| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw in Node.js proxy tunnel error handling could expose proxy credentials in `ERR_PROXY_TUNNEL` error messages.
When proxy credentials are embedded in the proxy URL, they may be exposed through error handling paths and captured by logs, diagnostics, or other error consumers.
This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**. |
| A flaw in Node.js HTTP Agent can cause a client to accept as valid a response that is send before the client has sent the request.
This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**. |
| Impact:
undici's cookie parser in parseSetCookie percent-decodes cookie values via qsUnescape, turning encoded sequences like %0D%0A, %00, %3B, and %3D into their literal byte equivalents. RFC 6265 ยง5.4 does not specify any decoding and browsers do not decode either.
Applications that parse a Set-Cookie header and then forward the parsed value into a response header (proxies, middleware, SSR frameworks) become vulnerable to HTTP response header injection: an attacker-controlled upstream can inject arbitrary Set-Cookie, Location, or Cache-Control headers into the application's downstream response, enabling session fixation, open redirect, or cache poisoning.
Affected applications are those that use undici's cookie parsing (parseSetCookie, parseCookie, getSetCookies) and forward the parsed cookie value into a response header.
This was introduced in undici 7.0.0 via PR #3789.
Patches:
Upgrade to undici v6.26.0, v7.28.0 or v8.5.0.
Workarounds:
If upgrade is not immediately possible, do not forward values returned by parseSetCookie/parseCookie/getSetCookies directly into response headers; sanitize the value first to strip or reject CR, LF, NUL, ;, and = bytes. |
| Impact:
The undici WebSocket client enforces maxPayloadSize per-frame but does not enforce the cumulative size of fragmented uncompressed messages. A malicious WebSocket server can stream many small fragments that each pass per-frame validation but collectively exceed the configured limit, causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.
Affected applications are those using the undici WebSocket client (new WebSocket(...)) that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.
This is a regression specific to undici 8.1.0. The 6.25.0 line shipped the equivalent cumulative check from the start and is unaffected. The 7.x line never had the maxPayloadSize feature and is also unaffected.
Patches:
Upgrade to undici >= 8.5.0.
Workarounds:
No workaround is available. The fix must be applied through an upgrade. |
| Impact:
Undici's HTTP/1.1 client is vulnerable to response queue poisoning on reused keep-alive sockets. An attacker-controlled upstream server can inject an unsolicited HTTP/1.1 response onto an idle socket after a request completes. When the client dispatches the next request on that socket, it associates the injected response with the new request, causing responses to be delivered to the wrong requests.
This requires an attacker-controlled or compromised upstream HTTP/1.1 server and keep-alive connection reuse.
Patches:
Upgrade to undici v6.26.0, v7.28.0 or v8.5.0.
Workarounds:
Disable keep-alive connection reuse by setting keepAliveTimeout: 0 on the Client or Pool. |
| Impact:
Undici's cache interceptor incorrectly classifies some responses as cacheable when the upstream Cache-Control header uses whitespace-padded qualified private or no-cache field names such as private=" authorization" or no-cache="\tauthorization". The parser preserves the surrounding whitespace, so later comparisons against the literal authorization field name fail and the response is stored.
In shared-cache mode, this allows a response containing one user's authenticated data to be served from cache to a subsequent caller, including an unauthenticated caller, when both requests resolve to the same cache key.
Affected applications are those that explicitly enable the cache interceptor (interceptors.cache()) in shared mode, forward Authorization headers upstream, and receive cacheable responses with non-canonical qualified private or no-cache directives.
Patches:
Upgrade to undici v7.28.0 or v8.5.0.
Workarounds:
If upgrade is not immediately possible, disable shared-cache mode for traffic that includes Authorization headers, avoid caching responses to authenticated requests, or add Vary: Authorization upstream. |
| Impact:
When undici parses a Set-Cookie header, it accepts any SameSite attribute value that contains Strict, Lax, or None as a substring, rather than the case-insensitive exact match specified by RFC 6265. Non-spec values are silently mapped to one of the three standard tokens. For example, SameSite=NoneOfYourBusiness is parsed as None (the most permissive setting), and SameSite=StrictLax is parsed as Lax (a downgrade from Strict).
Affected applications are those that consume Set-Cookie headers from server responses (for example via undici's fetch or proxy code paths) and then forward or rely on the parsed sameSite attribute. A malicious or non-compliant server can coerce the consumer's view of a cookie's SameSite policy to a weaker value, silently degrading the SameSite enforcement the cookie is supposed to provide.
This was introduced in undici 5.15.0 when the cookies feature was added.
Patches:
Upgrade to undici v6.26.0, v7.28.0 or v8.5.0.
Workarounds:
After parsing a Set-Cookie header, validate that the resulting sameSite attribute is one of 'Strict', 'Lax', or 'None' (exact, case-insensitive) before forwarding or relying on it. |
| The DES and Triple DES ciphers, as used in the TLS, SSH, and IPSec protocols and other protocols and products, have a birthday bound of approximately four billion blocks, which makes it easier for remote attackers to obtain cleartext data via a birthday attack against a long-duration encrypted session, as demonstrated by an HTTPS session using Triple DES in CBC mode, aka a "Sweet32" attack. |
| The X.509 GeneralName type is a generic type for representing different types of names. One of those name types is known as EDIPartyName. OpenSSL provides a function GENERAL_NAME_cmp which compares different instances of a GENERAL_NAME to see if they are equal or not. This function behaves incorrectly when both GENERAL_NAMEs contain an EDIPARTYNAME. A NULL pointer dereference and a crash may occur leading to a possible denial of service attack. OpenSSL itself uses the GENERAL_NAME_cmp function for two purposes: 1) Comparing CRL distribution point names between an available CRL and a CRL distribution point embedded in an X509 certificate 2) When verifying that a timestamp response token signer matches the timestamp authority name (exposed via the API functions TS_RESP_verify_response and TS_RESP_verify_token) If an attacker can control both items being compared then that attacker could trigger a crash. For example if the attacker can trick a client or server into checking a malicious certificate against a malicious CRL then this may occur. Note that some applications automatically download CRLs based on a URL embedded in a certificate. This checking happens prior to the signatures on the certificate and CRL being verified. OpenSSL's s_server, s_client and verify tools have support for the "-crl_download" option which implements automatic CRL downloading and this attack has been demonstrated to work against those tools. Note that an unrelated bug means that affected versions of OpenSSL cannot parse or construct correct encodings of EDIPARTYNAME. However it is possible to construct a malformed EDIPARTYNAME that OpenSSL's parser will accept and hence trigger this attack. All OpenSSL 1.1.1 and 1.0.2 versions are affected by this issue. Other OpenSSL releases are out of support and have not been checked. Fixed in OpenSSL 1.1.1i (Affected 1.1.1-1.1.1h). Fixed in OpenSSL 1.0.2x (Affected 1.0.2-1.0.2w). |
| The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients consuming server certificates - TLS servers consuming client certificates - Hosting providers taking certificates or private keys from customers - Certificate authorities parsing certification requests from subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate which makes it slightly harder to trigger the infinite loop. However any operation which requires the public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-signed certificate to trigger the loop during verification of the certificate signature. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the 15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected 1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc). |
| A command inject vulnerability allows an attacker to perform command injection on Windows applications that indirectly depend on the CreateProcess function when the specific conditions are satisfied. |
| Undici is an HTTP/1.1 client for Node.js. Prior to 7.18.0 and 6.23.0, the number of links in the decompression chain is unbounded and the default maxHeaderSize allows a malicious server to insert thousands compression steps leading to high CPU usage and excessive memory allocation. This vulnerability is fixed in 7.18.0 and 6.23.0. |
| A flaw in Node.js TLS error handling allows remote attackers to crash or exhaust resources of a TLS server when `pskCallback` or `ALPNCallback` are in use. Synchronous exceptions thrown during these callbacks bypass standard TLS error handling paths (tlsClientError and error), causing either immediate process termination or silent file descriptor leaks that eventually lead to denial of service. Because these callbacks process attacker-controlled input during the TLS handshake, a remote client can repeatedly trigger the issue. This vulnerability affects TLS servers using PSK or ALPN callbacks across Node.js versions where these callbacks throw without being safely wrapped. |
| A flaw in Node.js's permission model allows Unix Domain Socket (UDS) connections to bypass network restrictions when `--permission` is enabled. Even without `--allow-net`, attacker-controlled inputs (such as URLs or socketPath options) can connect to arbitrary local sockets via net, tls, or undici/fetch. This breaks the intended security boundary of the permission model and enables access to privileged local services, potentially leading to privilege escalation, data exposure, or local code execution.
* The issue affects users of the Node.js permission model on version v25.
In the moment of this vulnerability, network permissions (`--allow-net`) are still in the experimental phase. |
| Calls to EVP_CipherUpdate, EVP_EncryptUpdate and EVP_DecryptUpdate may overflow the output length argument in some cases where the input length is close to the maximum permissable length for an integer on the platform. In such cases the return value from the function call will be 1 (indicating success), but the output length value will be negative. This could cause applications to behave incorrectly or crash. OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x). |
| A flaw in Node.js's buffer allocation logic can expose uninitialized memory when allocations are interrupted, when using the `vm` module with the timeout option. Under specific timing conditions, buffers allocated with `Buffer.alloc` and other `TypedArray` instances like `Uint8Array` may contain leftover data from previous operations, allowing in-process secrets like tokens or passwords to leak or causing data corruption. While exploitation typically requires precise timing or in-process code execution, it can become remotely exploitable when untrusted input influences workload and timeouts, leading to potential confidentiality and integrity impact. |
| A security flaw in Node.js allows a bypass of network import restrictions.
By embedding non-network imports in data URLs, an attacker can execute arbitrary code, compromising system security.
Verified on various platforms, the vulnerability is mitigated by forbidding data URLs in network imports.
Exploiting this flaw can violate network import security, posing a risk to developers and servers. |
| A vulnerability has been discovered in Node.js version 20, specifically within the experimental permission model. This flaw relates to improper handling of path traversal bypass when verifying file permissions.
Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js. |
| Certain build processes for libuv and Node.js for 32-bit systems, such as for the nodejs binary package through nodejs_20.19.0+dfsg-2_i386.deb for Debian GNU/Linux, have an inconsistent off_t size (e.g., building on i386 Debian always uses _FILE_OFFSET_BITS=64 for the libuv dynamic library, but uses the _FILE_OFFSET_BITS global system default of 32 for nodejs), leading to out-of-bounds access. NOTE: this is not a problem in the Node.js software itself. In particular, the Node.js website's download page does not offer prebuilt Node.js for Linux on i386. |
| The V8 release used in Node.js v24.0.0 has changed how string hashes are computed using rapidhash. This implementation re-introduces the HashDoS vulnerability as an attacker who can control the strings to be hashed can generate many hash collisions - an attacker can generate collisions even without knowing the hash-seed.
* This vulnerability affects Node.js v24.x users. |
