| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs: Fix uninitialized value issue in from_kuid and from_kgid
ocfs2_setattr() uses attr->ia_mode, attr->ia_uid and attr->ia_gid in
a trace point even though ATTR_MODE, ATTR_UID and ATTR_GID aren't set.
Initialize all fields of newattrs to avoid uninitialized variables, by
checking if ATTR_MODE, ATTR_UID, ATTR_GID are initialized, otherwise 0. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix warning in ovl_create_real()
Syzbot triggered the following warning in ovl_workdir_create() ->
ovl_create_real():
if (!err && WARN_ON(!newdentry->d_inode)) {
The reason is that the cgroup2 filesystem returns from mkdir without
instantiating the new dentry.
Weird filesystems such as this will be rejected by overlayfs at a later
stage during setup, but to prevent such a warning, call ovl_mkdir_real()
directly from ovl_workdir_create() and reject this case early. |
| Multiple vulnerabilities in Aqara Hub firmware update process in the Camera Hub G3 4.1.9_0027, Hub M2 4.3.6_0027, and Hub M3 4.3.6_0025 devices, allow attackers to install malicious firmware without proper verification. The device fails to validate firmware signatures during updates, uses outdated cryptographic methods that can be exploited to forge valid signatures, and exposes information through improperly initialized memory. |
| The Web interface of Evolution Controller Versions 2.04.560.31.03.2024 and below does not proper sanitize user input, allowing for an unauthenticated attacker to crash the controller software |
| In OffloadAMRWriter, a scalar field is not initialized so will contain an arbitrary value left over from earlier computations |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.3.0 through 3.3.5 and 3.4.0 through 3.4.2, while fuzzing `openexr_exrcheck_fuzzer`, Valgrind reports a conditional branch depending on uninitialized data inside `generic_unpack`. This indicates a use of uninitialized memory. The issue can result in undefined behavior and/or a potential crash/denial of service. Versions 3.3.6 and 3.4.3 fix the issue. |
| A maliciously crafted STP file, when parsed in stp_aim_x64_vc15d.dll through Autodesk applications, can be used to uninitialized variables. This vulnerability, along with other vulnerabilities, can lead to code execution in the current process. |
| A maliciously crafted MODEL file, when parsed in ASMkern229A.dllthrough Autodesk applications, can be used to uninitialized variables. This vulnerability, along with other vulnerabilities, could lead to code execution in the current process. |
| A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs.
Insufficient or missing checking of return values of functions leads to unexpected work with variables that have not been initialized. |
| A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs.
The following problems were caused by insufficient control of the response APDU buffer and its length when communicating with the card. |
| A vulnerability was found in pkcs15-init in OpenSC. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs.
Insufficient or missing checking of return values of functions leads to unexpected work with variables that have not been initialized. |
| A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK.
The problem is missing initialization of variables expected to be initialized (as arguments to other functions, etc.). |
| An information disclosure vulnerability exists in the ClientConnect() functionality of SoftEther VPN 5.01.9674. A specially crafted network packet can lead to a disclosure of sensitive information. An attacker can perform a man-in-the-middle attack to trigger this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: initialise extack before use
Fix missing initialisation of extack in flow offload. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Using uninitialized value *size when calling amdgpu_vce_cs_reloc
Initialize the size before calling amdgpu_vce_cs_reloc, such as case 0x03000001.
V2: To really improve the handling we would actually
need to have a separate value of 0xffffffff.(Christian) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: replace skb_put with skb_put_zero
Avoid potentially reusing uninitialized data |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid uninitialized value in BPF_CORE_READ_BITFIELD
[Changes from V1:
- Use a default branch in the switch statement to initialize `val'.]
GCC warns that `val' may be used uninitialized in the
BPF_CRE_READ_BITFIELD macro, defined in bpf_core_read.h as:
[...]
unsigned long long val; \
[...] \
switch (__CORE_RELO(s, field, BYTE_SIZE)) { \
case 1: val = *(const unsigned char *)p; break; \
case 2: val = *(const unsigned short *)p; break; \
case 4: val = *(const unsigned int *)p; break; \
case 8: val = *(const unsigned long long *)p; break; \
} \
[...]
val; \
} \
This patch adds a default entry in the switch statement that sets
`val' to zero in order to avoid the warning, and random values to be
used in case __builtin_preserve_field_info returns unexpected values
for BPF_FIELD_BYTE_SIZE.
Tested in bpf-next master.
No regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
usb-storage: alauda: Check whether the media is initialized
The member "uzonesize" of struct alauda_info will remain 0
if alauda_init_media() fails, potentially causing divide errors
in alauda_read_data() and alauda_write_lba().
- Add a member "media_initialized" to struct alauda_info.
- Change a condition in alauda_check_media() to ensure the
first initialization.
- Add an error check for the return value of alauda_init_media(). |
| IBM Security Verify Access Appliance 10.0.0 through 10.0.7 uses uninitialized variables when deploying that could allow a local user to cause a denial of service. IBM X-Force ID: 287318. |
