| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The IPv6 neighbor-discovery code in subsys/net/ip/ipv6_nbr.c processes the 6LoWPAN Context Option (6CO, RFC 6775) carried inside ICMPv6 Router Advertisements. In handle_ra_6co() the 8-bit context_len field is taken directly from the packet and was never bounded to the RFC maximum of 128. The function computes context->context_len / 8 and then performs memset(context->prefix + context_len, 0, sizeof(context->prefix) - context_len), where context->prefix is a fixed 16-byte array.
With context_len between 136 and 255 (and the option length field set to 3, which the pre-fix validation accepts), context_len / 8 evaluates to 17..31, so the memset length 16 - context_len/8 underflows the unsigned size_t argument to roughly SIZE_MAX. This produces an unbounded out-of-bounds memset that zeroes kernel memory well past the 6lo context structure.
The defect is reachable from unauthenticated, link-local input: any host on the same link can send a crafted Router Advertisement with a 6CO option. The RA handler validates only the option length field before calling handle_ra_6co(), so a single packet triggers the wild write. The code is compiled when CONFIG_NET_6LO_CONTEXT is enabled.
The impact is a reliable remote (adjacent) denial of service via memory corruption, with collateral integrity loss as the memset zeroes contiguous memory before the system faults. Router Advertisements are link-scoped and not forwarded, so the attacker must be on the same link (AV:A). The fix rejects any context_len greater than 128 before the length computation. |
| A vulnerability has been identified in armeria-xds versions prior to 1.41.0, where xDS upstream TLS peer verification may be silently disabled, allowing man-in-the-middle attacks against xDS-managed upstream connections. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to an out-of-bounds write. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to an out-of-bounds write. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a stack-based buffer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary commands due to shell metacharacter injection. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an out-of-bounds write. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to obtain sensitive information due to a path traversal vulnerability. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 NIM could allow a remote attacker to gain unauthorized access to AIX systems due to improper validation of TLS certificates. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to uncontrolled resource consumption. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to uncontrolled resource consumption. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash.
This vulnerability is due to improper range checking when decompressing VBA data, which is user controlled. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause an overflow of heap data, which could cause a DoS condition. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Innotim Software, Telecommunications and Consulting Trade Ltd. Co. Logsign SIEM allows Code Injection.
This issue affects Logsign SIEM: before 6.4.115. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 VBA feature that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash.
This vulnerability is due to improper error checking when decompressing VBA data. An attacker could exploit this vulnerability by sending crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to enter an infinite loop, causing a DoS condition. |
| LMDeploy deserializes disaggregated-serving peer messages with pickle. The handle_zmq_recv coroutine in lmdeploy/pytorch/disagg/conn/engine_conn.py reads peer-to-peer cache-free requests with recv_pyobj(), which deserializes the received bytes with pickle.loads(), and the isinstance check against DistServeCacheFreeRequest runs only after deserialization has already completed. The peer that supplies those bytes is caller-controlled: p2p_connect passes remote_engine_endpoint_info.zmq_address from the request body to connect() on the ZMQ PULL socket, and the POST /distserve/p2p_initialize and /distserve/p2p_connect endpoints in lmdeploy/serve/openai/api_server.py apply no authentication unless the server is started with api_keys, which defaults to None. A remote attacker can direct an engine to pull from a ZMQ endpoint under their control and execute arbitrary code in the engine process. Deployments that do not enable disaggregated serving are not affected, because the receive loop is only started once the migration backend accepts the connection. |
| Grav is a file-based Web platform. Prior to 2.0.4, Grav allowlists the regex_replace filter and function in system/config/security.yaml, and GravExtension::regexReplace() passes an editor-controlled pattern directly to preg_replace(). When security.twig_content.process_enabled is enabled, an authenticated page editor can publish a catastrophically backtracking pattern that consumes PHP worker CPU and denies service to site visitors. This issue is fixed in version 2.0.4. |
| A flaw was found in Ansible Lightspeed. This vulnerability, related to insufficient session expiration, allows a remote attacker to maintain persistent access to the Ansible Lightspeed instance. If an attacker exfiltrates a valid OAuth (Open Authorization) access token before a user logs out, they can continue to authenticate and access sensitive data. This is because the application fails to invalidate the token on the backend, leaving it valid until its natural expiration. This can lead to unauthorized read access to Ansible resources such as inventories, playbooks, and configuration data. |
| Vulnerability in the Siebel CRM Integration product of Oracle Siebel CRM (component: Open Integration). Supported versions that are affected are 25.12-26.6. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Siebel CRM Integration. While the vulnerability is in Siebel CRM Integration, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Siebel CRM Integration accessible data as well as unauthorized access to critical data or complete access to all Siebel CRM Integration accessible data. CVSS 3.1 Base Score 8.7 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:N). |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 Visual Basic for Applications (VBA) feature which could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash.
This vulnerability is due to lack of proper error checking when decompressing VBA data. An attacker could exploit this vulnerability by sending a crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to unexpectedly restart causing a a denial of service (DoS) condition. |
| Vulnerability in the Siebel CRM Integration product of Oracle Siebel CRM (component: Open Integration). Supported versions that are affected are 25.12-26.6. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Siebel CRM Integration. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Siebel CRM Integration accessible data as well as unauthorized access to critical data or complete access to all Siebel CRM Integration accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:N). |
