| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wings is the server control plane for Pterodactyl, a free, open-source game server management panel. Prior to version 1.12.0, websockets within wings lack proper rate limiting and throttling. As a result a malicious user can open a large number of connections and then request data through these sockets, causing an excessive volume of data over the network and overloading the host system memory and cpu. Additionally, there is not a limit applied to the total size of messages being sent or received, allowing a malicious user to open thousands of websocket connections and then send massive volumes of information over the socket, overloading the host network, and causing increased CPU and memory load within Wings. Version 1.12.0 patches the issue. |
| CVE-2026-0517 is a denial-of-service vulnerability in versions of Secure
Access Server prior to 14.20. An attacker can send a specially crafted packet
to a server and cause the server to crash |
| pypdf is a free and open-source pure-python PDF library. Prior to version 6.4.0, an attacker who uses this vulnerability can craft a PDF which leads to a memory usage of up to 1 GB per stream. This requires parsing the content stream of a page using the LZWDecode filter. This issue has been patched in version 6.4.0. |
| A vulnerability was found in Open5GS up to 2.7.6. Affected by this issue is the function sgwc_s5c_handle_create_session_response of the file src/sgwc/s5c-handler.c. Performing a manipulation results in denial of service. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The patch is named b19cf6a2dbf5d30811be4488bf059c865bd7d1d2. To fix this issue, it is recommended to deploy a patch. |
| A vulnerability has been found in birkir prime up to 0.4.0.beta.0. The affected element is an unknown function of the file /graphql of the component GraphQL Directive Handler. The manipulation leads to denial of service. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in birkir prime up to 0.4.0.beta.0. Impacted is an unknown function of the file /graphql of the component GraphQL Field Handler. Executing a manipulation can lead to denial of service. The attack may be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Wings is the server control plane for Pterodactyl, a free, open-source game server management panel. Starting in version 1.7.0 and prior to version 1.12.0, Wings does not consider SQLite max parameter limit when processing activity log entries allowing for low privileged user to trigger a condition that floods the panel with activity records. After Wings sends activity logs to the panel it deletes the processed activity entries from the wings SQLite database. However, it does not consider the max parameter limit of SQLite, 32766 as of SQLite 3.32.0. If wings attempts to delete more than 32766 entries from the SQLite database in one query, it triggers an error (SQL logic error: too many SQL variables (1)) and does not remove any entries from the database. These entries are then indefinitely re-processed and resent to the panel each time the cron runs. By successfully exploiting this vulnerability, an attacker can trigger a situation where wings will keep uploading the same activity data to the panel repeatedly (growing each time to include new activity) until the panels' database server runs out of disk space. Version 1.12.0 fixes the issue. |
| A vulnerability was determined in Open5GS up to 2.7.6. Impacted is the function sgwc_s11_handle_downlink_data_notification_ack of the file src/sgwc/s11-handler.c of the component sgwc. This manipulation causes denial of service. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Patch name: b4707272c1caf6a7d4dca905694ea55557a0545f. To fix this issue, it is recommended to deploy a patch. The issue report is flagged as already-fixed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit
Always purge mcu skb queues in mt7915_mcu_exit routine even if
mt7915_firmware_state fails. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie()
Do `kfree_skb(new)` before `goto out` to prevent potential leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: Fix memory leak in alloc_wbufs()
kmemleak reported a sequence of memory leaks, and show them as following:
unreferenced object 0xffff8881575f8400 (size 1024):
comm "mount", pid 19625, jiffies 4297119604 (age 20.383s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8176cecd>] __kmalloc+0x4d/0x150
[<ffffffffa0406b2b>] ubifs_mount+0x307b/0x7170 [ubifs]
[<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0
[<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230
[<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0
[<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270
[<ffffffff83c14295>] do_syscall_64+0x35/0x80
[<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
unreferenced object 0xffff8881798a6e00 (size 512):
comm "mount", pid 19677, jiffies 4297121912 (age 37.816s)
hex dump (first 32 bytes):
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace:
[<ffffffff8176cecd>] __kmalloc+0x4d/0x150
[<ffffffffa0418342>] ubifs_wbuf_init+0x52/0x480 [ubifs]
[<ffffffffa0406ca5>] ubifs_mount+0x31f5/0x7170 [ubifs]
[<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0
[<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230
[<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0
[<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270
[<ffffffff83c14295>] do_syscall_64+0x35/0x80
[<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
The problem is that the ubifs_wbuf_init() returns an error in the
loop which in the alloc_wbufs(), then the wbuf->buf and wbuf->inodes
that were successfully alloced before are not freed.
Fix it by adding error hanging path in alloc_wbufs() which frees
the memory alloced before when ubifs_wbuf_init() returns an error. |
| A vulnerability has been found in Open5GS up to 2.7.6. Affected by this vulnerability is an unknown functionality of the component GTPv2 Bearer Response Handler. Such manipulation leads to denial of service. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The name of the patch is 98f76e98df35cd6a35e868aa62715db7f8141ac1. A patch should be applied to remediate this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()
If device_register() fails in snd_ac97_dev_register(), it should
call put_device() to give up reference, or the name allocated in
dev_set_name() is leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()
dev_set_name() in soundbus_add_one() allocates memory for name, it need be
freed when of_device_register() fails, call soundbus_dev_put() to give up
the reference that hold in device_initialize(), so that it can be freed in
kobject_cleanup() when the refcount hit to 0. And other resources are also
freed in i2sbus_release_dev(), so it can return 0 directly. |
| Svelte devalue is a JavaScript library that serializes values into strings when JSON.stringify isn't sufficient for the job. From 5.1.0 to 5.6.1, certain inputs can cause devalue.parse to consume excessive CPU time and/or memory, potentially leading to denial of service in systems that parse input from untrusted sources. This affects applications using devalue.parse on externally-supplied data. The root cause is the ArrayBuffer hydration expecting base64 encoded strings as input, but not checking the assumption before decoding the input. This vulnerability is fixed in 5.6.2. |
| Svelte devalue is a JavaScript library that serializes values into strings when JSON.stringify isn't sufficient for the job. From 5.3.0 to 5.6.1, certain inputs can cause devalue.parse to consume excessive CPU time and/or memory, potentially leading to denial of service in systems that parse input from untrusted sources. This affects applications using devalue.parse on externally-supplied data. The root cause is the typed array hydration expecting an ArrayBuffer as input, but not checking the assumption before creating the typed array. This vulnerability is fixed in 5.6.2. |
| Paessler PRTG Network Monitor before 25.4.114 allows Denial-of-Service (DoS) by an authenticated attacker via the Notification Contacts functionality. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()
Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure
page tables are properly synchronized when calling p*d_populate_kernel().
For 5-level paging, synchronization is performed via
pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so
synchronization is instead performed at the P4D level via
p4d_populate_kernel().
This fixes intermittent boot failures on systems using 4-level paging and
a large amount of persistent memory:
BUG: unable to handle page fault for address: ffffe70000000034
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:__init_single_page+0x9/0x6d
Call Trace:
<TASK>
__init_zone_device_page+0x17/0x5d
memmap_init_zone_device+0x154/0x1bb
pagemap_range+0x2e0/0x40f
memremap_pages+0x10b/0x2f0
devm_memremap_pages+0x1e/0x60
dev_dax_probe+0xce/0x2ec [device_dax]
dax_bus_probe+0x6d/0xc9
[... snip ...]
</TASK>
It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap
before sync_global_pgds() [1]:
BUG: unable to handle page fault for address: ffffeb3ff1200000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI
Tainted: [W]=WARN
RIP: 0010:vmemmap_set_pmd+0xff/0x230
<TASK>
vmemmap_populate_hugepages+0x176/0x180
vmemmap_populate+0x34/0x80
__populate_section_memmap+0x41/0x90
sparse_add_section+0x121/0x3e0
__add_pages+0xba/0x150
add_pages+0x1d/0x70
memremap_pages+0x3dc/0x810
devm_memremap_pages+0x1c/0x60
xe_devm_add+0x8b/0x100 [xe]
xe_tile_init_noalloc+0x6a/0x70 [xe]
xe_device_probe+0x48c/0x740 [xe]
[... snip ...] |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: fix memory leak in pad_compress_skb
If alloc_skb() fails in pad_compress_skb(), it returns NULL without
releasing the old skb. The caller does:
skb = pad_compress_skb(ppp, skb);
if (!skb)
goto drop;
drop:
kfree_skb(skb);
When pad_compress_skb() returns NULL, the reference to the old skb is
lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak.
Align pad_compress_skb() semantics with realloc(): only free the old
skb if allocation and compression succeed. At the call site, use the
new_skb variable so the original skb is not lost when pad_compress_skb()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: properly unshare skbs in ax25_kiss_rcv()
Bernard Pidoux reported a regression apparently caused by commit
c353e8983e0d ("net: introduce per netns packet chains").
skb->dev becomes NULL and we crash in __netif_receive_skb_core().
Before above commit, different kind of bugs or corruptions could happen
without a major crash.
But the root cause is that ax25_kiss_rcv() can queue/mangle input skb
without checking if this skb is shared or not.
Many thanks to Bernard Pidoux for his help, diagnosis and tests.
We had a similar issue years ago fixed with commit 7aaed57c5c28
("phonet: properly unshare skbs in phonet_rcv()"). |
