| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: reject DX_BIND_QUERY without a DX context
vmw_cmd_dx_bind_query() unconditionally dereferences
sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer
dereference from any render-node fd by submitting an execbuf with
dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY
opcode in the command stream: dx_ctx_node is left NULL and the kernel
oopses on the assignment. The same NULL is then re-read in
vmw_resources_reserve() via vmw_context_get_dx_query_mob().
All sibling DX handlers fail-close on a missing dx_ctx_node using
VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up
front before any relocation state is published. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure
Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while
still leaving the rest of the driver in a state that calls
vmw_vkms_cleanup() at module unload:
1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or
returning an oversized buffer -- the common case on hosts
without a VBLANK guestinfo entry -- early-returned before the
workqueue allocation.
2. alloc_ordered_workqueue() returning NULL on memory pressure.
vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which
dereferences wq->name and panics.
Fix the first case by removing the early return: vmw->vkms_enabled
is already false on the rpci-failure path so no work will ever be
queued, and allocating the workqueue unconditionally keeps the
control flow simple. Fix the second case by guarding the cleanup
with a NULL check, since alloc_ordered_workqueue() can still fail
under low memory. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: fix NULL pointer dereference in afs_get_tree()
afs_alloc_sbi() uses kzalloc for memory allocation. And, if
ctx->dyn_root is not null, as->cell and as->volume are null.
In trace_afs_get_tree() they are dereferenced.
KASAN error message:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 2 PID: 18478 Comm: syz-executor.7 Not tainted 5.10.246-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1
04/01/2014
RIP: 0010:perf_trace_afs_get_tree+0x1d9/0x550
include/trace/events/afs.h:1365
Call Trace:
trace_afs_get_tree include/trace/events/afs.h:1365 [inline]
afs_get_tree+0x922/0x1350 fs/afs/super.c:599
vfs_get_tree+0x8e/0x300 fs/super.c:1572
do_new_mount fs/namespace.c:3011 [inline]
path_mount+0x14a5/0x2220 fs/namespace.c:3341
do_mount fs/namespace.c:3354 [inline]
__do_sys_mount fs/namespace.c:3562 [inline]
__se_sys_mount fs/namespace.c:3539 [inline]
__x64_sys_mount+0x283/0x300 fs/namespace.c:3539
do_syscall_64+0x33/0x50 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: inno-hdmi: Switch to drmm_kzalloc()
Driver makes use of drmm_encoder_init() to initialize the encoder and
automatically handle the cleanup by registering drm_encoder_cleanup()
with drmm_add_action().
However, the internal structure containing the encoder part gets
allocated with devm_kzalloc(), which happens while component_bind_all()
is being called from Rockchip DRM driver. The component framework
further ensures it is deallocated as part of releasing all the resources
claimed during bind, which is triggered from component_unbind_all().
When the reference to the DRM device gets eventually dropped via
drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release()
attempts to access the now released encoder structure, leading to
use-after-free.
Ensure driver's internal structure is still reachable on encoder cleanup
by switching from a device-managed allocation to a drm-managed one. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: dw_dp: Switch to drmm_kzalloc()
Driver makes use of drmm_encoder_init() to initialize the encoder and
automatically handle the cleanup by registering drm_encoder_cleanup()
with drmm_add_action().
However, the internal structure containing the encoder part gets
allocated with devm_kzalloc(), which happens while component_bind_all()
is being called from Rockchip DRM driver. The component framework
further ensures it is deallocated as part of releasing all the resources
claimed during bind, which is triggered from component_unbind_all().
When the reference to the DRM device gets eventually dropped via
drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release()
attempts to access the now released encoder structure, leading to
use-after-free.
Ensure driver's internal structure is still reachable on encoder cleanup
by switching from a device-managed allocation to a drm-managed one. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-fence: Fix potential tracepoint null pointer dereferences
Trace_dma_fence_signaled, trace_dma_fence_wait_end and
trace_dma_fence_destroy can all currently dereference a null fence->ops
pointer after it has been reset on fence signalling.
Lets use the safe string getters for most tracepoints to avoid this class
of a problem, while for the signal tracepoint we move it to before ops are
cleared to avoid losing the driver and timeline name information. Apart
from moving it we also need to add a new tracepoint class to bypass the
safe name getters since the signaled bit is already set.
For dma_fence_init we also need to use the new tracepoint class since the
rcu read lock is not held there, and we can do the same for the enable
signaling since there we are certain the fence cannot be signaled while
we are holding the lock and have even validated the fence->ops. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: atcspi200: fix use-after-free when driver unbind
DMA resource is initialized after SPI controller registration. So
when driver unbind, this can trigger a use-after-free when DMA is
torn down while the controller is still alive and triggers DMA transfers. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: Remove the duplicate attr inode dirty marking action
Syzbot reported a null-ptr-deref in [1].
If the attributes file is not loaded during system mount, a trigger
occurs [1] when setxattr is executed in userspace.
Remove the first mark attr inode dirty operation.
[1]
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
Call Trace:
hfsplus_setxattr+0x124/0x340 fs/hfsplus/xattr.c:555
hfsplus_trusted_setxattr+0x40/0x60 fs/hfsplus/xattr_trusted.c:30
__vfs_setxattr+0x43c/0x480 fs/xattr.c:218
__vfs_setxattr_noperm+0x12d/0x660 fs/xattr.c:252
vfs_setxattr+0x163/0x360 fs/xattr.c:339
do_setxattr fs/xattr.c:654 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - fix blocking and non-blocking rng logic
The blocking and non-blocking paths were failing to provide valid entropy
due to improper buffer management. Reading the buffer starting from byte 1,
only fetch the 32 bytes of random data from the return message.
Tested on an Atmel SHA204A device.
Before (here for blocking), tests showed repeatedly reading reduced bytes.
$ head -c 32 /dev/hwrng | hexdump -C
00000000 02 28 85 b3 47 40 f2 ee 00 00 00 00 00 00 00 00 |.(..G@..........|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020
After, the result will be similar to the following:
$ head -c 32 /dev/hwrng | hexdump -C
00000000 5a fc 3f 13 14 68 fe 06 68 0a bd 04 83 6e 09 69 |Z.?..h..h....n.i|
00000010 75 ff cf 87 10 84 3b c9 c1 df ae eb 45 53 4c c3 |u.....;.....ESL.|
00000020 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix crash in bpf_[set|remove]_dentry_xattr for negative dentries
bpf_set_dentry_xattr and bpf_remove_dentry_xattr BPF kfuncs attempt to
lock the inode of the supplied dentry without checking if it is
NULL. If a negative dentry is passed (e.g. from
security_inode_create), d_inode(dentry) returns NULL, and
inode_lock(inode) will cause a NULL pointer dereference.
Trivially fix this by adding a NULL check for inode before attempting
to lock it, returning -EINVAL if it is NULL.
Additionally, drop WARN_ON(!inode) in bpf_xattr_read_permission() and
bpf_xattr_write_permission(). These warnings could be triggered by
passing a negative dentry to bpf_get_dentry_xattr() or the _locked
variants of the xattr kfuncs, potentially causing a Denial of Service
on systems with panic_on_warn enabled. Instead, simply return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix devx subscribe-event unwind NULL dereference
MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list
before initializing the fields used by the shared error path.
If eventfd_ctx_fdget() then fails, the unwind path dereferences
event_sub->ev_file in uverbs_uobject_put() and calls
subscribe_event_xa_dealloc() with an unset xa_key_level1.
subscribe_event_xa_alloc() creates the XA entry exactly once for a given
key_level1, on the first occurrence of that key. The unwind path must
therefore call subscribe_event_xa_dealloc() exactly once for it as well.
Enforce that by adding devx_key_in_sub_list() and calling
subscribe_event_xa_dealloc() only when the last matching pending entry is
being cleaned up. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/kmem: account for partial discontiguous resource upon removal
When dev_dax_kmem_probe() partially succeeds (at least one range is
mapped) but a subsequent range fails request_mem_region() or
add_memory_driver_managed(), the probe silently continues, ultimately
returning success, but with the corresponding range resource NULL'ed out.
dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if
the underlying resource exists. When remove_memory() is called later, it
returns 0 because the memory was never added which causes
dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can
be removed and attempts cleanup on a NULL pointer.
Fix this by skipping these ranges altogether, noting that these cases are
considered success, such that the cleanup is still reached when all
actually-added ranges are successfully removed. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix deadlock in read error recovery path
raid1d and raid10d may resubmit a split md cloned bio while handling
a read error. In this case, resubmitting the bio can lead to a deadlock
if the array is suspended before md_handle_request() acquires an
active_io reference via percpu_ref_tryget_live().
Since the cloned bio already holds an active_io reference,
trying to acquire another reference via percpu_ref_tryget_live()
can lead to a deadlock while the array is suspended.
Fix this by using percpu_ref_get() for md cloned bios. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix bio accounting for split md cloned bios
Use md_cloned_bio() to control bio accounting instead of relying
on r1bio_existed in raid1 or the io_accounting flag in raid10.
The previous logic does not reliably reflect whether a bio is an
md cloned bio. When a failed bio is split and resubmitted via
bio_submit_split_bioset() on the error path, this can lead to either
double accounting for md cloned bios, or missing accounting for bios
returned from bio_submit_split_bioset()
Fix this by using md_cloned_bio() to detect md cloned bios and
skip accounting accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic()
In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to
ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the
NWIFI header length is invalid, causing the function to abort early with
-EINVAL.
When this happens, the error propagates to
ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it
to NULL. As a result, the corresponding MSDU is no longer referenced
by the defragmentation path and is never freed.
This leads to a memory leak for the affected MSDU on this error path.
Proper cleanup is required to ensure the MSDU is released when header
validation fails during TKIP MIC verification.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix NULL deref in change_sta_links for unready link
_ieee80211_set_active_links() calls _ieee80211_link_use_channel() for
each newly-added link and WARN_ON_ONCE()s if it fails. The call uses
assign_on_failure=true, which allows mac80211 to continue despite
driver failures, but when a mac80211-level channel validation fails
(e.g., combinations check, DFS, or no available radio),
drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create()
is only called from that path, arvif->is_created remains false and
arvif->ar remains NULL for the failed link.
The subsequent drv_change_sta_links() call reaches
ath12k_mac_op_change_sta_links(), which allocates an arsta and sets
ahsta->links_map |= BIT(link_id) for the broken link before checking
whether the link is ready. When the vdev was never created, only
station_add() is skipped, but the link remains in links_map.
Any subsequent operation iterating links_map and dereferencing arvif->ar
without a NULL check will crash. Two observed examples are NULL deref in
ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key()
when wpa_supplicant installs PTK keys.
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
Call trace:
ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k]
drv_sta_state+0x100/0xbd8 [mac80211]
__sta_info_destroy_part2+0x148/0x178 [mac80211]
ieee80211_set_disassoc+0x500/0x678 [mac80211]
BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
Call trace:
ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
drv_set_key+0x70/0x100 [mac80211]
ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211]
ieee80211_add_key+0x16c/0x2ac [mac80211]
nl80211_new_key+0x138/0x280 [cfg80211]
Fix this by checking arvif->is_created before calling
ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from
entering links_map, so all subsequent operations iterating the bitmap
are protected. The reliability of arvif->is_created across all error
paths is ensured by the preceding patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: fix ignored return value of generic_write_sync()
Fix ext2_dio_write_iter() to propagate the error returned by
generic_write_sync() instead of silently discarding it, which could
cause write(2) to return success to userspace on O_SYNC/O_DSYNC files
even when the sync failed.
The correct pattern, already used in ext2_dax_write_iter() in the same
file and in ext4, xfs, f2fs among others, is:
if (ret > 0)
ret = generic_write_sync(iocb, ret);
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[JK: Reflect also filemap_write_and_wait() return value] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject exclusive maps for bpf_map_elem iterators
Exclusive maps (aka excl_prog_hash) are meant to be reachable only
from the single program whose hash matches. This is enforced by
check_map_prog_compatibility() when the map is referenced from a
program such as signed BPF loaders.
A bpf_map_elem iterator, however, binds its target map at attach
time in bpf_iter_attach_map() instead of referencing it from the
program, so the exclusivity check is never reached. On top of that,
the iterator exposes the map value as a writable buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix fast commit wait/wake bit mapping on 64-bit
On 64-bit, ext4 dynamic inode states live in the upper half of i_flags,
and ext4_test_inode_state() applies the corresponding +32 offset.
The fast-commit wait and wake paths open-coded the wait key with the raw
EXT4_STATE_* value. Add small helpers for the state wait word and bit,
and use them for the FC_COMMITTING and FC_FLUSHING_DATA waits so the wait
key follows the same mapping as the state helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: always resume_all after suspend_all
Need to restore any good queues even if the suspend_all
failed for some. Always run remove_queue as that will
schedule a GPU reset is removing the queue fails.
v2: move resume_all after remove |
