| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| HTTP request desynchronization in Ping Identity PingAccess, all versions prior to 8.0.1 affected allows an attacker to send specially crafted http header requests to create a request smuggling condition for proxied requests. |
| The “ipaddress” module contained incorrect information about whether certain IPv4 and IPv6 addresses were designated as “globally reachable” or “private”. This affected the is_private and is_global properties of the ipaddress.IPv4Address, ipaddress.IPv4Network, ipaddress.IPv6Address, and ipaddress.IPv6Network classes, where values wouldn’t be returned in accordance with the latest information from the IANA Special-Purpose Address Registries.
CPython 3.12.4 and 3.13.0a6 contain updated information from these registries and thus have the intended behavior. |
| h11 is a Python implementation of HTTP/1.1. Prior to version 0.16.0, a leniency in h11's parsing of line terminators in chunked-coding message bodies can lead to request smuggling vulnerabilities under certain conditions. This issue has been patched in version 0.16.0. Since exploitation requires the combination of buggy h11 with a buggy (reverse) proxy, fixing either component is sufficient to mitigate this issue. |
| A vulnerability has been identified in APOGEE PXC+TALON TC Series (BACnet) (All versions). Affected devices start sending unsolicited BACnet broadcast messages after processing a specific BACnet createObject request. This could allow an attacker residing in the same BACnet network to send a specially crafted message that results in a partial denial of service condition of the targeted device, and potentially reduce the availability of BACnet network. A power cycle is required to restore the device's normal operation. |
| Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') vulnerability in Quest Coexistence Manager for Notes (Free/Busy Connector modules) allows HTTP Request Smuggling via the Content-Length-Transfer-Encoding (CL.TE) attack vector. This could allow an attacker to bypass access controls, poison web caches, hijack sessions, or trigger unintended internal requests. This issue affects Coexistence Manager for Notes 3.8.2045. Other versions may also be affected. |
| Apollo Router is a configurable, graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. The affected versions of Apollo Router contain a bug that in limited circumstances, could lead to unexpected operations being executed which can result in unintended data or effects. This only affects Router instances configured to use distributed query plan caching. The root cause of this defect is a bug in Apollo Router’s cache retrieval logic: When this defect is present and distributed query planning caching is enabled, asking the Router to execute an operation (whether it is a query, a mutation, or a subscription) may result in an unexpected variation of that operation being executed or the generation of unexpected errors. The issue stems from inadvertently executing a modified version of a previously executed operation, whose query plan is stored in the underlying cache (specifically, Redis). Depending on the type of the operation, the result may vary. For a query, results may be fetched that don’t match what was requested (e.g., rather than running `fetchUsers(type: ENTERPRISE)` the Router may run `fetchUsers(type: TRIAL)`. For a mutation, this may result in incorrect mutations being sent to underlying subgraph servers (e.g., rather than sending `deleteUser(id: 10)` to a subgraph, the Router may run `deleteUser(id: 12)`. Users who are using distributed query plan caching, are advised to either upgrade to version 1.45.1 or above or downgrade to version 1.43.2 of the Apollo Router. Apollo Router versions 1.44.0 or 1.45.0 are not recommended for use and have been withdrawn. Users unable to upgrade can disable distributed query plan caching to mitigate this issue. |
| An issue was discovered in Akamai Ghost, as used for the Akamai CDN platform before 2025-03-26. Under certain circumstances, a client making an HTTP/1.x OPTIONS request with an "Expect: 100-continue" header, and using obsolete line folding, can lead to a discrepancy in how two in-path Akamai servers interpret the request, allowing an attacker to smuggle a second request in the original request body. |
| Unintended proxy or intermediary ('Confused Deputy') issue exists in HMI ViewJet C-more series and HMI GC-A2 series, which may allow a remote unauthenticated attacker to use the product as an intermediary for FTP bounce attack. |
| A vulnerability classified as critical was found in mhuertos phpLDAPadmin up to 665dbc2690ebeb5392d38f1fece0a654225a0b38. Affected by this vulnerability is the function makeHttpRequest of the file htdocs/js/ajax_functions.js. The manipulation leads to http request smuggling. The attack can be launched remotely. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The patch is named dd6e9583a2eb2ca085583765e8a63df5904cb036. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-270523. |
| NVIDIA Jetson Linux and IGX OS image contains a vulnerability in the UEFI firmware RCM boot mode, where an unprivileged attacker with physical access to the device could load untrusted code. A successful exploit might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure. The scope of the impacts can extend to other components. |
| An unintended proxy or intermediary in the AMD power management firmware (PMFW) could allow a privileged attacker to send malformed messages to the system management unit (SMU) potentially resulting in arbitrary code execution. |
| Varnish Cache before 7.6.3 and 7.7 before 7.7.1, and Varnish Enterprise before 6.0.13r14, allow client-side desync via HTTP/1 requests, because the product incorrectly permits CRLF to be skipped to delimit chunk boundaries. |
| A flaw was found in Quarkus-HTTP, which incorrectly parses cookies with
certain value-delimiting characters in incoming requests. This issue could
allow an attacker to construct a cookie value to exfiltrate HttpOnly cookie
values or spoof arbitrary additional cookie values, leading to unauthorized
data access or modification. The main threat from this flaw impacts data
confidentiality and integrity. |
| code-server runs VS Code on any machine anywhere through browser access. Prior to version 4.99.4, a maliciously crafted URL using the proxy subpath can result in the attacker gaining access to the session token. Failure to properly validate the port for a proxy request can result in proxying to an arbitrary domain. The malicious URL `https://<code-server>/proxy/[email protected]/path` would be proxied to `[email protected]/path` where the attacker could exfiltrate a user's session token. Any user who runs code-server with the built-in proxy enabled and clicks on maliciously crafted links that go to their code-server instances with reference to /proxy. Normally this is used to proxy local ports, however the URL can reference the attacker's domain instead, and the connection is then proxied to that domain, which will include sending cookies. With access to the session cookie, the attacker can then log into code-server and have full access to the machine hosting code-server as the user running code-server. This issue has been patched in version 4.99.4. |
| An HTTP Request Smuggling [CWE-444] vulnerability in the Authentication portal of WatchGuard Fireware OS allows a remote attacker to evade request parameter sanitation and perform a reflected self-Cross-Site Scripting (XSS) attack.This issue affects Fireware OS: from 12.0 through 12.11.2. |
| kro (Kube Resource Orchestrator) 0.1.0 before 0.2.1 allows users (with permission to create or modify ResourceGraphDefinition resources) to supply arbitrary container images. This can lead to a confused-deputy scenario where kro's controllers deploy and run attacker-controlled images, resulting in unauthenticated remote code execution on cluster nodes. |
| Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') vulnerability in ithewei libhv allows HTTP Response Smuggling.This issue affects libhv: through 1.3.3. |
| mitmproxy is a interactive TLS-capable intercepting HTTP proxy for penetration testers and software developers and mitmweb is a web-based interface for mitmproxy. In mitmweb 11.1.1 and below, a malicious client can use mitmweb's proxy server (bound to `*:8080` by default) to access mitmweb's internal API (bound to `127.0.0.1:8081` by default). In other words, while the cannot access the API directly, they can access the API through the proxy. An attacker may be able to escalate this SSRF-style access to remote code execution. The mitmproxy and mitmdump tools are unaffected. Only mitmweb is affected. This vulnerability has been fixed in mitmproxy 11.1.2 and above. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| In Menlo On-Premise Appliance before 2.88, web policy may not be consistently applied properly to intentionally malformed client requests. This is fixed in 2.88.2+, 2.89.1+, and 2.90.1+. |
| A flaw was found in Undertow, which incorrectly parses cookies with certain value-delimiting characters in incoming requests. This issue could allow an attacker to construct a cookie value to exfiltrate HttpOnly cookie values or spoof arbitrary additional cookie values, leading to unauthorized data access or modification. The main threat from this flaw impacts data confidentiality and integrity. |
