| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent potential lcn remains uninitialized
The target VCN being sought was not found within runs[0], causing
run_lookup() to return false. This causes run_lookup_entry() to return
false, which in turn results in a len value of 0, and the new parameter
passed to attr_data_get_block() is NULL. Collectively, these factors
ultimately cause attr_data_get_block_locked() to exit prematurely without
initializing lcn, thereby triggering [1].
To prevent [1], the clen check within ni_seek_data_or_hole() has been
moved to occur before the lcn check.
[1]
BUG: KMSAN: uninit-value in ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862
ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862
ntfs_llseek+0x22a/0x4a0 fs/ntfs3/file.c:1530
vfs_llseek fs/read_write.c:391 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: fix double decrement of descriptor_busy in command_ioctl()
commit d1857f8296dc ("gpib: fix use-after-free in IO ioctl handlers")
introduced a descriptor_busy reference counter to pin struct
gpib_descriptor across IO ioctl operations. In command_ioctl(), the
error path inside the loop decrements descriptor_busy and breaks, but
execution then falls through to the unconditional decrement after the
loop, underflowing the counter to -1.
This re-enables the use-after-free that the original fix was meant to
prevent: a concurrent close_dev_ioctl() sees descriptor_busy == 0 on
an actively-used descriptor and frees it.
Remove the early decrement from the error path. The post-loop
decrement already handles all exit paths, matching the correct pattern
used in read_ioctl() and write_ioctl(). |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock
Fix a severe AB/BA deadlock between the Common Clock Framework (CCF)
and the I2C adapter lock, which triggers when an I2C-controlled clock
generator client (like the Si5351) is registered or modified under the CCF.
During an i2c client clock (generator) frequency change, the CCF acquires its global
'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's
chip registers, stalling for the adapter's I2C bus lock.
Concurrently, an independent, parallel transfer on the same bus (e.g., a GPIO
expander handling LEDs) can hold the I2C adapter lock. Inside this parallel
transfer path, jz4780_i2c_set_speed() calls clk_get_rate() on the host
controller's input clock to calculate bus timings. This call attempts to acquire
the blocked CCF 'prepare_lock', creating a circular dependency that freezes
the system.
The jz4780 host controller clock itself is static and never changes at runtime.
However, calling clk_get_rate() inside the active transfer path introduces
an unnecessary dependency on the CCF internal locks.
Eliminate this synchronous clk_get_rate() call from the active transfer
path by caching the static host peripheral clock rate once - inside the private
jz4780_i2c structure during jz4780_i2c_probe(). Update jz4780_i2c_set_speed()
to use this cached value, safely decoupling active I2C transactions from the
CCF internal locks without any risk of stale timings.
Assisted-by web based Google AI (pinpointing the bug and writing the message). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Fix out-of-bounds page-table walk during memory hot-remove
remove_pud_mapping() and remove_p4d_mapping() obtain a child table base
with pud_offset(p4dp, 0) and p4d_offset(pgd, 0), then add the index for
addr.
RISC-V folds page-table levels at runtime. When a level is folded, its
offset helper returns the parent entry itself, but the index can still be
nonzero. Adding it walks past the parent table. Sv48 folds P4D, while Sv39
folds both P4D and PUD, so memory hot-remove can descend into unrelated
memory and pass an invalid page to __free_pages(). This can trigger:
kernel BUG at include/linux/mm.h:1810!
VM_BUG_ON_PAGE(page_ref_count(page) == 0)
arch_remove_memory+0x1e/0x5c
try_remove_memory+0x15e/0x200
remove_memory+0x24/0x3c
Only add the index when the corresponding page-table level is enabled,
matching p4d_offset() and pud_offset(). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (lm90) Only report alarms if driver is ready
Userspace can read sysfs attributes before driver registration is complete,
immediately after devm_hwmon_device_register_with_info() has been called.
At that time, data->hwmon_dev is not yet initialized. This can trigger
a NULL pointer access since lm90_update_device() and with it
lm90_update_alarms_locked() will be called. This call schedules
report_work and lm90_report_alarms(), which passes the still-NULL
data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer
dereference.
Fix the problem by only scheduling the report and alert workers
data->hwmon_dev is set. |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the Oracle Hyperion Data Relationship Management executes to compromise Oracle Hyperion Data Relationship Management. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Data Relationship Management accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N). |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Data Relationship Management. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Data Relationship Management accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:N). |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle Hyperion Data Relationship Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Data Relationship Management accessible data as well as unauthorized update, insert or delete access to some of Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 8.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N). |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Hyperion Data Relationship Management executes to compromise Oracle Hyperion Data Relationship Management. While the vulnerability is in Oracle Hyperion Data Relationship Management, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle Hyperion Data Relationship Management executes to compromise Oracle Hyperion Data Relationship Management. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Data Relationship Management accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N). |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Data Relationship Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Data Relationship Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Data Relationship Management accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.25.0.000. Difficult to exploit vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Hyperion Data Relationship Management. Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Data Relationship Management. CVSS 3.1 Base Score 6.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix out-of-bounds access in cxl_cancel_auto_attach()
In cxl_cancel_auto_attach(), it assumes cxled->pos is a valid index for
accessing p->targets[]. However, cxled->pos can be set to negative errno
in cxl_region_sort_targets() if cxl_calc_interleave_pos() fails. This
causes the driver to use a negative index to access p->targets[],
resulting in out-of-bounds access.
Fix it by walking p->targets[] instead of using cxled->pos directly. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: xilinx: use FIFO occupancy register to determine buffer size
The method the driver uses to determine the size of the FIFO has a
problem. What it currently does is this:
It stops the SPI hardware and writes to the TX FIFO register until TX
FIFO FULL asserts in the status register. But the hardware does not only
have the FIFO, it also has a shift register which can hold a byte. This
can be seen, when writing a byte to the FIFO (while the SPI hardware is
stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size
of 16 for example, the current method returns a 17.
This is a problem, at least when using the driver in irq mode. The same
size determined for the TX FIFO is also assumed for the RX FIFO. When a
SPI transaction wants to write the amount of the FIFO size or more
bytes, the following happens, for example with 16 bytes FIFO size:
The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and
starts the SPI hardware and goes sleep.
The hardware then shifts out 17 bytes (FIFO + shift register) and
simultaneously reads bytes into the RX FIFO, but it only has 16 places,
so it looses one byte. Then TX FIFO empty asserts, wakes the driver
again, which has a fast path and reads 16 bytes from the RX FIFO, but
before reading the last 17th byte (which is lost) it does this:
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
if (!(sr & XSPI_SR_RX_EMPTY_MASK)) {
xilinx_spi_rx(xspi);
rx_words--;
}
It reads the status register and checks if the RX FIFO is not empty.
But it is empty in our case. So this check spins in a while loop
forever locking the driver.
This patch fixes the logic to determine the FIFO size. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
The sg_cleanup path used list[i] instead of list[j] when unmapping DMA
buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Stop leased rxq before uninstalling its memory provider
netif_rxq_cleanup_unlease() tears down the memory provider that was
installed on a physical RX queue through a netkit queue lease. It
currently revokes the provider's DMA mappings before stopping the
physical queue:
__netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */
__netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */
This inverts the ordering used by the regular teardown paths (normal
device unregister and the io_uring zcrx close path), which stop the
queue before revoking the provider's mappings.
With the physical queue still live, its NAPI can keep consuming
net_iov entries from the page_pool alloc cache after the
__netif_mp_uninstall_rxq() has already cleared their dma_addr,
opening a window for the device to DMA to a stale or zero address.
Fix it by swapping the two calls so the queue is stopped (and its
NAPI quiesced) before the provider is uninstalled. No functional
regression was observed across repeated runs of the nk_qlease.py
HW selftest, which exercises the lease teardown path; this was
tested against fbnic QEMU emulation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix FRMR aging push to queue error flow
Aging pools with pinned handles requires moving handles from the
active queue to a non-empty inactive queue that might fail on new page
allocation, we are currently not handling the fault and leaking any mkey
that fails the push.
Fix by Introducing push_queue_to_queue_locked() that fills the
destination's partial tail page from the source and then splices the
remaining source pages onto the destination, performing no allocation.
Replace the per-handle move loop in age_pinned_pool() and the
open-coded splice in pool_aging_work() with calls to the helper.
As the helper cannot fail under memory pressure, removing a class of
GFP_ATOMIC allocations under the pool lock and simplifying the error
flow. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/qat: fix f_pos race in qat_vf_resume_write()
qat_vf_resume_write() checks filp->f_pos before taking migf->lock, but
copies into the migration-state buffer after taking the lock and
re-reading the shared file position.
Two concurrent writers could therefore pass the bounds check with the
old offset, then have the second writer copy after the first advanced
f_pos, writing past the end of the migration-state buffer.
Take migf->lock before doing the boundary checks. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock waiting for ticket during data relocation
When performing data relocation on a zoned filesystem, BTRFS can deadlock
in handle_reserve_tickets(). The relocation process is waiting on a space
reservation ticket that can never be fulfilled, because the relocation
itself is the operation responsible for freeing up that space.
Fix this by introducing a new flush state,
BTRFS_RESERVE_FLUSH_ZONED_RELOCATION, specifically for data chunk
allocation during zoned relocation. Like
BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE, this state uses
priority_reclaim_data_space() instead of the normal flushing path, which
avoids re-entering the relocation code and breaking the deadlock cycle.
In btrfs_alloc_data_chunk_ondemand(), select this new flush state when the
inode belongs to a data relocation root on a zoned filesystem. |
