| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: coredump: Quiesce dump work on unregister
hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers
queue dump_rx without holding an hdev reference. Unregister leaves both
works live, so disconnecting during an active dump lets them access hdev
after hci_release_dev() frees it.
Shut down coredump processing during unregister. Close the producer gate
under dump_q.lock before disabling both works, then free the active buffer
and queued packets under hci_dev_lock. Serializing the gate with enqueue
prevents controller-specific workers from adding packets after the final
purge. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained
hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work
unconditionally. They can run from the L2CAP/SCO/ISO socket send path
while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN
racing with a socket write). Since that queue_work() is not chained
work from the tx_work worker itself, __queue_work() sees the queue
marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops
the work:
WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work
Call Trace:
queue_work_on
l2cap_chan_send
l2cap_sock_sendmsg
...
hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before
draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer()
check it before queuing. Route the tx_work producers through the
same guard via a shared hci_sched_tx() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: protect runlist updates with the runlist lock
ntfs_non_resident_attr_shrink() calls runlist helpers that require the
runlist write lock, but did not hold it while freeing clusters and
truncating the runlist. Serialize those operations and the resident
conversion with the runlist lock.
ntfs_attr_map_cluster() can merge a newly allocated run before updating
mapping pairs. If the update fails, free the clusters and restore both
the in-memory runlist and on-disk mapping pairs from a saved runlist.
Mark the volume in error if either rollback step fails. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat: unregister and release hooks on error
If nf_hook_entries_insert_raw() fails, the NAT hooks get never released,
resulting in a memleak.
Postpone setting nat_proto_net->nat_hook_ops when the hooks are
registered to simplify the error path to decide whether the nat hooks
need unwinding. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset the LED state when ifup fails
When the first interface comes up, the radio LED is turned on. This can
start the TPT trigger timer, which continues running.
But if bringing up the interface fails then the timer keeps running and
won't be stopped by anything, eventually it can be freed:
ODEBUG: free active (active state 0) object: ffff888127e12130 object type: timer_list hint: tpt_trig_timer+0x0/0x300 net/mac80211/led.c:145
WARNING: CPU: 0 PID: 5923 at lib/debugobjects.c:612 debug_print_object+0x1a2/0x2b0
debug_check_no_obj_freed+0x4b7/0x600 lib/debugobjects.c:1129
kfree+0x436/0x670 mm/slub.c:6818
ieee80211_led_exit+0x162/0x1c0 net/mac80211/led.c:210
ieee80211_unregister_hw+0x27e/0x3a0 net/mac80211/main.c:1706
rt2x00lib_remove_dev+0x55b/0x670
Undo the LED state in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset state when starting AP fails
ieee80211_start_ap() can set enable_beacon (and beacon_int) and fail
later, leaving it set forever. Scanning can then attempt to restore
beaconing on such an interface, leading to:
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:mac80211_hwsim_link_info_changed+0xca7/0xf00
Call Trace:
drv_link_info_changed+0x413/0x860 net/mac80211/driver-ops.c:495
ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427
ieee80211_offchannel_return+0x381/0x580 net/mac80211/offchannel.c:160
__ieee80211_scan_completed+0x993/0xe30 net/mac80211/scan.c:519
ieee80211_scan_work+0x472/0x2010 net/mac80211/scan.c:1193
cfg80211_wiphy_work+0x2b7/0x550 net/wireless/core.c:538
in hwsim. Also, cfg80211 then allows changing the interface type,
and the off-channel path getgs confused about beaconing as well,
leading to another warning:
WARNING: net/mac80211/driver-ops.c:468 at drv_link_info_changed+0x583/0x880
ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427
ieee80211_offchannel_stop_vifs+0x328/0x5c0 net/mac80211/offchannel.c:122
ieee80211_start_sw_scan net/mac80211/scan.c:583 [inline]
__ieee80211_start_scan+0xfb6/0x1af0 net/mac80211/scan.c:882
Reset the state on failures to always have it correct. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: wait for RCU readers before releasing dma_device
dma_issue_pending_all() walks the dma_device_list with
list_for_each_entry_rcu() under rcu_read_lock(). dma_device_release()
unlinks the device with list_del_rcu() and then calls
device->device_release() (which in many drivers, such as plx_dma.c,
directly calls kfree()).
Because there is no grace period between unlinking the device and
freeing it, concurrent RCU readers in dma_issue_pending_all() can
access the device after it has been freed.
The lockless walk originally relied on clients holding a dmaengine
reference to pin the provider module, and therefore the device, for as
long as they might traverse the list. Commit 8ad342a86359 ("dmaengine:
Add reference counting to dma_device struct") decoupled the dma_device
lifetime from the module reference, so the device can now be released
while a reader is still walking the list.
Add synchronize_rcu() before the device is freed, so RCU readers are
guaranteed to have finished. Keep it unconditional: providers that do
not implement device_release() free the device themselves once
dma_async_device_unregister() returns. This call will delay for a grace
period with dma_list_mutex held, which is safe and only teardown path is
delayed. |
| Confused deputy in UI in Google Chrome on on Android prior to 155.0.8059.39 allowed a local attacker to bypass system access restrictions into a privileged page via a co-installed app. (Chromium security severity: Medium) |
| Improper resource exposure in Extensions in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to obtain cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Information leak in Autofill in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) |
| Code injection in Extensions in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted Chrome extension. (Chromium security severity: Medium) |
| Incorrect authorization in PermissionElement in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to potentially bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Incorrect authorization in Input in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| UI misrepresentation in FileSystem in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Observable discrepancy in Paint in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Incorrect authorization in Accessibility in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| When password or public key authentication is used with the Windows port of wolfSSHd, the Windows logon token acquired for one authenticated connection is not released before a token is acquired for a subsequent connection, resulting in user login poisoning between connections. A less privileged user with a valid account on the server can exploit this to force a login as a more privileged user. The vulnerability was introduced with the initial Windows port of wolfSSHd in wolfSSH version 1.4.15 and affects all versions through 1.5.0. Non-Windows builds of wolfSSHd are not affected. |
| A security vulnerability has been identified in FlexNet Publisher lmadmin. The vulnerability exists in a SOAP handler, where a hardcoded authentication bypass could allow an unauthenticated user to obtain a privileged administrator session without providing valid credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: abort transaction on failure to update inode for hole punching and reflinking
If we fail to update the inode we error out without aborting the
transaction, which can result in a persistent inconsistency if after
the failure the transaction is committed, as we have dropped file
extent items from a range and either punched a hole or insert a new file
extent item for that range (for reflinks).
So add the missing transaction abort. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TSO header length truncation
stmmac_tso_xmit() stores the protocol header length returned by
stmmac_tso_header_size() in a u8. stmmac_tso_valid_packet() admits
headers up to 1023 bytes, so a header longer than 255 bytes wraps modulo
256 (486 becomes 230, 256 becomes 0).
A TCP over IPv6 socket carrying a few hundred bytes of sticky
destination/hop-by-hop options makes skb_tcp_all_headers() exceed 255
while staying below the 1023-byte limit, so such an skb reaches
stmmac_tso_xmit().
Widen proto_hdr_len to unsigned int, which is sufficient since the value
is bounded by the hardware limit, and adjust the debug print specifier
accordingly. |
