| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: reject frames without a transaction header
hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0]
before checking that the L2CAP SDU contains a transaction header. A
connected HIDP peer can send an empty basic-mode SDU and make both paths
use an uninitialized byte from skb tailroom.
KMSAN reports the use in hidp_session_run(), with the uninitialized value
originating in __alloc_skb() through vhci_write(). The control path
produces two reports and the interrupt path produces one.
The byte can also be controlled by a malformed lower-layer packet. If an
HCI ACL packet contains an L2CAP PDU with a declared zero-length payload
followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to
the declared PDU length before dispatch. The current HIDP path nevertheless
consumes the extra byte as HIDP_TRANS_HID_CONTROL |
HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this
change, the same packet is discarded and a subsequent feature report
request succeeds.
Pull the transaction header with skb_pull_data() and discard frames that
do not contain it. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject repeated SMB2 NEGOTIATE requests
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: restore write access when removing an entry
Registering an entry with the MISC_FMT_OPEN_FILE flag opens the
interpreter via open_exec() which denies write access to it for as
long as the entry exists. Removing the entry closes the interpreter
file via filp_close() but never restores write access, leaving the
inode's i_writecount permanently negative. Opening the interpreter
for writing keeps failing with ETXTBSY long after the entry is gone
until the inode is evicted from the inode cache.
Commit 90f601b497d7 ("binfmt_misc: restore write access before
closing files opened by open_exec()") fixed the same imbalance in the
error path of bm_register_write() but the actual removal path has
been leaking the write denial since the introduction of the flag.
Restore write access in put_binfmt_handler() before closing the
interpreter file. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: use exe_file_deny_write_access() for the interpreter clone
For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the
registered interpreter file and denies write access to the clone via
plain deny_write_access(). The clone is installed as
bprm->interpreter and later released by the exec machinery through
exe_file_allow_write_access() which skips the i_writecount increment
for files with FMODE_FSNOTIFY_HSM set.
The deny and allow side can therefore come to different conclusions
when pre-content watches are in play: if a pre-content watch is added
to the interpreter after registration every subsequent exec through
that entry takes a write denial on the clone that is never paired
with a write allowance, driving the interpreter inode's i_writecount
further down with each exec and leaving the interpreter unwritable
even after the entry and all its users are gone.
Take the write denial via exe_file_deny_write_access() so both sides
of the pairing base their decision on the same file mode, and
propagate failure instead of silently ignoring it: an interpreter
that is concurrently open for writing now fails the exec with
ETXTBSY, exactly like an interpreter freshly opened via open_exec()
would. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: don't leak the user namespace when the mount fails
bm_get_tree() takes a reference to the user namespace and hands it to
get_tree_keyed() as the sget key. sget_fc() moves that reference into
sb->s_fs_info and clears fc->s_fs_info, so from that point on the
superblock owns it and bm_free() doesn't see it anymore.
The superblock drops it in ->put_super(). But generic_shutdown_super()
only calls ->put_super() from inside the if (sb->s_root) branch, so
nothing releases it when bm_fill_super() fails:
- The kzalloc_obj() failure leaves s_root NULL and the whole branch is
skipped.
- A simple_fill_super() failure in the file loop leaves s_root set, but
s_op still points at simple_super_operations, which has no
->put_super(). bm_fill_super() installs s_ops only once
simple_fill_super() returned success, and installing it earlier
wouldn't help either because simple_fill_super() overwrites s_op.
Either way vfs_get_super() calls deactivate_locked_super() and the
reference is gone for good. binfmt_misc mounts are available in a user
namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so
an unprivileged caller under a tight memory cgroup can fail
simple_fill_super() on demand and leak one user namespace per attempt.
Drop the reference in ->kill_sb() instead, which runs unconditionally,
the same way nfsd and rpc_pipefs release their keyed s_fs_info.
That also stops ->put_super() from clearing s_fs_info while the
superblock is still on @fs_supers. generic_shutdown_super() leaves it
there on purpose so that sget_fc() keeps finding it until kill_sb() has
run, but a NULL s_fs_info makes test_keyed_super() miss it, so a
concurrent mount for the same user namespace skips the grab_super()
wait and creates a second superblock for a namespace that is still
being torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
net: pktgen: fix proc entry use-after-free
pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock.
pktgen_remove_device() removes the same entry before
_rem_dev_from_if_list() takes that lock.
This allows the following interleaving:
CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend)
if_lock(t)
proc_remove(pkt_dev->entry)
proc_remove(pkt_dev->entry)
pkt_dev->entry = proc_create_data(...)
if_unlock(t)
The kthread can pass the stale proc_dir_entry to proc_remove() after the
rename path has freed it. A reproducer with a widened race window reports:
BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80
Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67
Call Trace:
proc_remove+0x78/0x80
pktgen_remove_device.isra.0+0x11c/0x4c0
pktgen_thread_worker+0x1214/0x6bc0
kthread+0x2c6/0x3b0
Allocated by task 95:
__proc_create+0x204/0x790
proc_create_data+0x72/0xe0
pktgen_thread_write+0xd61/0x1510
Freed by task 28:
kmem_cache_free+0xcb/0x3d0
proc_free_inode+0x5b/0x80
rcu_core+0x50a/0x1850
The buggy address belongs to the object at ffff8881478fea00
which belongs to the cache proc_dir_entry of size 192
Move proc_remove() into the if_lock-protected list removal helper. Keep it
before list_del_rcu() to preserve the ordering required by add_device().
The rename path must then finish replacing the entry before removal, or
it observes that the device is no longer on the list. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: convert frag_list skbs before running XDP
A frag_list skb can reach veth with data_len set but nr_frags zero.
veth_convert_skb_to_xdp_buff() only converts skbs that are shared,
locked, have frags[], or do not have enough headroom. It later uses
skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and
xdp_frags_size.
That exposes frag_list data to XDP as if it were stored in frags[], but
frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment
metadata, walk an empty fragment entry, and crash in memcpy() from
__xsk_rcv().
Route non-linear skbs through skb_pp_cow_data() before exposing them to
XDP, and only advertise XDP frags when the resulting skb has frags[].
skb_copy_bits() already handles frag_list input, and skb_pp_cow_data()
builds frags[] output with skb_add_rx_frag(), which is the
representation XDP multi-buffer expects. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use pskb_network_may_pull() for transmit path header pulls
In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was
being called to verify the availability of network layer headers (ARP, IPv6/ND,
IP/IPv6 MDB keys).
However, during transmit skb->data points to the MAC header, so skb_network_offset(skb)
is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data
rather than skb_network_offset(skb) + len, which can leave part of the network header
in non-linear frags.
Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly
account for the MAC header offset. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write
resp_report_zones() sizes the reply buffer from the CDB allocation
length. The v3 fix rounds alloc_len up with ALIGN() before deriving the
descriptor count:
rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) -
RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD);
arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1);
For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to
0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit
and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which
passes the !arr check, and desc = arr + 64 is then dereferenced in the
loop -> out-of-bounds write / panic.
Clamp rep_max_zones to devip->nr_zones. The loop already stops at
sdebug_capacity (after nr_zones zones), so a report can never hold more
than nr_zones descriptors; the clamp does not change the report, it only
bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device
property that can never reach 0x100000000. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: fix pptable use-after-free
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
(cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Fix race condition and ordering in port unregistration
A synchronization issue exists during port unregistration where pending
partner work items can race against workqueue destruction, leading to
use-after-free conditions:
cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__queue_work+0x83/0x4a0
Call Trace:
<IRQ>
__cfi_delayed_work_timer_fn+0x10/0x10
run_timer_softirq+0x3b6/0xbd0
sched_clock_cpu+0xc/0x110
irq_exit_rcu+0x18d/0x330
fred_sysvec_apic_timer_interrupt+0x5e/0x80
Fix this by ensuring strict ordering and proper serialization during
teardown:
1. Move ucsi_unregister_partner() to the beginning of the teardown
sequence and protect it under the connector mutex lock.
2. Ensure all pending partner tasks are explicitly flushed and finished
before the workqueue is destroyed.
3. Switch from mod_delayed_work() to a cancel_delayed_work() and
queue_delayed_work() sequence. This guarantees that items currently marked
as pending won't be scheduled an additional time, preventing a double
release of resources which leads to the following crash:
Oops: general protection fault, probably for non-canonical address
0xdead000000000122: 0000 [#1] SMP NOPTI
Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker
RIP: 0010:ucsi_poll_worker+0x65/0x1e0
Call Trace:
<TASK>
process_scheduled_works+0x218/0x6d0
worker_thread+0x188/0x3f0
__cfi_worker_thread+0x10/0x10
kthread+0x226/0x2a0
To ensure these rules are applied identically across both the normal
teardown and the ucsi_init() error paths, consolidate the cleanup logic
into a new helper, ucsi_unregister_port(). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: serialize kernel accept preallocation with socket teardown
rxrpc_kernel_charge_accept() reads rx->backlog without any
socket/backlog synchronization and passes that raw pointer into
rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc()
sets rx->backlog = NULL and frees the backlog rings, so a kernel
preallocation worker can keep using a freed struct rxrpc_backlog
while updating *_backlog_head/tail and array slots.
Serialize the state check and backlog lookup with the socket lock,
and reject kernel preallocation once teardown has disabled
listening or discarded the service backlog. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: fix refcount leak in mlxsw_sp_port_lag_join()
When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join()
returns an error without releasing the lag reference obtained by
the earlier mlxsw_sp_lag_get(). All other error paths in the
function jump to the cleanup label that ends with
mlxsw_sp_lag_put(), so this is a single missed release.
Fix the leak by replacing the bare 'return err' with a goto to the
existing error cleanup label, which will drop the reference safely. |
| In the Linux kernel, the following vulnerability has been resolved:
VDUSE: avoid leaking information to userspace
The bounceing is not necessarily page aligned, so current VDUSE can
leak kernel information through mapping bounce pages to
userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking
information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: restrict socket queue dumps in enqueue tracepoints
tipc_sk_enqueue() runs with sk->sk_lock.slock held while the socket is
owned by user context. The spinlock protects the backlog queue in this
path, but it does not serialize against the socket owner consuming or
purging sk_receive_queue.
KASAN reported:
CPU: 14 UID: 0 PID: 1050 Comm: tipc3 Not tainted 7.1.0-rc6+ #126 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0 lib/dump_stack.c:123
print_report+0xce/0x5b0 mm/kasan/report.c:482
kasan_report+0xc6/0x100 mm/kasan/report.c:597
__asan_report_load4_noabort+0x14/0x30 mm/kasan/report_generic.c:380
tipc_skb_dump+0x1327/0x16f0 net/tipc/trace.c:73
tipc_list_dump+0x208/0x2e0 net/tipc/trace.c:187
tipc_sk_dump+0xaf6/0xd60 net/tipc/socket.c:3996
trace_event_raw_event_tipc_sk_class+0x312/0x5a0 net/tipc/trace.h:188
tipc_sk_rcv+0xb1d/0x1d50 net/tipc/socket.c:2497
tipc_node_xmit+0x1c3/0x1440 net/tipc/node.c:1689
__tipc_sendmsg+0x97a/0x1440 net/tipc/socket.c:1512
tipc_sendmsg+0x52/0x80 net/tipc/socket.c:1400
sock_sendmsg+0x2f6/0x3e0 net/socket.c:825
splice_to_socket+0x7f9/0x1010 fs/splice.c:884
do_splice+0xe21/0x2330 fs/splice.c:936
__do_splice+0x153/0x260 fs/splice.c:1431
__x64_sys_splice+0x150/0x230 fs/splice.c:1616
x64_sys_call+0xeb5/0x2790 arch/x86/entry/syscall_64.c:41
do_syscall_64+0xf3/0x620 arch/x86/entry/syscall_64.c:63
entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:130
RIP: 0033:0x71624e8aafe2
Code: 08 0f 85 71 3a ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66
RSP: 002b:0000716157ffed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000113
RAX: ffffffffffffffda RBX: 0000716157fff6c0 RCX: 000071624e8aafe2
RDX: 000000000000005f RSI: 0000000000000000 RDI: 0000000000000066
RBP: 0000716157ffed90 R08: 0000000000008000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffff00
R13: 0000000000000021 R14: 0000000000000000 R15: 00007fff89799c40
</TASK>
The TIPC_DUMP_ALL tracepoints in tipc_sk_enqueue() also dump
sk_receive_queue and can therefore dereference skbs that the socket
owner has already dequeued or freed. Restrict these dumps to
TIPC_DUMP_SK_BKLGQ, which matches the queue protected by the held
spinlock.
Keep the change limited to the enqueue path, where the unsafe queue dump
is reachable while the socket is owned by user context. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get
The ipc_control_data buffer is allocated as kzalloc(max_size), where
max_size covers the entire struct sof_ipc_ctrl_data including its
flexible array payload. However, the bounds checks in bytes_ext_put
and _bytes_ext_get compared user data lengths against max_size
directly, ignoring that cdata->data sits at an offset of
sizeof(struct sof_ipc_ctrl_data) bytes into the allocation.
This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past
the end of the heap buffer from unprivileged userspace via the ALSA TLV
kcontrol interface, and similarly allowed over-reading adjacent heap
data on the get path.
Fix all bounds checks to subtract sizeof(*cdata) from max_size so they
reflect the actual space available at the cdata->data offset. Also fix
the error-path restore in bytes_ext_put which wrote to cdata->data
instead of cdata, causing the same overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8192: Check runtime resume during probe
The MT8192 AFE probe enables runtime PM temporarily while reinitializing
the regmap cache from hardware, but it uses pm_runtime_get_sync()
without checking the return value. If runtime resume fails, probe keeps
going without the device necessarily being accessible, and
pm_runtime_get_sync() may leave the PM usage count incremented.
The regmap_reinit_cache() failure path also returns before dropping the
temporary PM reference and before clearing pm_runtime_bypass_reg_ctl.
Use pm_runtime_resume_and_get() so resume failures do not leak a usage
count, and clear the temporary bypass flag after dropping the probe PM
reference on all regmap_reinit_cache() outcomes. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: validate skb_dst() before accessing it
tc ingress and openvswitch do not guarantee routing information to be
available. These subsystems use the conntrack helper infrastructure, and
the SIP helper relies on the skb_dst() to be present if
sip_external_media is set to 1 (which is disabled by default as a module
parameter).
This effectively disables the sip_external_media toggle for these
subsystems without resulting in a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: don't leak bad clone into future transaction
On memory allocation failure the cloned nft_pipapo_match can enter a bad
state:
- some fields can have their lookup tables resized while others did
not
- bits might have been toggled
- scratch map can be undersized which also means m->bsize_max can be
lower than what is required
This means that the next insertion in the same batch can trigger
out-of-bounds writes.
Furthermore, a failure in the first can result in the bad clone to
leak into the next transaction because the abort callback is never
executed in this case (the upper layer saw an error and no attempt to
allocate a transactional request was made).
Record a state for the nft_pipapo_match structure:
- NEW (pristine clone)
- MOD (modified clone with good state)
- ERR (potentially bogus content)
Then make it so that deletes and insertions fail when the clone
entered ERR state.
In case the very first insert attempt results in an error, free the
clone right away. |
