| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix TX DMA mapping leak for AddBA req frames
mt7996/mt7992 hand the firmware a HW MAC-TXP for AddBA req action frames
(MT_TXD7_MAC_TXD, set in mt7996_mac_write_txwi_80211()), but are otherwise
FW-TXP devices. On tx free mt76_connac_txp_skb_unmap() therefore decodes
the per-frame txp as a struct mt76_connac_fw_txp. For a MAC-TXP the
fw_txp.nbuf byte aliases the AddBA TID word (MT_TXP1_TID_ADDBA), which is
always zero, so the unmap loop runs zero times and the skb DMA mapping in
buf[1] is never unmapped. buf[1].skip_unmap is set unconditionally, so the
generic DMA-ring cleanup skips it as well.
Each AddBA req therefore leaks one TX DMA mapping, roughly one per
(re)association. With WED enabled these mappings are bounced through the
WED swiotlb pool, so under continuous client reconnect churn the pool is
exhausted after ~1-2 days, after which DMA mapping fails for WED, the WiFi
MCU and other on-SoC consumers.
Keep the deferred (token release) unmap that the design relies on, and add
an mt7996-specific txp unmap that inspects MT_TXD7_MAC_TXD and unmaps
buf[1] from the MAC-TXP layout for those frames, delegating to
mt76_connac_txp_skb_unmap() otherwise. |
| n8n is an open source workflow automation platform. Prior to 2.37.7 and 2.38.2, the OAuth Dynamic Client Registration endpoint bounded redirect_uris but accepted arbitrarily large client_name and grant_types values. An unauthenticated remote caller could repeatedly persist oversized values in oauth_clients and exhaust database storage. The affected validation is in packages/cli/src/modules/oauth-server/oauth-server.service.ts, including MAX_CLIENT_NAME_LENGTH and MAX_GRANT_TYPES. This issue is fixed in versions 2.37.7 and 2.38.2. |
| undici's decompress interceptor decompresses response bodies according to the untrusted Content-Encoding header. While the number of content-encoding layers is capped, the total decompressed output size is unbounded and there is no configuration option to limit it. A malicious or faulty upstream can therefore return a small compressed payload, a compression bomb, that expands to hundreds of megabytes or more in client memory, an asymmetric resource consumption that can exhaust memory and crash the process. This affects undici versions from 7.15.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| Use after free in Microsoft Edge (Chromium-based) allows an unauthorized attacker to execute code over a network. |
| An authorization bypass vulnerability in LXD allows an authenticated user to bypass project-level disk and volume limits. Two related code paths fail to verify resource limits during volume operations: the storagePoolVolumeTypePostMove function omits the limits.AllowVolumeCreation check before moving a volume across projects, and volume snapshot restore operations skip the AllowVolumeUpdate check when the configuration is nil (Config == nil). An attacker can exploit these flaws to allocate storage resources that exceed the administrative limits configured for a project. |
| Traefik is an HTTP reverse proxy and load balancer. In versions >= v2.8.2 through <= v2.11.55 and >= v3.0.0 through <= v3.7.11, the entryPoints.<name>.transport.respondingTimeouts settings — notably readTimeout, which is enabled by default at 60s — are not applied to the HTTP/3 request path. readTimeout is enforced as a deadline on the underlying TCP connection, which cannot be applied to a QUIC stream, and Traefik's HTTP/3 server is constructed without any timeout. As a result, on entry points with HTTP/3 enabled, an unauthenticated remote client that trickles request body bytes can hold a request open indefinitely and, with it, one upstream connection per request, exhausting bounded backend connection pools and causing denial of service. The issue was introduced in v2.8.2 when a quic-go API change removed the embedded http.Server that carried these timeouts. Fixed in v2.11.56 and v3.7.12. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to command execution. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to command execution. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to command execution. |
| ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0. |
| Axios is a promise based HTTP client for the browser and Node.js. Axios versions 1.7.0 through 1.15.x did not enforce configured request and response size limits when requests were sent with the fetch adapter. Applications that selected adapter: 'fetch', or ran in environments where axios resolved to the fetch adapter, could receive or send bodies larger than maxContentLength or maxBodyLength despite those limits being explicitly configured. This can cause resource exhaustion in server-side usage when a malicious or compromised server returns an oversized response, when an attacker can supply a large data: URL, or when an application forwards attacker-controlled request bodies through axios while relying on maxBodyLength as a boundary. This vulnerability is fixed in 0.32.0 and 1.16.0. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, the MQTT 5 header Properties section is parsed and buffered before any message size limit is applied. Specifically, in MqttDecoder, the decodeVariableHeader() method is called before the bytesRemainingBeforeVariableHeader > maxBytesInMessage check. The decodeVariableHeader() can call other methods which will call decodeProperties(). Effectively, Netty does not apply any limits to the size of the properties being decoded. Additionally, because MqttDecoder extends ReplayingDecoder, Netty will repeatedly re-parse the enormous Properties sections and buffer the bytes in memory, until the entire thing parses to completion. This can cause high resource usage in both CPU and memory. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final. |
| Full details and mitigation steps are currently restricted and will be published at a later date. |
| pgjdbc is an open source postgresql JDBC Driver. From version 42.2.0 to before version 42.7.11, pgjdbc is vulnerable to a client-side denial of service during SCRAM-SHA-256 authentication. A malicious server can instruct the driver to perform SCRAM authentication with a very large iteration count. With a large enough value, the client spends an unbounded amount of CPU time inside PBKDF2 before authentication can fail. A single attempt ties up a CPU core. Repeated or concurrent attempts exhaust client CPU and can wedge connection pools. In affected versions, loginTimeout did not fully mitigate this problem. When loginTimeout expired, the caller could stop waiting, but the worker thread performing the connection attempt could continue running and burning CPU inside the SCRAM PBKDF2 computation. This issue has been patched in version 42.7.11. |
| In Micrometer, it is possible for a user to provide specially crafted HTTP requests that may cause a denial-of-service (DoS) condition.
Affected versions:
micrometer-core 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18; 1.9.0 through 1.9.17.
micrometer-jetty11 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18.
micrometer-jetty12 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18. |
| In Micrometer, it is possible for a user to provide specially crafted gRPC requests that may cause a denial-of-service (DoS) condition.
Affected versions:
Micrometer 1.16.0 through 1.16.5; 1.15.0 through 1.15.11. |
| spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTINGS frame entry count, the header count in parseHeaderValueBlock, and individual header field sizes — all read as 32-bit integers and used directly as allocation sizes with no bounds checking. Because SPDY header blocks are zlib-compressed, a small on-the-wire payload can decompress into large attacker-controlled values. A remote peer that can send SPDY frames to a service using spdystream can exhaust process memory and cause an out-of-memory crash with a single crafted control frame. This issue has been fixed in version 0.5.1. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.36.0 to 1.40.0, multi-value baggage: header extraction parses each header field-value independently and aggregates members across values. This allows an attacker to amplify cpu and allocations by sending many baggage: header lines, even when each individual value is within the 8192-byte per-value parse limit. This vulnerability is fixed in 1.41.0. |
| Impact:
The undici WebSocket client enforces maxPayloadSize on the cumulative byte count of fragments in a message but does not enforce a limit on the number of fragments. A malicious WebSocket server can stream many small or empty continuation frames that each pass per-frame and cumulative-size validation, collectively causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.
Affected applications are those using the undici WebSocket client (new WebSocket(...)) or the WebSocketStream API that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.
All releases starting at undici 6.17.0 are affected.
Patches: Upgrade to undici >= 6.26.0, >= 7.28.0, or >= 8.5.0. Workarounds:
No workaround is available. The fix must be applied through an upgrade. |
