| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: reject overly deep qdisc hierarchies
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth. |
| Allocation of resources without limits or throttling in .NET allows an unauthorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Repost Receive buffers for malformed replies
rpcrdma_wc_receive() decrements the transport's Receive count for
every completion before it dispatches a successful Receive to
rpcrdma_reply_handler(). The handler must post a replacement
Receive WR before returning unless ownership of the rep has moved
elsewhere, as on the backchannel path.
Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC
senders and posting Receives") moved the Receive refill out of
rpcrdma_wc_receive(), where it had run ahead of every reply, into
rpcrdma_reply_handler() so that the responder's credit grant could
be parsed before reposting. The bad-version and short-reply exits
never reach that refill: they recycle the rep and return without
calling rpcrdma_post_recvs().
A remote peer can therefore drain the client's posted Receive
queue by sending a sustained stream of replies that are shorter
than the fixed transport header or that carry an unrecognized
RPC/RDMA version. Each such reply consumes one posted Receive
without replacing it. Once the queue empties, the peer's next
Send finds no posted Receive and the transport stalls until
reconnect.
Route both malformed-reply exits through the shared repost tail
after recycling the rep, refilling against buf->rb_credits, the
most recent accepted credit grant. Neither exit updates the
congestion window, so RPCs admitted under the previous grant
remain in flight awaiting replies. A smaller refill target would
let a stream of malformed replies ratchet the posted Receive count
down to the batch floor while the congestion window still admits
rb_credits RPCs; a burst of valid replies to those RPCs could then
overrun the posted Receives, and because the client connects with
rnr_retry_count of zero, a single RNR NAK terminates the
connection. Refilling against rb_credits also restores the target
that applied to malformed replies before commit 2ae50ad68cd7
("xprtrdma: Close window between waking RPC senders and posting
Receives") when rpcrdma_post_recvs() computed it from rb_credits
internally. rb_credits is at least one from connection
establishment onward, so the repost path always keeps Receives
posted. |
| FreeRDP from 3.30.0 before 3.32.0 contains a resource exhaustion vulnerability in the rdpecam client that lets malicious RDP servers request unadvertised camera media types. Attackers can send a StartStreamsRequest with oversized dimensions to force large pending-sample allocations and reconfigure the local camera through the HAL. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in hexpm hex allows an untrusted package mirror to exhaust the memory or disk space of the machine running mix deps.get, mix deps.update, mix hex.package fetch or mix hex.docs fetch.
Hex treats a mirror configured with HEX_MIRROR_URL, HEX_MIRROR or mirror_url as untrusted: it doesn't send credentials to it, and it checks registry signatures and package checksums that the mirror can't forge. Several response paths consume memory or disk in proportion to what the mirror sends before any of those checks run.
Hex.HTTP.request/5 reads the whole response body into memory and decompresses it with :zlib.gunzip/1 whenever the response's Content-Encoding contains gzip, with no limit on the compressed or decompressed size. Hex doesn't ask for compressed responses, so the server decides whether this step runs. It applies to registry, package, docs and API responses.
Package tarballs have no download size limit. Hex 2.5.1 holds the whole tarball in memory and writes it to the cache, and the development branch streams it to a temporary file; the 16 MiB tarball limit is checked only when the file is unpacked. The tarball is then unpacked, into deps/<app> in 2.5.1 and into a staging directory on the development branch, before its checksums are compared with the registry.
mix hex.docs fetch, and mix hex.docs offline when docs are missing, write the docs tarball to disk and extract it with :mix_hex_erl_tar.extract/2 without the 16 MiB compressed and 128 MiB decompressed limits that mix_hex_tarball:unpack_docs/3 applies. The signed registry doesn't cover docs tarballs, so nothing checks them.
Registry responses are also decompressed before their signature is checked, in hex_core code that Hex vendors; that part is tracked in https://github.com/hexpm/hex_core/security/advisories/GHSA-7c4r-cgf9-9jmq.
This issue affects hex: from 0.11.2 before 2.5.2. |
| FreeRDP from 2.0.0 before 3.32.0 contains an unbounded reassembly vulnerability in WTSProcessChannelData that fails to enforce cumulative fragment limits. Authenticated clients can start a static virtual channel message, withhold the LAST flag, and send endless fragments to exhaust server memory. |
| n8n before 2.41.4 and 2.42.x before 2.42.1 contains an uncontrolled resource consumption vulnerability in the unauthenticated OAuth authorize endpoint, which resolves clients by URL path but stores the caller's raw identifier as the record key. Unauthenticated attackers can send identifiers differing only in their query string to create unlimited first-party client records that bypass the registration cap, growing the database until the disk fills. |
| In Apache CXF, the parser for multipart/MTOM attachment part headers did not fully enforce the configured attachment-max-header-size (default 300 characters) and attachment-headers-max-count (default 500) limits. The size limit was applied only to each physical line, not to a header value built from continuation lines or to the combined values of a repeated header. The count limit was checked against the number of distinct header names, not the total number of header lines. A remote, unauthenticated attacker could send a multipart request with very large folded or repeated part headers. The server would then allocate memory without bound, causing a denial of service.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| By default, StaxUtils placed no limit on the total number of elements or the total number of characters in an XML document. A very large request could therefore use a lot of memory and CPU during parsing, especially where CXF builds a DOM from the input (for example SAAJ or WS-Security), and could cause a denial of service when no request size limit was configured. Both limits now have defaults: the maximum element count is 100 × maxChildElements (5,000,000 by default), and the maximum document size is 256M characters. Applications that process larger documents can raise the limits with the org.apache.cxf.stax.maxElementCount and org.apache.cxf.stax.maxXMLCharacters properties.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| FreeRDP from 3.0.0 before 3.32.0 contains an uncontrolled resource consumption vulnerability in parse_nla_mode_pdu that allows unauthenticated attackers to exhaust server memory. Attackers can complete TLS and stream bytes not beginning with the DER SEQUENCE tag 0x30, causing unbounded receive buffer growth before NLA authentication. |
| An unauthenticated remote attacker may use an allocation of resources without limits or throttling weakness in the affected product to cause high CPU load leading to a denial of service. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1, Atom exhaustion: OAuth2 JWT tag: scope values. extractscopes/1 parses scopes of the form .tag: and calls rabbitdatacoercion:toatom() to convert to a tag atom. The token signature is verified first, so the attacker cannot forge scopes , but in IdP configurations where scope content is user-influenced, each login with a novel tag value leaks one In deployments where users can influence the scopes included in their IdP-issued JWT rabbitmqauthbackendoauth2 enabled IdP permits attacker-influenced scope values in signed tokens. This issue is fixed in versions 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1. |
| An unauthenticated user with network access to the Ops Manager web port can repeatedly request monitoring endpoints that perform costly work without rate limiting. This can temporarily slow other traffic served by the same process while requests continue. |
| Uncontrolled Recursion vulnerability in Protobuf.JSON.Decode in elixir-protobuf protobuf allows an unauthenticated remote attacker to crash the decoding process via a deeply nested JSON document. Any application that decodes attacker-supplied JSON with Protobuf.JSON.decode/3, Protobuf.JSON.decode!/3, or Protobuf.JSON.from_decoded/3 into a schema that contains a self-referential or cyclic message type is affected.
In lib/protobuf/json/decode.ex, the embedded-message clause of decode_singular/3 recurses into internal_from_json_data/3 once per nesting level without incrementing or checking the decoder's depth counter. The depth guard increase_depth_and_maybe_throw/1 covers only the Google.Protobuf.ListValue and Google.Protobuf.Struct clauses, so the recursion_limit option has no effect on user-defined message types. Each nesting level allocates a stack frame and heap objects, and a sufficiently deep document exhausts the memory of the decoding process. Confidentiality and integrity are not affected.
This issue affects protobuf: from 0.8.0 before 0.17.1. |
| OWASP Coraza WAF is a golang modsecurity compatible web application firewall library. From 3.0.0 until 3.8.1, Coraza silently drops arguments after SecArgumentsLimit in internal/corazawaf/transaction.go, while internal/bodyprocessors/urlencoded.go writes ARGS_POST without enforcing the cap. The flaw is triggered when an unauthenticated attacker sends more arguments than SecArgumentsLimit or supplies bodies that expand beyond the configured argument and flattening budgets. An unauthenticated attacker can flood requests with arguments so excess values are silently omitted from ARGS, ARGS_GET, ARGS_NAMES, ARGS_GET_NAMES, ARGS_POST, or ARGS_PATH before security rules inspect them; affected urlencoded and JSON processing can also consume excessive memory. The omission can bypass WAF rules protecting the downstream application, and unbounded or amplified argument processing can cause memory consumption and service degradation. This issue is fixed in version 3.8.1. |
| ImageMagick before 6.9.13-57 and 7.x before 7.1.2-32 contains a stack overflow in the MSL decoder caused by an incorrect depth check that fails to limit recursion. Attackers can supply a set of crafted MSL images that exhaust the stack when one of them is read, crashing the process and causing a denial of service. |
| nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync. This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid online resizing failures due to oversized flex bg
When we online resize an ext4 filesystem with a oversized flexbg_size,
mkfs.ext4 -F -G 67108864 $dev -b 4096 100M
mount $dev $dir
resize2fs $dev 16G
the following WARN_ON is triggered:
==================================================================
WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550
Modules linked in: sg(E)
CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314
RIP: 0010:__alloc_pages+0x411/0x550
Call Trace:
<TASK>
__kmalloc_large_node+0xa2/0x200
__kmalloc+0x16e/0x290
ext4_resize_fs+0x481/0xd80
__ext4_ioctl+0x1616/0x1d90
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xf0/0x150
do_syscall_64+0x3b/0x90
==================================================================
This is because flexbg_size is too large and the size of the new_group_data
array to be allocated exceeds MAX_ORDER. Currently, the minimum value of
MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding
maximum number of groups that can be allocated is:
(PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ≈ 21845
And the value that is down-aligned to the power of 2 is 16384. Therefore,
this value is defined as MAX_RESIZE_BG, and the number of groups added
each time does not exceed this value during resizing, and is added multiple
times to complete the online resizing. The difference is that the metadata
in a flex_bg may be more dispersed. |
| Allocation of resources without limits or throttling in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| IBM DataPower Gateway 10.5.0.0 through 10.5.0.22, 10.6.1 through 10.6.6, 10.6.0.0 through 10.6.0.10, and 11.0.0.0 through 11.0.0.2 could allow a remote attacker to cause a denial of service due to improper validation of the length field during memory reallocation. |