| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: fix a double-free in si_dpm_init
When the allocation of
adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails,
amdgpu_free_extended_power_table is called to free some fields of adev.
However, when the control flow returns to si_dpm_sw_init, it goes to
label dpm_failed and calls si_dpm_fini, which calls
amdgpu_free_extended_power_table again and free those fields again. Thus
a double-free is triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
of: Fix double free in of_parse_phandle_with_args_map
In of_parse_phandle_with_args_map() the inner loop that
iterates through the map entries calls of_node_put(new)
to free the reference acquired by the previous iteration
of the inner loop. This assumes that the value of "new" is
NULL on the first iteration of the inner loop.
Make sure that this is true in all iterations of the outer
loop by setting "new" to NULL after its value is assigned to "cur".
Extend the unittest to detect the double free and add an additional
test case that actually triggers this path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix a potential double-free in fs_any_create_groups
When kcalloc() for ft->g succeeds but kvzalloc() for in fails,
fs_any_create_groups() will free ft->g. However, its caller
fs_any_create_table() will free ft->g again through calling
mlx5e_destroy_flow_table(), which will lead to a double-free.
Fix this by setting ft->g to NULL in fs_any_create_groups(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Avoid reading beyond LUT array
When the floor LUT index (drm_fixp2int(lut_index) is the last
index of the array the ceil LUT index will point to an entry
beyond the array. Make sure we guard against it and use the
value of the floor LUT index.
v3:
- Drop bits from commit description that didn't contribute
anything of value |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix oob in ntfs_listxattr
The length of name cannot exceed the space occupied by ea. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...)
modifies jsk->filters while receiving packets.
Following trace was seen on affected system:
==================================================================
BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
Read of size 4 at addr ffff888012144014 by task j1939/350
CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
print_report+0xd3/0x620
? kasan_complete_mode_report_info+0x7d/0x200
? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
kasan_report+0xc2/0x100
? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
__asan_load4+0x84/0xb0
j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
j1939_sk_recv+0x20b/0x320 [can_j1939]
? __kasan_check_write+0x18/0x20
? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939]
? j1939_simple_recv+0x69/0x280 [can_j1939]
? j1939_ac_recv+0x5e/0x310 [can_j1939]
j1939_can_recv+0x43f/0x580 [can_j1939]
? __pfx_j1939_can_recv+0x10/0x10 [can_j1939]
? raw_rcv+0x42/0x3c0 [can_raw]
? __pfx_j1939_can_recv+0x10/0x10 [can_j1939]
can_rcv_filter+0x11f/0x350 [can]
can_receive+0x12f/0x190 [can]
? __pfx_can_rcv+0x10/0x10 [can]
can_rcv+0xdd/0x130 [can]
? __pfx_can_rcv+0x10/0x10 [can]
__netif_receive_skb_one_core+0x13d/0x150
? __pfx___netif_receive_skb_one_core+0x10/0x10
? __kasan_check_write+0x18/0x20
? _raw_spin_lock_irq+0x8c/0xe0
__netif_receive_skb+0x23/0xb0
process_backlog+0x107/0x260
__napi_poll+0x69/0x310
net_rx_action+0x2a1/0x580
? __pfx_net_rx_action+0x10/0x10
? __pfx__raw_spin_lock+0x10/0x10
? handle_irq_event+0x7d/0xa0
__do_softirq+0xf3/0x3f8
do_softirq+0x53/0x80
</IRQ>
<TASK>
__local_bh_enable_ip+0x6e/0x70
netif_rx+0x16b/0x180
can_send+0x32b/0x520 [can]
? __pfx_can_send+0x10/0x10 [can]
? __check_object_size+0x299/0x410
raw_sendmsg+0x572/0x6d0 [can_raw]
? __pfx_raw_sendmsg+0x10/0x10 [can_raw]
? apparmor_socket_sendmsg+0x2f/0x40
? __pfx_raw_sendmsg+0x10/0x10 [can_raw]
sock_sendmsg+0xef/0x100
sock_write_iter+0x162/0x220
? __pfx_sock_write_iter+0x10/0x10
? __rtnl_unlock+0x47/0x80
? security_file_permission+0x54/0x320
vfs_write+0x6ba/0x750
? __pfx_vfs_write+0x10/0x10
? __fget_light+0x1ca/0x1f0
? __rcu_read_unlock+0x5b/0x280
ksys_write+0x143/0x170
? __pfx_ksys_write+0x10/0x10
? __kasan_check_read+0x15/0x20
? fpregs_assert_state_consistent+0x62/0x70
__x64_sys_write+0x47/0x60
do_syscall_64+0x60/0x90
? do_syscall_64+0x6d/0x90
? irqentry_exit+0x3f/0x50
? exc_page_fault+0x79/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Allocated by task 348:
kasan_save_stack+0x2a/0x50
kasan_set_track+0x29/0x40
kasan_save_alloc_info+0x1f/0x30
__kasan_kmalloc+0xb5/0xc0
__kmalloc_node_track_caller+0x67/0x160
j1939_sk_setsockopt+0x284/0x450 [can_j1939]
__sys_setsockopt+0x15c/0x2f0
__x64_sys_setsockopt+0x6b/0x80
do_syscall_64+0x60/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 349:
kasan_save_stack+0x2a/0x50
kasan_set_track+0x29/0x40
kasan_save_free_info+0x2f/0x50
__kasan_slab_free+0x12e/0x1c0
__kmem_cache_free+0x1b9/0x380
kfree+0x7a/0x120
j1939_sk_setsockopt+0x3b2/0x450 [can_j1939]
__sys_setsockopt+0x15c/0x2f0
__x64_sys_setsockopt+0x6b/0x80
do_syscall_64+0x60/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8 |
| In the Linux kernel, the following vulnerability has been resolved:
sh: push-switch: Reorder cleanup operations to avoid use-after-free bug
The original code puts flush_work() before timer_shutdown_sync()
in switch_drv_remove(). Although we use flush_work() to stop
the worker, it could be rescheduled in switch_timer(). As a result,
a use-after-free bug can occur. The details are shown below:
(cpu 0) | (cpu 1)
switch_drv_remove() |
flush_work() |
... | switch_timer // timer
| schedule_work(&psw->work)
timer_shutdown_sync() |
... | switch_work_handler // worker
kfree(psw) // free |
| psw->state = 0 // use
This patch puts timer_shutdown_sync() before flush_work() to
mitigate the bugs. As a result, the worker and timer will be
stopped safely before the deallocate operations. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: scomp - fix req->dst buffer overflow
The req->dst buffer size should be checked before copying from the
scomp_scratch->dst to avoid req->dst buffer overflow problem. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: use DEV_STATS_INC()
syzbot/KCSAN reported data-races in br_handle_frame_finish() [1]
This function can run from multiple cpus without mutual exclusion.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
Handles updates to dev->stats.tx_dropped while we are at it.
[1]
BUG: KCSAN: data-race in br_handle_frame_finish / br_handle_frame_finish
read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 1:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 0:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
do_softirq+0x5e/0x90 kernel/softirq.c:454
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_tt_local_purge+0x1a8/0x1f0 net/batman-adv/translation-table.c:1356
batadv_tt_purge+0x2b/0x630 net/batman-adv/translation-table.c:3560
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
value changed: 0x00000000000d7190 -> 0x00000000000d7191
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 14848 Comm: kworker/u4:11 Not tainted 6.6.0-rc1-syzkaller-00236-gad8a69f361b9 #0 |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rk817: Fix node refcount leak
Dan Carpenter reports that the Smatch static checker warning has found
that there is another refcount leak in the probe function. While
of_node_put() was added in one of the return paths, it should in
fact be added for ALL return paths that return an error and at driver
removal time. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: Fix a memory corruption issue
A few lines above, space is kzalloc()'ed for:
sizeof(struct iwl_nvm_data) +
sizeof(struct ieee80211_channel) +
sizeof(struct ieee80211_rate)
'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine.
At the end of this structure, there is the 'channels' flex array.
Each element is of type 'struct ieee80211_channel'.
So only 1 element is allocated in this array.
When doing:
mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels;
We point at the first element of the 'channels' flex array.
So this is fine.
However, when doing:
mvm->nvm_data->bands[0].bitrates =
(void *)((u8 *)mvm->nvm_data->channels + 1);
because of the "(u8 *)" cast, we add only 1 to the address of the beginning
of the flex array.
It is likely that we want point at the 'struct ieee80211_rate' allocated
just after.
Remove the spurious casting so that the pointer arithmetic works as
expected. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band)
service, which allows to wakup device when the system is in S5 (Soft-Off
state). This OOB service can be enabled/disabled from BIOS settings. When
enabled, the ISH device gets PME wake capability. To enable PME wakeup,
driver also needs to enable ACPI GPE bit.
On resume, BIOS will clear the wakeup bit. So driver need to re-enable it
in resume function to keep the next wakeup capability. But this BIOS
clearing of wakeup bit doesn't decrement internal OS GPE reference count,
so this reenabling on every resume will cause reference count to overflow.
So first disable and reenable ACPI GPE bit using acpi_disable_gpe(). |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: Fix a potential UAF in ca8210_probe
If of_clk_add_provider() fails in ca8210_register_ext_clock(),
it calls clk_unregister() to release priv->clk and returns an
error. However, the caller ca8210_probe() then calls ca8210_remove(),
where priv->clk is freed again in ca8210_unregister_ext_clock(). In
this case, a use-after-free may happen in the second time we call
clk_unregister().
Fix this by removing the first clk_unregister(). Also, priv->clk could
be an error code on failure of clk_register_fixed_rate(). Use
IS_ERR_OR_NULL to catch this case in ca8210_unregister_ext_clock(). |
| In the Linux kernel, the following vulnerability has been resolved:
ravb: Fix use-after-free issue in ravb_tx_timeout_work()
The ravb_stop() should call cancel_work_sync(). Otherwise,
ravb_tx_timeout_work() is possible to use the freed priv after
ravb_remove() was called like below:
CPU0 CPU1
ravb_tx_timeout()
ravb_remove()
unregister_netdev()
free_netdev(ndev)
// free priv
ravb_tx_timeout_work()
// use priv
unregister_netdev() will call .ndo_stop() so that ravb_stop() is
called. And, after phy_stop() is called, netif_carrier_off()
is also called. So that .ndo_tx_timeout() will not be called
after phy_stop(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: assert requested protocol is valid
The protocol is used in a bit mask to determine if the protocol is
supported. Assert the provided protocol is less than the maximum
defined so it doesn't potentially perform a shift-out-of-bounds and
provide a clearer error for undefined protocols vs unsupported ones. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/alternatives: Disable KASAN in apply_alternatives()
Fei has reported that KASAN triggers during apply_alternatives() on
a 5-level paging machine:
BUG: KASAN: out-of-bounds in rcu_is_watching()
Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0
...
__asan_load4()
rcu_is_watching()
trace_hardirqs_on()
text_poke_early()
apply_alternatives()
...
On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57)
gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on
__VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled().
KASAN gets confused when apply_alternatives() patches the
KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START
static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue.
Fix it for real by disabling KASAN while the kernel is patching alternatives.
[ mingo: updated the changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: pmic_glink_altmode: fix port sanity check
The PMIC GLINK altmode driver currently supports at most two ports.
Fix the incomplete port sanity check on notifications to avoid
accessing and corrupting memory beyond the port array if we ever get a
notification for an unsupported port. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run
In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work.
In mtk_jpeg_dec_device_run, if error happens in
mtk_jpeg_set_dec_dst, it will finally start the worker while
mark the job as finished by invoking v4l2_m2m_job_finish.
There are two methods to trigger the bug. If we remove the
module, it which will call mtk_jpeg_remove to make cleanup.
The possible sequence is as follows, which will cause a
use-after-free bug.
CPU0 CPU1
mtk_jpeg_dec_... |
start worker |
|mtk_jpeg_job_timeout_work
mtk_jpeg_remove |
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use
If we close the file descriptor, which will call mtk_jpeg_release,
it will have a similar sequence.
Fix this bug by starting timeout worker only if started jpegdec worker
successfully. Then v4l2_m2m_job_finish will only be called in
either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: perform route lookups under a RCU read-side lock
Our current route lookups (mctp_route_lookup and mctp_route_lookup_null)
traverse the net's route list without the RCU read lock held. This means
the route lookup is subject to preemption, resulting in an potential
grace period expiry, and so an eventual kfree() while we still have the
route pointer.
Add the proper read-side critical section locks around the route
lookups, preventing premption and a possible parallel kfree.
The remaining net->mctp.routes accesses are already under a
rcu_read_lock, or protected by the RTNL for updates.
Based on an analysis from Sili Luo <[email protected]>, where
introducing a delay in the route lookup could cause a UAF on
simultaneous sendmsg() and route deletion. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests
hfi1 user SDMA request processing has two bugs that can cause data
corruption for user SDMA requests that have multiple payload iovecs
where an iovec other than the tail iovec does not run up to the page
boundary for the buffer pointed to by that iovec.a
Here are the specific bugs:
1. user_sdma_txadd() does not use struct user_sdma_iovec->iov.iov_len.
Rather, user_sdma_txadd() will add up to PAGE_SIZE bytes from iovec
to the packet, even if some of those bytes are past
iovec->iov.iov_len and are thus not intended to be in the packet.
2. user_sdma_txadd() and user_sdma_send_pkts() fail to advance to the
next iovec in user_sdma_request->iovs when the current iovec
is not PAGE_SIZE and does not contain enough data to complete the
packet. The transmitted packet will contain the wrong data from the
iovec pages.
This has not been an issue with SDMA packets from hfi1 Verbs or PSM2
because they only produce iovecs that end short of PAGE_SIZE as the tail
iovec of an SDMA request.
Fixing these bugs exposes other bugs with the SDMA pin cache
(struct mmu_rb_handler) that get in way of supporting user SDMA requests
with multiple payload iovecs whose buffers do not end at PAGE_SIZE. So
this commit fixes those issues as well.
Here are the mmu_rb_handler bugs that non-PAGE_SIZE-end multi-iovec
payload user SDMA requests can hit:
1. Overlapping memory ranges in mmu_rb_handler will result in duplicate
pinnings.
2. When extending an existing mmu_rb_handler entry (struct mmu_rb_node),
the mmu_rb code (1) removes the existing entry under a lock, (2)
releases that lock, pins the new pages, (3) then reacquires the lock
to insert the extended mmu_rb_node.
If someone else comes in and inserts an overlapping entry between (2)
and (3), insert in (3) will fail.
The failure path code in this case unpins _all_ pages in either the
original mmu_rb_node or the new mmu_rb_node that was inserted between
(2) and (3).
3. In hfi1_mmu_rb_remove_unless_exact(), mmu_rb_node->refcount is
incremented outside of mmu_rb_handler->lock. As a result, mmu_rb_node
could be evicted by another thread that gets mmu_rb_handler->lock and
checks mmu_rb_node->refcount before mmu_rb_node->refcount is
incremented.
4. Related to #2 above, SDMA request submission failure path does not
check mmu_rb_node->refcount before freeing mmu_rb_node object.
If there are other SDMA requests in progress whose iovecs have
pointers to the now-freed mmu_rb_node(s), those pointers to the
now-freed mmu_rb nodes will be dereferenced when those SDMA requests
complete. |
