] CPU: 2 UID: 0 PID: 599 Comm: ping Not tainted 7.1.0-rc5-00284-gbce53c430ed7 #102 PREEMPT(full)
[ 101.428400][ T599] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 101.428608][ T599] RIP: 0010:qfq_dequeue (net/sched/sch_qfq.c:1150) sch_qfq
[ 101.428821][ T599] Code: 00 fc ff df 80 3c 02 00 0f 85 46 0c 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 2d 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
All code
[ 101.429348][ T599] RSP: 0018:ffff8881110df4f0 EFLAGS: 00010216
[ 101.429541][ T599] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 101.429763][ T599] RDX: 0000000000000009 RSI: 00000024c0000000 RDI: ffff88811436c2b0
[ 101.429985][ T599] RBP: ffff88811436c000 R08: ffff88811436c280 R09: 1ffff11021277523
[ 101.430206][ T599] R10: 1ffff11021277526 R11: 1ffff11021277527 R12: 00000024c0000000
[ 101.430423][ T599] R13: ffff88811436c2b8 R14: 0000000000000048 R15: 0000000020000000
[ 101.430642][ T599] FS: 00007f61813e1c40(0000) GS:ffff8881691ef000(0000) knlGS:0000000000000000
[ 101.430913][ T599] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 101.431100][ T599] CR2: 00005651650850a8 CR3: 000000010ca0b000 CR4: 0000000000750ef0
[ 101.431320][ T599] PKRU: 55555554
[ 101.431433][ T599] Call Trace:
[ 101.431544][ T599] <TASK>
[ 101.431628][ T599] __qdisc_run (net/sched/sch_generic.c:322 net/sched/sch_generic.c:427 net/sched/sch_generic.c:445)
[ 101.431792][ T599] ? dev_qdisc_enqueue (./include/trace/events/qdisc.h:49 (discriminator 22) net/core/dev.c:4176 (discriminator 22))
[ 101.431941][ T599] __dev_queue_xmit (./include/net/pkt_sched.h:120 ./include/net/pkt_sched.h:117 net/core/dev.c:4292 net/core/dev.c:4831)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: initialize gdma queue id to INVALID_QUEUE_ID
mana_gd_create_mana_wq_cq() leaves queue->id as 0 (from kzalloc_obj())
until mana_create_wq_obj() assigns the firmware-returned id. If creation
fails before that, cleanup calls mana_gd_destroy_cq() with id 0, NULLing
gc->cq_table[0] and silently breaking whichever real CQ owns that slot.
Initialize queue->id to INVALID_QUEUE_ID right after allocation, matching
mana_gd_create_eq(). The existing (id >= max_num_cqs) guard then
short-circuits cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: check skb_clone in control TX
t7xx_port_ctrl_tx() clones each skb fragment before passing it to the
port transmit path. The clone is used immediately to set cloned->len, so
an skb_clone() failure results in a NULL pointer dereference.
Check the clone before using it. If previous fragments were already
queued, preserve the driver's existing partial-write behavior by
returning the number of bytes submitted so far. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid displaying the kernel pointer
While dumping the info on MR using the rdma tool, we
dump the mr_hwq which is a kernel pointer. There is
no need to expose this value for end user. So avoid
it. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix stainfo check in rtw_aes_decrypt
The null-pointer-guard was incorrect, returning _FAIL on valid pointer.
Invert the guard, so it returns _FAIL on invalid pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: most: video: avoid double free on video register failure
comp_register_videodev() allocates a video_device with
video_device_alloc() and releases it if video_register_device() fails.
This can double free the video_device when __video_register_device()
reaches device_register() and that call fails:
video_register_device()
-> __video_register_device()
-> device_register() fails
-> put_device(&vdev->dev)
-> v4l2_device_release()
-> vdev->release(vdev)
-> video_device_release(vdev)
comp_register_videodev()
-> video_device_release(mdev->vdev)
Use video_device_release_empty() while registering the device so that
registration failure paths do not free mdev->vdev through vdev->release().
comp_register_videodev() then releases mdev->vdev exactly once on failure.
Restore video_device_release() after successful registration so the
registered device keeps its normal lifetime handling.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: magnetometer: ak8975: fix potential kernel stack memory leak
Currently in the AK8975 driver there are four instances where potential
uninitialized kernel stack memory leaks can occur. If
i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than
the size of the buffer, uninitialized bytes are retained in the buffer
and later the buffer is passed on to IIO buffers, potentially leaking
memory to userspace.
Fix this by adding checks whether the return value of the function is
equal to the size of the buffer and subsequently if the value is
lesser than zero to distinguish from a returned error code. |
