| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't leak new_bp if xfs_btree_bload_drop_buf fails
LOLLM observes that in xfs_btree_bload_prep_block,
xfs_btree_bload_drop_buf can hit an IO error if writing the delwri
buffer list to disk fails. In this case, we fail to release new_bp,
which means we lose a locked buffer. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix missing kunmap in afs_dir_search_bucket()
Fix afs_dir_search_bucket() to kunmap the block it's using in the "bad:"
path. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: ifcvf: Put device on unsupported feature error
Route unsupported provisioned features through the common error path after
vdpa_alloc_device() so the allocated device and adapter pointer are
released consistently. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: release all action references on NEWACTION failure
When a batched RTM_NEWACTION request replaces an existing action,
tcf_idr_check_alloc() takes a temporary reference on it. If a later
action fails to initialize, tcf_action_destroy() uses strict release
semantics to clean up the actions initialized so far. For an action
bound to a filter, the strict check returns -EPERM without dropping
the temporary reference.
This error also makes tcf_action_destroy() return before releasing
subsequent entries. Any new action initialized between the bound
action and the failing entry is leaked together with its reserved
IDR slot, preventing reuse of its index.
Use tcf_idr_release() to drop each reference held by the batch without
rejecting bound actions. This allows cleanup to continue through all
initialized entries and preserves the module reference release when
an action is destroyed. Explicit action deletion and flushing retain
their separate bind-count checks. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: flowlabel: cap duplicate leases per socket
ipv6_flowlabel_get() allocates an ipv6_fl_socklist entry for every
successful GET. The recheck path for a compatible existing flowlabel
links another lease without applying any lease admission check. Repeated
GET requests for one shareable label can therefore grow a socket's lease
list without bound.
Reject a new unprivileged lease once the socket already holds
FL_MAX_PER_SOCK leases. Check this on the shared recheck path so reuse
of a globally interned label, including the fl_intern() collision path,
is covered as well. New-label admission remains under the existing
mem_check() policy.
Use capable(CAP_NET_ADMIN) rather than ns_capable(), matching
mem_check(). An unprivileged user must not bypass the cap by creating a
user namespace and a netns where they have CAP_NET_ADMIN, which would
still consume host memory.
Check the capability only when the socket reaches the limit, so
successful unprivileged GET requests below the cap do not generate a
capability audit. Do the admission check before updating linger and
expires so a rejected GET does not refresh the shared label, matching
the existing socket-list allocation failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix memory leak in query_perf_config_list()
When krealloc() fails, free the original oa_config_ids before returning
to avoid a memory leak.
(cherry picked from commit 9977e9d84f46d4f12ad35fbbc0ec4638554bce87) |
| In the Linux kernel, the following vulnerability has been resolved:
ice: add missing xa_destroy for sched_node_ids
Commit 16dfa49406bc ("ice: Introduce new parameters in ice_sched_node")
added a sched_node_ids xarray to the port info structure, but never called
xa_destroy on it.
Since xarrays can allocate internal memory, this can result in a memory
leak even if every element in the xarray has been removed.
The xarray is currently embedded in the port_info structure. This appears
to have been done because its use is within functions that take the
port_info as a primary argument.
However, this complicates managing the lifecycle of the field. The
port_info structure is allocated in ice_init_hw() using devm, and it is
not released until the devm cleanup when the driver is unloaded.
The ice_init_hw() function is called in many places, including devlink
reload, and possibly during DDP load after updating the Tx scheduler
layout.
Adding a call of xa_destroy to the ice_deinit_hw() causes Sashiko to raise
multiple concerns due to potential ordering issues and possible ways that
port_info could be a dangling reference.
To handle this, move the sched_node_ids out of port_info and into the hw
structure. All users of the array already have a pointer to hw anyways, and
there is only one sched_node_ids per adapter. While here, remove the overly
verbose comment explaining the nature of the sched_node_ids xarray.
Add the missing xa_destroy to the cleanup path and to ice_deinit_hw(),
ensuring that we properly release the xarray memory.
This was caught by Sashiko during development of unrelated code. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the var ref when its initialization fails
create_var_ref() allocates a VAR_REF hist_field and then calls
init_var_ref() to fill it in. When that fails the field is leaked.
commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy
var_refs") made destroy_hist_field() return early for
HIST_FIELD_FL_VAR_REF, since var refs are freed by walking the trigger's
var_refs[] array instead. create_var_ref() adds the field to that array
only after init_var_ref() has succeeded, so on this path the field is in
neither place and nothing frees it. The call was correct when it was
written, before var refs were taken out of destroy_hist_field().
init_var_ref() cannot free it either. The caller owns the field, so
init_var_ref() undoes only its own string allocations and leaves the
field alone. Freeing it there would leave create_var_ref() passing freed
memory to destroy_hist_field(), which reads its flags.
Call __destroy_hist_field(), which frees the field without consulting
the flag. |
| In the Linux kernel, the following vulnerability has been resolved:
sunvdc: unmap LDC cookies when the descriptor send fails
__send_request() maps the request's pages into the LDC channel's map
table (ldc_map_sg()), fills in the descriptor and marks it
VIO_DESC_READY before ringing the doorbell via __vdc_tx_trigger().
When the trigger fails, the error path only prints a message: the
descriptor stays READY and the cookies are never unmapped. The
mapping is normally released in vdc_end_one() when the peer completes
the descriptor - but a descriptor whose doorbell was never sent will
never complete, and since dr->prod is not advanced on failure, the
reset path (vdc_requeue_inflight(), which walks [cons, prod)) never
visits it either. The map table entries are leaked permanently.
Since commit a11f6ca9aef9 ("sunvdc: Do not spin in an infinite loop
when vio_ldc_send() returns EAGAIN") trigger failures occur in
practice under load, so every resulting I/O error also leaks one
request's worth of entries from the fixed-size (8192 entries per
channel) map table. Because the allocator hands out contiguous
ranges, fragmentation makes large multi-segment requests fail first
as the table drains, until ldc_map_sg() fails permanently and the
disk is dead until reboot.
It also makes any retry-based recovery unusable: requeuing the
request on -EAGAIN remaps the pages on every attempt, overwriting
desc->cookies and orphaning the previous mapping, so the table
drains at the retry rate. This is the memory exhaustion observed
when the requeue approach was first tested in October 2025.
Roll back on failure: unmap the cookies, mark the descriptor FREE
again and clear the request entry. If the trigger failed with
-ENOTCONN, __vdc_tx_trigger() has already reset the port, which
tears down and reallocates both the dring and the LDC channel
including its map table - nothing to roll back, and the stale
descriptor must not be touched. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.17.0, a crafted PDF can provide unusually large Roman page-label values that cause pypdf/_page_labels.py to generate excessively large numeral strings when an application retrieves document page labels, consuming large amounts of memory and potentially making the application unavailable. This issue is fixed in version 6.17.0. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.18.1, a crafted PDF can provide a TrueType or Type1 simple font with an unusually large /Widths array, causing pypdf/_font.py Font._collect_tt_t1_character_widths to process entries beyond the 256 character codes meaningful for a simple font and consume excessive memory during operations such as text extraction. This issue is fixed in version 6.18.1. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: free learned nodes on device setup failure
hsr_dev_finalize() can fail after a lower-device RX handler has
already been registered (slave A is added before the failable slave B
and interlink adds). RX handlers run in softirq regardless of the
master's state, so frames received in that window can learn dynamic
nodes into node_db, and the error unwind never releases them.
Free both owned dynamic databases in the unwind, mirroring
hsr_dellink(). proxy_node_db is provably empty on every current error
exit (only interlink RX feeds it, and the interlink add is the last
failable step) and is freed for symmetry. The order is safe:
hsr_del_port() unregisters each RX handler with synchronize_net()
before hsr_del_nodes() runs, which removes remaining entries with
list_del_rcu() and defers their release with call_rcu() for readers
already under RCU. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.19.0, a crafted PDF can provide unusually large alphabetical page-label values that cause pypdf/_page_labels.py to generate strings beyond a reasonable page-label length when an application retrieves document page labels, consuming excessive memory and potentially making the application unavailable. This issue is fixed in version 6.19.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_route: free emptied bucket on filter move
route4_change can move an existing filter to a different top-level
bucket: route4_set_parms recomputes the handle from TCA_ROUTE4_TO/
FROM/IIF, and the handle-mismatch check is gated on the 'new' flag, so
for an existing filter the new handle may differ from the old one and
land in a different bucket. When this happens, the filter is unlinked
from the old bucket, but the bucket itself is never freed once it goes
empty. The stale empty bucket remains in head->table[], causing
route4_delete to report *last=false even after the last live filter is
gone. That pins the empty tcf_proto and causes a leak.
Fix this by refcounting the filters linked to a bucket and freeing the
bucket when the count drops to zero. The existing scan in route4_delete
goes away with it.
The count is updated at all sites that link or unlink a filter during add,
change and delete, and the bucket is dropped from head->table[] as soon as
it reaches zero.
Conditions to recreate the bug:
CONFIG_NET_CLS_ROUTE4=y, CONFIG_NET_SCH_INGRESS=y, CONFIG_NET_CLS_ACT=y.
tc qdisc replace dev lo clsact
tc filter add dev lo ingress protocol ip pref 100 route from 1 to 1
tc filter change dev lo ingress protocol ip pref 100 handle 0x10001 \
route from 1 to 2
tc filter del dev lo ingress protocol ip pref 100 handle 0x10002 \
route from 1 to 2
tc filter show dev lo ingress | grep -c 'pref 100 route chain 0 ' |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: destroy the phylink instance on the probe error path
macb_mii_init() creates a phylink instance on both of its success paths,
but the probe unwind frees the netdev without destroying it, so a failing
macb_alloc_tieoff() or register_netdev() leaks the instance.
Destroy it at err_out_unregister_mdio, which is only reachable once
macb_mii_init() has succeeded, so bp->phylink is valid there. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: return compat ioctl results directly
The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but
then calls the native handler. Their different command sizes make native
dispatch return -ENOIOCTLCMD.
For GET_FD, this overwrites receive_fd()'s return value after the
descriptor is installed, leaking one fd per call. Return handled compat
results directly and use native dispatch only for other commands. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Count dropped frames as NAPI work
The RX loop only consumes budget when it successfully delivers a frame.
Error paths keep consuming descriptors without reducing the budget, so a
stream of bad frames can process the entire receive ring in one poll.
Move the budget accounting to a common end-of-frame path. This counts
each completed frame as NAPI work whether it was delivered or dropped,
matching the behavior of the vendor driver. |
| A command injection vulnerability exists in CLI of the affected HPE Networking Instant ON APs that could allow an unauthenticated adjacent attacker to perform command injection by sending specially crafted packets. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| Command injection vulnerabilities exist in the affected interface of HPE Networking Instant ON that could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| Issue summary: QUIC process may keep memory for QUIC packet
buffer for much longer period than necessary.
Impact summary: Remote peer can exploit this vulnerability
by sending maliciously crafted packets, making the local
QUIC stack to keep the memory for packet buffers allocated.
The time for which the memory remains allocated is entirely
under the control of the potentially malicious remote peer.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: To save copy operation from the packet buffer to the
stream reassemble buffer the QUIC stack leaves the stream data
on the packet buffer waiting to be copied to a buffer provided
by the local receiving application. The QUIC stack releases
a reference to the packet buffer only after the data are copied
to the application buffer. This design is more efficient for
legitimate data transfers but enables an attacker to allocate a lot
more memory than actually required by the data kept in the receiving
stream buffer.
To mitigate the vulnerability, the QUIC stack now calculates
and monitors memory overhead for every stream. The memory overhead
for a single stream frame is calculated as a difference between the
size of the whole packet that carries the stream frame and the size
of the stream frame itself. The memory overhead for a single stream
frame is added to the total (cumulative) memory overhead QUIC stack
keeps for each stream. Once the cumulative memory overhead exceeds
64kB, the QUIC stack moves the stream frame data from the packet
buffer to the stream buffer, starting with the next packet received.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
