| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in GL.iNet A1300, AX1800, AXT1800, BE1400, BE3600, BE6500, BE9300, BE10000, E5800, MT2500, MT3000, MT3600BE, MT5000, MT6000, X2000, X3000 and XE3000 up to 4.8.x. Affected by this vulnerability is the function COPY/MOVE of the component WebDAV Service. Such manipulation leads to authorization bypass. It is possible to launch the attack remotely. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| A vulnerability was determined in Webkul Bagisto up to 2.4.4. This affects an unknown part of the file /customer/account/rma/send-message of the component RMA Message Handler. This manipulation of the argument Message causes cross site scripting. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: skip global block reserve accounting for rescue mounts
[BUG]
Mounting with rescue=ibadroots after corrupting the block group tree
root triggers a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000100
RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs]
Call Trace:
fill_dummy_bgs+0xd4/0x120 [btrfs]
open_ctree+0xc6e/0x1ca0 [btrfs]
btrfs_get_tree+0x50d/0xa40 [btrfs]
The same crash occurs with a corrupted raid stripe tree root, via
btrfs_read_block_groups() instead of fill_dummy_bgs().
[CAUSE]
With rescue=ibadroots, btrfs_read_roots() allows the mount to continue
when either root cannot be read, leaving the corresponding root pointer
NULL while its on-disk feature bit remains set.
btrfs_update_global_block_rsv() then dereferences the missing root based
on the feature bit alone.
[FIX]
Rescue mounts are fully read-only and cannot start transactions, so the
global reserve is never consumed. Under btrfs_is_full_ro(), mark the
reserve as full and return before performing the accounting.
And since we need to check if the fs is mount fully RO, export
fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h.
[ Squash the fs_is_full_ro() export commit into this one. ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix leaking sk after socket release
iso_sock_kill() tests !sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket ||
sock_flag(sk, SOCK_DEAD) for early return, but this is always true since
sock_orphan(sk) sets SOCK_DEAD, so the sk reference released by socket
always leaks, iso_sock_destruct is never called.
The socket reference also leaks when __iso_sock_close() does not set
SOCK_ZAPPED, since iso_conn_del() does not call iso_sock_kill() after
zapping.
Fix by replacing SOCK_DEAD by BT_SK_KILLED flag that is not used for
something else, and lock_sock to ensure iso_sock_kill() puts sk only
after socket release only once. Release and iso_conn_del may run
concurrently. Call iso_sock_kill() from iso_conn_del() to clean sk up
after zapping.
Remove call to iso_sock_kill() from iso_sock_close(), as it's generally
no-op there. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Fix division by zero in initialize_timer()
A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set
the backing snd_timer's hardware resolution to an arbitrary 64-bit value
via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero.
When such a timer is bound to a sequencer queue, initialize_timer()
computes the tick period as
tmr->ticks = 1000000000 / (r * freq);
where r is that user-controlled resolution and freq is the sequencer
update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250).
A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for
any even freq, including DEFAULT_FREQUENCY (1000), so the division faults
with a divide-by-zero.
The division runs under tmr->lock with interrupts disabled, so the oops
leaves the spinlock held and hangs the CPU. It is reachable by an
unprivileged user with access to /dev/snd/timer and /dev/snd/seq.
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+
RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0
snd_seq_timer_start+0x15e/0x2b0
snd_seq_control_queue+0x56f/0xba0
snd_seq_write+0x3e0/0x730
Reject an overflowing product with check_mul_overflow() and fall back to
a single tick, which also avoids feeding a wrapped-but-nonzero divisor
(e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small
value) into the period computation. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix use-after-free in ump_to_endpoint()
create_midi2_ump() registers a card-owned snd_ump_endpoint and stores a
back-pointer to its per-interface snd_usb_midi2_ump object in
ump->private_data, but it never installs an ump->private_free hook and
never clears that pointer.
If a later step of snd_usb_midi_v2_create() fails, its error path calls
free_all_midi2_umps(), which kfree()s the snd_usb_midi2_ump object while
the already-registered endpoint keeps pointing at it. The created
/dev/snd/umpC*D* node stays exposed, so the first operation of any UMP
open, ump_to_endpoint(), dereferences the dangling ump->private_data and
reads rmidi->eps[dir] out of freed memory.
A malicious USB MIDI 2.0 device that makes creation fail after the
endpoint is registered can thus trigger a slab use-after-free read on a
subsequent open of the UMP node.
Clear the endpoint's back-pointer before freeing the object, and let
ump_to_endpoint() tolerate a NULL private_data so the open/close/trigger
callbacks fail cleanly (their callers already handle a NULL endpoint)
instead of dereferencing a stale pointer.
Discovered by XBOW, triaged by Baul Lee <[email protected]> |
| In the Linux kernel, the following vulnerability has been resolved:
of/address: Fix NULL bus dereference in of_pci_range_parser_one()
The bus matching rework made of_match_bus() return NULL for nodes with
ranges/dma-ranges but no local #address-cells. parser_init() stored that
NULL bus, and the range iterator later dereferenced it.
Reject such nodes in parser_init(), leaving an explicit empty
iterator for callers that ignore the init return, and make
of_dma_get_max_cpu_address() honour the init failure so a rejected node
cannot clamp the DMA limit. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: reject DX_BIND_QUERY without a DX context
vmw_cmd_dx_bind_query() unconditionally dereferences
sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer
dereference from any render-node fd by submitting an execbuf with
dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY
opcode in the command stream: dx_ctx_node is left NULL and the kernel
oopses on the assignment. The same NULL is then re-read in
vmw_resources_reserve() via vmw_context_get_dx_query_mob().
All sibling DX handlers fail-close on a missing dx_ctx_node using
VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up
front before any relocation state is published. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure
Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while
still leaving the rest of the driver in a state that calls
vmw_vkms_cleanup() at module unload:
1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or
returning an oversized buffer -- the common case on hosts
without a VBLANK guestinfo entry -- early-returned before the
workqueue allocation.
2. alloc_ordered_workqueue() returning NULL on memory pressure.
vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which
dereferences wq->name and panics.
Fix the first case by removing the early return: vmw->vkms_enabled
is already false on the rpci-failure path so no work will ever be
queued, and allocating the workqueue unconditionally keeps the
control flow simple. Fix the second case by guarding the cleanup
with a NULL check, since alloc_ordered_workqueue() can still fail
under low memory. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Fix race condition and ordering in port unregistration
A synchronization issue exists during port unregistration where pending
partner work items can race against workqueue destruction, leading to
use-after-free conditions:
cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__queue_work+0x83/0x4a0
Call Trace:
<IRQ>
__cfi_delayed_work_timer_fn+0x10/0x10
run_timer_softirq+0x3b6/0xbd0
sched_clock_cpu+0xc/0x110
irq_exit_rcu+0x18d/0x330
fred_sysvec_apic_timer_interrupt+0x5e/0x80
Fix this by ensuring strict ordering and proper serialization during
teardown:
1. Move ucsi_unregister_partner() to the beginning of the teardown
sequence and protect it under the connector mutex lock.
2. Ensure all pending partner tasks are explicitly flushed and finished
before the workqueue is destroyed.
3. Switch from mod_delayed_work() to a cancel_delayed_work() and
queue_delayed_work() sequence. This guarantees that items currently marked
as pending won't be scheduled an additional time, preventing a double
release of resources which leads to the following crash:
Oops: general protection fault, probably for non-canonical address
0xdead000000000122: 0000 [#1] SMP NOPTI
Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker
RIP: 0010:ucsi_poll_worker+0x65/0x1e0
Call Trace:
<TASK>
process_scheduled_works+0x218/0x6d0
worker_thread+0x188/0x3f0
__cfi_worker_thread+0x10/0x10
kthread+0x226/0x2a0
To ensure these rules are applied identically across both the normal
teardown and the ucsi_init() error paths, consolidate the cleanup logic
into a new helper, ucsi_unregister_port(). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: fix NULL pointer dereference in afs_get_tree()
afs_alloc_sbi() uses kzalloc for memory allocation. And, if
ctx->dyn_root is not null, as->cell and as->volume are null.
In trace_afs_get_tree() they are dereferenced.
KASAN error message:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 2 PID: 18478 Comm: syz-executor.7 Not tainted 5.10.246-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1
04/01/2014
RIP: 0010:perf_trace_afs_get_tree+0x1d9/0x550
include/trace/events/afs.h:1365
Call Trace:
trace_afs_get_tree include/trace/events/afs.h:1365 [inline]
afs_get_tree+0x922/0x1350 fs/afs/super.c:599
vfs_get_tree+0x8e/0x300 fs/super.c:1572
do_new_mount fs/namespace.c:3011 [inline]
path_mount+0x14a5/0x2220 fs/namespace.c:3341
do_mount fs/namespace.c:3354 [inline]
__do_sys_mount fs/namespace.c:3562 [inline]
__se_sys_mount fs/namespace.c:3539 [inline]
__x64_sys_mount+0x283/0x300 fs/namespace.c:3539
do_syscall_64+0x33/0x50 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix leak when pinning ubuf pages
When pin_user_pages_fast() returns fewer pages than requested, the pages
that were successfully pinned are not released, leading to a leak.
Fix this by unpinning any partially pinned pages before returning failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: inno-hdmi: Switch to drmm_kzalloc()
Driver makes use of drmm_encoder_init() to initialize the encoder and
automatically handle the cleanup by registering drm_encoder_cleanup()
with drmm_add_action().
However, the internal structure containing the encoder part gets
allocated with devm_kzalloc(), which happens while component_bind_all()
is being called from Rockchip DRM driver. The component framework
further ensures it is deallocated as part of releasing all the resources
claimed during bind, which is triggered from component_unbind_all().
When the reference to the DRM device gets eventually dropped via
drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release()
attempts to access the now released encoder structure, leading to
use-after-free.
Ensure driver's internal structure is still reachable on encoder cleanup
by switching from a device-managed allocation to a drm-managed one. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: dw_dp: Switch to drmm_kzalloc()
Driver makes use of drmm_encoder_init() to initialize the encoder and
automatically handle the cleanup by registering drm_encoder_cleanup()
with drmm_add_action().
However, the internal structure containing the encoder part gets
allocated with devm_kzalloc(), which happens while component_bind_all()
is being called from Rockchip DRM driver. The component framework
further ensures it is deallocated as part of releasing all the resources
claimed during bind, which is triggered from component_unbind_all().
When the reference to the DRM device gets eventually dropped via
drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release()
attempts to access the now released encoder structure, leading to
use-after-free.
Ensure driver's internal structure is still reachable on encoder cleanup
by switching from a device-managed allocation to a drm-managed one. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
VMAs marked with VM_IO or VM_PFNMAP are not backed by struct page
objects, which GPUSVM requires in order to operate correctly. In
particular, get_pages() relies on hmm_range_fault() to resolve struct
pages for the target range.
Attempting to create an SVM range on such VMAs results in repeated
get_pages() failures and can lead to an infinite loop inside a driver’s
page‑fault handler. Prevent this by rejecting ranges on VM_IO or
VM_PFNMAP VMAs and returning -EIO. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-fence: Fix potential tracepoint null pointer dereferences
Trace_dma_fence_signaled, trace_dma_fence_wait_end and
trace_dma_fence_destroy can all currently dereference a null fence->ops
pointer after it has been reset on fence signalling.
Lets use the safe string getters for most tracepoints to avoid this class
of a problem, while for the signal tracepoint we move it to before ops are
cleared to avoid losing the driver and timeline name information. Apart
from moving it we also need to add a new tracepoint class to bypass the
safe name getters since the signaled bit is already set.
For dma_fence_init we also need to use the new tracepoint class since the
rcu read lock is not held there, and we can do the same for the enable
signaling since there we are certain the fence cannot be signaled while
we are holding the lock and have even validated the fence->ops. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix memory leak in radeon_ring_restore() on lock failure
radeon_ring_restore() takes ownership of the data buffer allocated by
radeon_ring_backup(). The caller (radeon_gpu_reset()) only frees it in
the non-restore branch; in the restore branch it relies on
radeon_ring_restore() to free it.
If radeon_ring_lock() fails, the function returned early without calling
kvfree(data), leaking the ring backup buffer on every GPU reset that
fails at the lock stage. During repeated GPU resets this causes
cumulative kernel memory exhaustion.
Free data before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: atcspi200: fix use-after-free when driver unbind
DMA resource is initialized after SPI controller registration. So
when driver unbind, this can trigger a use-after-free when DMA is
torn down while the controller is still alive and triggers DMA transfers. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: Remove the duplicate attr inode dirty marking action
Syzbot reported a null-ptr-deref in [1].
If the attributes file is not loaded during system mount, a trigger
occurs [1] when setxattr is executed in userspace.
Remove the first mark attr inode dirty operation.
[1]
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
Call Trace:
hfsplus_setxattr+0x124/0x340 fs/hfsplus/xattr.c:555
hfsplus_trusted_setxattr+0x40/0x60 fs/hfsplus/xattr_trusted.c:30
__vfs_setxattr+0x43c/0x480 fs/xattr.c:218
__vfs_setxattr_noperm+0x12d/0x660 fs/xattr.c:252
vfs_setxattr+0x163/0x360 fs/xattr.c:339
do_setxattr fs/xattr.c:654 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - fix blocking and non-blocking rng logic
The blocking and non-blocking paths were failing to provide valid entropy
due to improper buffer management. Reading the buffer starting from byte 1,
only fetch the 32 bytes of random data from the return message.
Tested on an Atmel SHA204A device.
Before (here for blocking), tests showed repeatedly reading reduced bytes.
$ head -c 32 /dev/hwrng | hexdump -C
00000000 02 28 85 b3 47 40 f2 ee 00 00 00 00 00 00 00 00 |.(..G@..........|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020
After, the result will be similar to the following:
$ head -c 32 /dev/hwrng | hexdump -C
00000000 5a fc 3f 13 14 68 fe 06 68 0a bd 04 83 6e 09 69 |Z.?..h..h....n.i|
00000010 75 ff cf 87 10 84 3b c9 c1 df ae eb 45 53 4c c3 |u.....;.....ESL.|
00000020 |
