| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Teams for Android allows an authorized attacker to perform spoofing over a network. |
| stoatchat before 0.15.0 contains a permission bypass vulnerability in the message_fetch route that checks only ViewChannel permission instead of requiring ReadMessageHistory. Attackers with ViewChannel access but ReadMessageHistory denied can retrieve individual message content by ID, bypassing the intended history restriction enforced by bulk read routes. |
| The User Profile Builder plugin for WordPress is vulnerable to Authentication Bypass via Type Confusion in versions up to, and including, 3.16.4. This is due to the wppb_log_in_user() function calling absint() on the return value of wp_insert_user() before performing an is_wp_error() check — when a registration is submitted with a 61–70 character username, WordPress core rejects it with a WP_Error object, but absint() coerces that object to the integer 1 before the error check can short-circuit execution, causing the plugin to bind and return a transient-backed autologin nonce tied to user ID 1. This makes it possible for unauthenticated attackers to log in as the site's Administrator account (user ID 1), resulting in full administrative takeover of the site. |
| Shescape before 2.1.15 (and 3.0.0 before 3.0.2) fails to properly escape tilde (~) characters in assignment contexts on Unix systems where the shell is explicitly configured to "sh" or true and /bin/sh points to BusyBox. Using the escape and escapeAll APIs with untrusted input in an assignment prefixed to a command, an attacker can inject a tilde payload to disclose the user's home directory location and, depending on usage, alter the location on which a command operates. |
| A security vulnerability has been detected in Tenda AC10 16.03.10.09_multi_TDE01. This vulnerability affects the function R7WebsSecurityHandler of the component httpd. The manipulation leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability was detected in Mendi Neurofeedback Headset V4. Affected by this vulnerability is an unknown functionality of the component Bluetooth Low Energy Handler. Performing a manipulation results in cleartext transmission of sensitive information. The attack can only be performed from the local network. The attack's complexity is rated as high. The exploitation appears to be difficult. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in DefaultFuction Customer-Relationship-Management-In-C-Project 2.0. Impacted is the function gets of the component Customer Search Module. This manipulation causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project confirms, that "it’s being processed". |
| A vulnerability was determined in OpenBoxes up to 0.9.7. This affects the function needManager of the file grails-app/controllers/org/pih/warehouse/RoleInterceptor.groovy of the component Role Interceptor. Executing a manipulation can lead to improper privilege management. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.9.8-hotfix1 and 0.9.8 mitigates this issue. This patch is called 788cace0af816aa972a713a4631c57f16f895e6b. Upgrading the affected component is recommended. |
| A flaw has been found in code-projects Online Food Order System 1.0. The impacted element is an unknown function of the file delete_food_items1.php. Executing a manipulation of the argument checkbox can lead to sql injection. The attack can be executed remotely. The exploit has been published and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: Fix race in vduse_dev_msg_sync and vduse_dev_read_iter
There is one race case in vduse_dev_msg_sync and vduse_dev_read_iter:
vduse_dev_read_iter():
lock(msg_lock);
dequeue_msg(send_list);
unlock(msg_lock);
vduse_dev_msg_sync():
wait_timeout() finish
lock(msg_lock);
check msg->complete is false
list_del(msg); <- double list_del() crash!
To fix this case, we shall ensure vduse_msg is on send_list or recv_list
outside the msg_lock critical section. |
| A vulnerability was found in SourceCodester Online Book Store System 1.0. This vulnerability affects unknown code of the file /admin/index.php?page=site_settings of the component System Settings Module. The manipulation results in cross site scripting. The attack can be executed remotely. The exploit has been made public and could be used. |
| A vulnerability was determined in SourceCodester Class and Exam Timetabling System 1.0. The affected element is an unknown function of the file /edit_teacher.php. Executing a manipulation of the argument ID can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was found in VictoriaMetrics up to 1.146.0. Impacted is the function requestHandler of the file app/vmauth/main.go of the component VMAuth Authentication Endpoint. Performing a manipulation results in improper restriction of excessive authentication attempts. The attack is possible to be carried out remotely. The complexity of an attack is rather high. The exploitability is considered difficult. The exploit has been made public and could be used. Upgrading to version 1.147.0 is recommended to address this issue. The patch is named 119ba0fb5be8024d50c5ba946599b2e69e8803ea. Upgrading the affected component is recommended. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Fix out-of-bounds page-table walk during memory hot-remove
remove_pud_mapping() and remove_p4d_mapping() obtain a child table base
with pud_offset(p4dp, 0) and p4d_offset(pgd, 0), then add the index for
addr.
RISC-V folds page-table levels at runtime. When a level is folded, its
offset helper returns the parent entry itself, but the index can still be
nonzero. Adding it walks past the parent table. Sv48 folds P4D, while Sv39
folds both P4D and PUD, so memory hot-remove can descend into unrelated
memory and pass an invalid page to __free_pages(). This can trigger:
kernel BUG at include/linux/mm.h:1810!
VM_BUG_ON_PAGE(page_ref_count(page) == 0)
arch_remove_memory+0x1e/0x5c
try_remove_memory+0x15e/0x200
remove_memory+0x24/0x3c
Only add the index when the corresponding page-table level is enabled,
matching p4d_offset() and pud_offset(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: udp_tunnel: fix memory leak in udp_tunnel_nic_unregister()
syzbot reported a memory leak [1] in the UDP tunnel NIC offload code.
When device registration fails (e.g. in register_netdevice()), netdev core
unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued
during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister()
returns early:
if (utn->work_pending)
return;
Because failed registrations do not enter netdev_wait_allrefs_any(), no
subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the
struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked
permanently.
Fix this by removing the early return. Instead, synchronously cancel any
pending work with cancel_delayed_work_sync() before freeing @utn.
To be able to call cancel_delayed_work_sync() while holding RTNL (the work also
needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL
is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work())
to prevent high CPU contention while waiting for RTNL lock.
The utn->work_pending bookkeeping is no longer needed and is removed, as
the workqueue core already tracks the pending/running state of the work.
[1]
BUG: memory leak
unreferenced object 0xffff888127d5f840 (size 96):
comm "syz-executor", pid 5806, jiffies 4294942188
backtrace (crc 99fdb6c8):
__kmalloc_noprof+0x3bf/0x550
udp_tunnel_nic_alloc net/ipv4/udp_tunnel_nic.c:756 [inline]
udp_tunnel_nic_register net/ipv4/udp_tunnel_nic.c:833 [inline]
udp_tunnel_nic_netdevice_event+0x804/0xab0 net/ipv4/udp_tunnel_nic.c:931
notifier_call_chain+0x59/0x160 kernel/notifier.c:85
call_netdevice_notifiers_info+0x7d/0xb0 net/core/dev.c:2250
register_netdevice+0xc10/0xeb0 net/core/dev.c:11478 |
| A vulnerability has been found in mangroup dtale up to 3.22.0. This issue affects the function Login of the file dtale/auth.py of the component Login Endpoint. Such manipulation leads to improper restriction of excessive authentication attempts. The attack can be executed remotely. This attack is characterized by high complexity. The exploitability is assessed as difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ump: fix double free of out_cvts on rawmidi error
snd_ump_attach_legacy_rawmidi() allocates the legacy conversion array
ump->out_cvts and, on the snd_rawmidi_new() error path, frees it with
kfree() but leaves ump->out_cvts pointing at the freed memory. When the
endpoint is later torn down, snd_ump_endpoint_free() frees ump->out_cvts
a second time, resulting in a double free.
The host snd-usb-audio driver attaches the legacy rawmidi for any USB
MIDI 2.0 (UMP) device, so a device that makes snd_rawmidi_new() fail
reaches this path on enumeration.
Clear ump->out_cvts after freeing it on the error path so it is not
freed again during teardown.
Discovered by XBOW, triaged by Baul Lee <[email protected]> |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Fix division by zero in initialize_timer()
A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set
the backing snd_timer's hardware resolution to an arbitrary 64-bit value
via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero.
When such a timer is bound to a sequencer queue, initialize_timer()
computes the tick period as
tmr->ticks = 1000000000 / (r * freq);
where r is that user-controlled resolution and freq is the sequencer
update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250).
A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for
any even freq, including DEFAULT_FREQUENCY (1000), so the division faults
with a divide-by-zero.
The division runs under tmr->lock with interrupts disabled, so the oops
leaves the spinlock held and hangs the CPU. It is reachable by an
unprivileged user with access to /dev/snd/timer and /dev/snd/seq.
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+
RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0
snd_seq_timer_start+0x15e/0x2b0
snd_seq_control_queue+0x56f/0xba0
snd_seq_write+0x3e0/0x730
Reject an overflowing product with check_mul_overflow() and fall back to
a single tick, which also avoids feeding a wrapped-but-nonzero divisor
(e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small
value) into the period computation. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: mark I2C adapter when hardware is powered down
On some i.MX platforms, certain I2C client drivers keep a periodic
workqueue which continues to trigger I2C transfers.
During system suspend/resume, there exists a time window between:
- suspend_noirq and the system entering suspend
- the system starting to resume and resume_noirq
In this window, the I2C controller resources such as clock and pinctrl
may already be disabled or not yet restored.
If a workqueue triggers an I2C transfer in this period, the driver
attempts to access I2C registers while the hardware resources are
unavailable, which may lead to system hang.
Mark the I2C adapter as suspended during noirq suspend and block new
transfers until resume, ensuring that I2C transfers are only issued
when hardware resources are available. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Close speculative mem read possibility
The domain value is extracted from a given CCA or EP11 ioctl struct
when a CPRB is about to be sent. Thus this is a user controlled value.
Under some special conditions (custom device node used, administrative
load) this value is used as an array index after bounds checking, but
without speculation barrier.
Add the missing array_index_nospec() call to prevent speculative
execution where this domain value is used. |
