| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix crash in bpf_[set|remove]_dentry_xattr for negative dentries
bpf_set_dentry_xattr and bpf_remove_dentry_xattr BPF kfuncs attempt to
lock the inode of the supplied dentry without checking if it is
NULL. If a negative dentry is passed (e.g. from
security_inode_create), d_inode(dentry) returns NULL, and
inode_lock(inode) will cause a NULL pointer dereference.
Trivially fix this by adding a NULL check for inode before attempting
to lock it, returning -EINVAL if it is NULL.
Additionally, drop WARN_ON(!inode) in bpf_xattr_read_permission() and
bpf_xattr_write_permission(). These warnings could be triggered by
passing a negative dentry to bpf_get_dentry_xattr() or the _locked
variants of the xattr kfuncs, potentially causing a Denial of Service
on systems with panic_on_warn enabled. Instead, simply return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix devx subscribe-event unwind NULL dereference
MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list
before initializing the fields used by the shared error path.
If eventfd_ctx_fdget() then fails, the unwind path dereferences
event_sub->ev_file in uverbs_uobject_put() and calls
subscribe_event_xa_dealloc() with an unset xa_key_level1.
subscribe_event_xa_alloc() creates the XA entry exactly once for a given
key_level1, on the first occurrence of that key. The unwind path must
therefore call subscribe_event_xa_dealloc() exactly once for it as well.
Enforce that by adding devx_key_in_sub_list() and calling
subscribe_event_xa_dealloc() only when the last matching pending entry is
being cleaned up. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/kmem: account for partial discontiguous resource upon removal
When dev_dax_kmem_probe() partially succeeds (at least one range is
mapped) but a subsequent range fails request_mem_region() or
add_memory_driver_managed(), the probe silently continues, ultimately
returning success, but with the corresponding range resource NULL'ed out.
dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if
the underlying resource exists. When remove_memory() is called later, it
returns 0 because the memory was never added which causes
dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can
be removed and attempts cleanup on a NULL pointer.
Fix this by skipping these ranges altogether, noting that these cases are
considered success, such that the cleanup is still reached when all
actually-added ranges are successfully removed. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix deadlock in read error recovery path
raid1d and raid10d may resubmit a split md cloned bio while handling
a read error. In this case, resubmitting the bio can lead to a deadlock
if the array is suspended before md_handle_request() acquires an
active_io reference via percpu_ref_tryget_live().
Since the cloned bio already holds an active_io reference,
trying to acquire another reference via percpu_ref_tryget_live()
can lead to a deadlock while the array is suspended.
Fix this by using percpu_ref_get() for md cloned bios. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix bio accounting for split md cloned bios
Use md_cloned_bio() to control bio accounting instead of relying
on r1bio_existed in raid1 or the io_accounting flag in raid10.
The previous logic does not reliably reflect whether a bio is an
md cloned bio. When a failed bio is split and resubmitted via
bio_submit_split_bioset() on the error path, this can lead to either
double accounting for md cloned bios, or missing accounting for bios
returned from bio_submit_split_bioset()
Fix this by using md_cloned_bio() to detect md cloned bios and
skip accounting accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix NULL deref in change_sta_links for unready link
_ieee80211_set_active_links() calls _ieee80211_link_use_channel() for
each newly-added link and WARN_ON_ONCE()s if it fails. The call uses
assign_on_failure=true, which allows mac80211 to continue despite
driver failures, but when a mac80211-level channel validation fails
(e.g., combinations check, DFS, or no available radio),
drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create()
is only called from that path, arvif->is_created remains false and
arvif->ar remains NULL for the failed link.
The subsequent drv_change_sta_links() call reaches
ath12k_mac_op_change_sta_links(), which allocates an arsta and sets
ahsta->links_map |= BIT(link_id) for the broken link before checking
whether the link is ready. When the vdev was never created, only
station_add() is skipped, but the link remains in links_map.
Any subsequent operation iterating links_map and dereferencing arvif->ar
without a NULL check will crash. Two observed examples are NULL deref in
ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key()
when wpa_supplicant installs PTK keys.
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
Call trace:
ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k]
drv_sta_state+0x100/0xbd8 [mac80211]
__sta_info_destroy_part2+0x148/0x178 [mac80211]
ieee80211_set_disassoc+0x500/0x678 [mac80211]
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
Call trace:
ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
drv_set_key+0x70/0x100 [mac80211]
ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211]
ieee80211_add_key+0x16c/0x2ac [mac80211]
nl80211_new_key+0x138/0x280 [cfg80211]
Fix this by checking arvif->is_created before calling
ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from
entering links_map, so all subsequent operations iterating the bitmap
are protected. The reliability of arvif->is_created across all error
paths is ensured by the preceding patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: require a ref for locking_state debugfs open
debug_lockres_open() copies inode->i_private into struct debug_lockres and
debug_lockres_release() later drops that pointer with dlm_put(). That
only works if open successfully pins the struct dlm_ctxt.
Today open calls dlm_grab(dlm) but ignores its return value. Once the
last domain unregister has removed the context from dlm_domains,
dlm_grab() returns NULL, yet open still stores the raw pointer and returns
success. The later release path is outside the debugfs removal barrier,
so it can call dlm_put() after dlm_free_ctxt_mem() has freed the context.
KASAN reports this as a slab-use-after-free in dlm_put() called from
debug_lockres_release().
Fail the open when dlm_grab() cannot acquire the reference and unwind the
seq_file private state before returning. That keeps locking_state from
handing out a file descriptor whose release path does not own the
dlm_ctxt.
The buggy scenario involves two paths, with each column showing the order
within that path:
locking_state debugfs open: last domain unregister:
1. debug_lockres_open() reads 1. dlm_unregister_domain() calls
inode->i_private. dlm_complete_dlm_shutdown().
2. debug_lockres_open() calls 2. shutdown removes the dlm_ctxt from
dlm_grab(dlm) and gets NULL. dlm_domains.
3. open still stores the raw dlm 3. final teardown reaches
pointer in dl->dl_ctxt and dlm_free_ctxt_mem() and frees it.
returns success.
4. debug_lockres_release() later
calls dlm_put(dl->dl_ctxt).
Validation reproduced this kernel report:
KASAN slab-use-after-free in dlm_put+0x82/0x200
RIP: 0033:0x7f4d349bc9e0
The buggy address belongs to the object at ffff888103a3c000 which belongs
to the cache kmalloc-2k of size 2048
The buggy address is located 816 bytes inside of freed 2048-byte region
[ffff888103a3c000, ffff888103a3c800)
Write of size 4
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xd0/0x630 (?:?)
dlm_put+0x82/0x200 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x188/0x2f0 (?:?)
kasan_report+0xe4/0x120 (?:?)
kasan_check_range+0x105/0x1b0 (?:?)
debug_lockres_release+0x53/0x80 (fs/ocfs2/dlm/dlmdebug.c:587)
dlm_put+0x9/0x200 (?:?)
debug_lockres_release+0x5c/0x80 (fs/ocfs2/dlm/dlmdebug.c:587)
full_proxy_release+0x67/0x90 (?:?)
__fput+0x1df/0x4b0 (?:?)
do_raw_spin_lock+0x10f/0x1b0 (?:?)
fput_close_sync+0xd2/0x170 (?:?)
__x64_sys_close+0x55/0x90 (?:?)
do_syscall_64+0x10c/0x640 (arch/x86/entry/syscall_64.c:87)
irqentry_exit+0xac/0x6e0 (?:?)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Freed by task stack:
kasan_save_stack+0x33/0x60 (?:?)
kasan_save_track+0x14/0x30 (?:?)
kasan_save_free_info+0x3b/0x60 (?:?)
__kasan_slab_free+0x5f/0x80 (?:?)
kfree+0x30f/0x580 (?:?)
dlm_put+0x1ce/0x200 (?:?)
dlm_unregister_domain+0xf6/0xb30 (?:?)
o2cb_cluster_disconnect+0x6b/0x90 (?:?)
ocfs2_cluster_disconnect+0x41/0x70 (?:?)
ocfs2_dlm_shutdown+0x1c4/0x220 (?:?)
ocfs2_dismount_volume+0x38a/0x550 (?:?)
generic_shutdown_super+0xc3/0x220 (?:?)
kill_block_super+0x29/0x60 (?:?)
deactivate_locked_super+0x66/0xe0 (?:?)
cleanup_mnt+0x13d/0x210 (?:?)
task_work_run+0xfa/0x170 (?:?)
exit_to_user_mode_loop+0xd6/0x430 (?:?)
do_syscall_64+0x3cb/0x640 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NMI/tracepoint re-entry deadlock on lru locks
NMI and tracepoint BPF programs can re-enter the per-CPU or global
LRU lock that bpf_lru_pop_free()/push_free() already hold on the
same CPU, AA-deadlocking. Lockdep reports "inconsistent
{INITIAL USE} -> {IN-NMI}" on &l->lock (syzbot c69a0a2c816716f1e0d5)
and "possible recursive locking detected" on &loc_l->lock (syzbot
18b26edb69b2e19f3b33).
Prior trylock and rqspinlock based fixes (see links) were nacked
because compromised on reliability.
This patch converts every LRU lock site to rqspinlock_t and adds a
recovery path for some failure windows to avoid node leaks.
Failure recovery:
- *_pop_free top-level: return NULL; prealloc_lru_pop() already
treats that as no-free-element (-ENOMEM).
- Cross-CPU steal: skip the victim's locked loc_l, try next CPU.
- Post-steal local lock fail: publish stolen node to lockless
per-CPU free_llist; next pop on this CPU picks it up.
- push_free fail: mark node pending_free=1. __local_list_flush(),
__local_list_pop_pending() reclaim the node from pending_list.
__bpf_lru_list_shrink_inactive() reclaims the node from inactive
list. Nodes from active list are reclaimed by __bpf_lru_list_shrink()
or after __bpf_lru_list_rotate_active() demotes it to the inactive. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_task_from_vpid()
bpf_task_from_vpid() looks up a task in the pid namespace of the
current task, via find_task_by_vpid():
find_task_by_vpid(vpid)
find_task_by_pid_ns(vpid, task_active_pid_ns(current))
find_pid_ns(nr, ns) -> idr_find(&ns->idr, nr)
cgroup_skb programs run in softirq, which may interrupt a task that is
itself in do_exit(). Once that task has passed
exit_notify() -> release_task() -> __unhash_process(), its thread_pid is
cleared, so task_active_pid_ns(current) returns NULL and find_pid_ns()
dereferences &NULL->idr:
BUG: kernel NULL pointer dereference, address: 0000000000000050
RIP: 0010:idr_find+0x11/0x30 lib/idr.c:176
Call Trace:
<IRQ>
find_pid_ns kernel/pid.c:370 [inline]
find_task_by_pid_ns+0x3b/0xe0 kernel/pid.c:485
bpf_task_from_vpid+0x5b/0x200 kernel/bpf/helpers.c:2916
bpf_prog_run_array_cg+0x17e/0x530 kernel/bpf/cgroup.c:81
__cgroup_bpf_run_filter_skb+0x12b/0x250 kernel/bpf/cgroup.c:1612
sk_filter_trim_cap+0x1dc/0x4c0 net/core/filter.c:148
tcp_v4_rcv+0x18d1/0x2200 net/ipv4/tcp_ipv4.c:2223
</IRQ>
<TASK>
do_exit+0xa63/0x1270 kernel/exit.c:1010
get_signal+0x141c/0x1530 kernel/signal.c:3037
Bail out when current has no pid namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Fix recursive lock in device_cache_fw_images()
A recursive locking deadlock can occur in the firmware loader's power
management notification handler.
During system suspend or hibernation preparation, fw_pm_notify() calls
device_cache_fw_images(). This function acquires fw_lock to set the
firmware cache state to FW_LOADER_START_CACHE and then iterates over all
devices using dpm_for_each_dev() while still holding the lock.
For each device, dev_cache_fw_image() schedules asynchronous work to cache
the firmware. If memory allocation for the async work entry fails (e.g., in
out-of-memory conditions), async_schedule_node_domain() falls back to
executing the work function synchronously in the current thread.
The synchronous execution path (__async_dev_cache_fw_image() ->
cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire
fw_lock again. Since the current thread already holds fw_lock, this results
in a recursive locking deadlock.
Fix this by releasing fw_lock immediately after updating the cache state
and before calling dpm_for_each_dev(). The lock is only needed to protect
the state update. Concurrent firmware requests will correctly see the
FW_LOADER_START_CACHE state and use the piggyback mechanism, which is
independently protected by its own fwc->name_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
find_vm_area() can return NULL if the given address is not a valid vmalloc
area. Check the return value before dereferencing it to avoid a kernel
crash. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: validate skb length in testmode query
In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg()
is used in a memcpy without validating its length:
memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN);
where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response
shorter than 520 bytes (8 + 512), this reads beyond the skb data
buffer. The over-read data is then returned to userspace via nla_put()
in mt7925_testmode_dump().
Add a length check before the memcpy to ensure the skb contains
sufficient data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible NULL pointer dereference in mt7996_mac_write_txwi_80211()
For injected frames (e.g. via radiotap), mac80211 can pass
info->control.vif = NULL, as explicitly noted in struct ieee80211_tx_info.
Check vif pointer before executing ieee80211_vif_is_mld() in
mt7996_mac_write_txwi_80211 routine in order to avoid a possible NULL
pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix kernel BUG in ext4_write_inline_data_end
When the data=journal mount option is used, the ext4_journalled_write_end()
function incorrectly calls ext4_write_inline_data_end() without checking
if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode.
If a previous attempt to convert the inline data to an extent failed (e.g.
due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but
the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next
call to ext4_write_begin() will not prepare the inline data xattr for
writing, but ext4_journalled_write_end() will incorrectly attempt to write
to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in
ext4_write_inline_data() since i_inline_size was not expanded.
Fix this by ensuring that ext4_journalled_write_end() only calls
ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is
set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_dmp_hdr() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_dmp_hdr() unconditionally dereferences hu->serdev->dev.driver->name,
causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check and falling back to
"hci_ldisc_qca" for the non-serdev case. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: fix URB leak in alloc_mtk_intr_urb error path
When btmtk_isopkt_pad() fails, the previously allocated URB is not freed,
leaking the urb structure. Add usb_free_urb() before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix FRMR set pinned push error path
Add destruction of FRMR handles in case the push to the pool fails.
This prevents resources leak in case pool page allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flow: Dont expose folded kernel pointers
The flow classifier falls back to addr_fold() for fields that are missing
from packet headers. In map mode, userspace controls mask, xor, rshift,
addend and divisor, and can observe the resulting classid through class
statistics. This allows a tc classifier in a user/network namespace to
recover the 32-bit folded value of skb->sk, skb_dst() or skb_nfct().
Align with standard kernel practices for pointer hashing and replace the
XOR folding with a keyed siphash (which is cryptographically secure) |
| In the Linux kernel, the following vulnerability has been resolved:
net: pfcp: allocate per-cpu tstats for PFCP netdevs
PFCP uses dev_get_tstats64() as its ndo_get_stats64 callback, but
pfcp_link_setup() does not request NETDEV_PCPU_STAT_TSTATS. The net
core therefore leaves dev->tstats NULL for PFCP devices.
Creating a PFCP rtnetlink device can immediately ask the new netdev for
stats while building the RTM_NEWLINK notification. That reaches
dev_get_tstats64() and dereferences the NULL dev->tstats pointer.
Set pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS during PFCP link setup so
the net core allocates the storage expected by dev_get_tstats64(). |
