| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| exceljs through 4.4.0 contains a prototype pollution vulnerability in the deepMerge helper that fails to reject __proto__, constructor, or prototype keys when merging note objects. Attackers can assign parsed JSON with a malicious __proto__ property to cell notes, modifying Object.prototype and affecting all plain objects created in the process. |
| NLTK versions before 3.10.0 default to ENFORCE=False in pathsec.py, causing all security validation functions to emit warnings instead of raising exceptions. Attackers can bypass path traversal and pickle deserialization protections by exploiting the disabled security controls that are only active when manually enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lwtunnel: Drop skb metadata before LWT encapsulation
skb metadata is meant for passing information between XDP and TC. It lives
in the skb headroom, immediately before skb->data. LWT programs cannot
access the __sk_buff->data_meta pseudo-pointer to metadata.
However, LWT encapsulation prepends outer headers, moving skb->data back
over the headroom where the metadata sits. On an RX-originated (forwarded)
packet that still carries XDP metadata this goes wrong in two different
ways, depending on the encap type:
1. Non-BPF LWT encaps (mpls, seg6, ioam6 ...) call skb_push()/skb_pull()
and silently overwrite the metadata that sits in the headroom.
2) BPF LWT xmit calls bpf_skb_change_head(), which uses skb_data_move().
That helper expects metadata immediately before skb->data. But since
the IP output path runs LWT xmit before neighbour output has built
the outgoing L2 header, for forwarded packets skb->data points at the
L3 header while skb_mac_header() still points at the old L2 header.
skb_data_move() sees metadata ending at skb_mac_header(), not before
skb->data, warns and clears metadata:
WARNING: CPU: 21 PID: 454557 at include/linux/skbuff.h:4609 skb_data_move+0x47/0x90
CPU: 21 UID: 0 PID: 454557 Comm: napi/iconduit-g Tainted: G O 6.18.21 #1
RIP: 0010:skb_data_move+0x47/0x90
Call Trace:
<IRQ>
bpf_skb_change_head+0xe6/0x1a0
bpf_prog_...+0x213/0x2e3
run_lwt_bpf.isra.0+0x1d3/0x360
bpf_xmit+0x46/0xe0
lwtunnel_xmit+0xa1/0xf0
ip_finish_output2+0x1e7/0x5e0
ip_output+0x63/0x100
__netif_receive_skb_one_core+0x85/0xa0
process_backlog+0x9c/0x150
__napi_poll+0x2b/0x190
net_rx_action+0x40b/0x7f0
handle_softirqs+0xd2/0x270
do_softirq+0x3f/0x60
</IRQ>
That is what happens, as for how to fix it - a received packet that
carries metadata can reach an encap through any of the three LWT
redirect modes:
LWTUNNEL_STATE_INPUT_REDIRECT
ip6_rcv_finish
dst_input
lwtunnel_input
LWTUNNEL_STATE_OUTPUT_REDIRECT
ip6_rcv_finish
dst_input
ip6_forward
ip6_forward_finish
dst_output
lwtunnel_output
LWTUNNEL_STATE_XMIT_REDIRECT
ip6_rcv_finish
dst_input
ip6_forward
ip6_forward_finish
dst_output
ip6_output
ip6_finish_output
ip6_finish_output2
lwtunnel_xmit
Every encap funnels through the three LWT dispatch helpers, so drop the
metadata there, right before handing the skb to the encap op. This
single chokepoint covers all encap types and all three redirect modes:
- lwtunnel_input(): seg6, rpl, ila, seg6_local
- lwtunnel_output(): ioam6
- lwtunnel_xmit(): mpls, LWT BPF xmit
Alternatively, we could clear the metadata right after TC ingress hook.
That would require a compromise, however. Metadata would become
inaccessible from TC egress (in setups where it actually reaches the
hook it tact, that is without any L2 tunnels on path). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ltc4282) Fix reading the minimum alarm voltage
Coverity reports an out-of-bounds access when reading the minimum alarm
voltage for the VGPIO channel. Add the missing return statement to fix
the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix u16 truncation of restart-area length check
ntfs_check_restart_area() validates that the $LogFile restart area and
its trailing log client record array fit within the system page size:
u16 ra_ofs, ra_len, ca_ofs;
...
ra_len = ca_ofs + le16_to_cpu(ra->log_clients) *
sizeof(struct log_client_record);
if (ra_ofs + ra_len > le32_to_cpu(rp->system_page_size) || ...)
return false;
ra_len is u16, but the right-hand side is computed in size_t
(sizeof(struct log_client_record) == 160). Both ca_ofs and log_clients
come straight from the on-disk restart area. With an on-disk
log_clients of 410 the product 410 * 160 = 65600; adding ca_ofs and
storing into the u16 ra_len truncates modulo 65536 (e.g. ca_ofs 64
gives ra_len 128), so the "fits in the page" check passes even though
the client array described by log_clients extends far beyond the page.
ntfs_check_log_client_array() then walks the array bounded only by the
on-disk log_clients count:
cr = ca + idx;
if (cr->prev_client != LOGFILE_NO_CLIENT) ...
For log_clients 410 it dereferences records up to ca + 409 * 160,
~64 KiB past the kvzalloc(system_page_size) restart-page buffer -- an
out-of-bounds read of attacker-controlled extent, reachable when a
crafted NTFS image is mounted (load_and_check_logfile() at mount time).
This is the in-kernel analogue of CVE-2022-30789, fixed in the ntfs-3g
userspace driver but never in this revived classic driver.
Compute the restart-area length in a u32 so the existing bounds check
rejects an over-large client array instead of being defeated by the
truncation. Widen ra_ofs and ca_ofs to u32 as well: both are loaded
from __le16 on-disk fields and every comparison already promotes to
int/size_t, so this changes no result and keeps the declaration uniform. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix OOB in scmi_power_name_get()
scmi_power_name_get() does not validate the domain number passed by the
external caller, which may lead to an out-of-bounds access.
Fix this by returning "unknown" for invalid domains, like
scmi_reset_name_get() does. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: acquire ARP hw source only after skb realloc
The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer
behind the skb. Variables which were pointing to the old buffer need to be
reassigned to avoid an use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound the look-ahead attribute-list entry in ntfs_external_attr_find()
When resolving an attribute lookup with a non-zero @lowest_vcn,
ntfs_external_attr_find() peeks at the next $ATTRIBUTE_LIST entry to
decide whether to keep searching, but bounds that not-yet-validated
entry only with "(u8 *)next_al_entry + 6 < al_end" (which proves just
bytes 0..6 are in range) and "(u8 *)next_al_entry + length <= al_end"
with an attacker-controlled, non-8-aligned length. It then reads
next_al_entry->lowest_vcn (an __le64 at offset 8) and the name at
next_al_entry->name_offset, both of which can lie past al_end -- the
exact end of the kvmalloc'd attribute-list buffer (allocated at the
on-disk attr_list_size, no rounding). A crafted on-disk $ATTRIBUTE_LIST
whose last entry sits a few bytes before al_end therefore yields a slab
out-of-bounds read when the inode is read.
Validate the look-ahead entry with ntfs_attr_list_entry_is_valid() (added
in patch 1/3) before dereferencing lowest_vcn and the name, so the same
fixed-header, length and name bounds the main attribute-list walk uses now
guard this read too. |
| Out of bounds read in V8 in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions 3.3.0 through 3.3.12 and 3.4.0 through 3.4.13 contain a heap buffer overflow in PyOpenEXR triggered by a channel-name key collision between literal and prefixed RGB channels. When separate_channels=false, PyOpenEXR maps each physical channel name through channelNameToRGBA() and coalesces the results into a shared RGB array. A crafted flat scanline EXR that contains both a literal channel such as left and prefixed channels such as left.R, left.G, and left.B causes these names to collide, so the wrapper reuses an undersized two-dimensional NumPy array for the coalesced RGB slices and writes out of bounds when OpenEXR.File(path) decodes the pixels. This issue is fixed in versions 3.3.13 and 3.4.14. |
| OpenEXR is the reference implementation and specification for the EXR image file format, widely used in the motion picture industry. In versions through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13, the OpenEXRUtil library returns an out-of-bounds pointer from the SampleCountChannel::row() API when a deep image has a non-zero dataWindow origin. The row() accessor is documented as 0-based and computes its address from an internal base that is offset for absolute pixel coordinates, so the two coordinate models conflict whenever dataWindow.min is non-zero. For a deep image whose data window has a large negative vertical origin, row(0) points far outside the allocated sample-count buffer. An application that opens an attacker-controlled deep EXR file and accesses sample counts through row() performs an out-of-bounds read, which can crash the process or, under a controlled heap layout, return adjacent heap memory as sample-count values. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14. |
| Compliance-trestle (Trestle) is a Python SDK and command-line tool for managing OSCAL compliance documents. In versions prior to 3.12.4 and 4.0.0 through 4.0.3, the custom Jinja2 include tags mdsection_include and md_clean_include re-parse the content of an included Markdown file as Jinja2 template code in a non-sandboxed environment, allowing server-side template injection that can lead to arbitrary code execution. The MDSectionInclude and MDCleanInclude tags in Trestle/core/jinja/tags.py pass included file content to Parser(self.environment, ...).parse(), splicing it into the host template's compilation, and the environment is a plain jinja2.Environment rather than a SandboxedEnvironment, so any expressions in the file are evaluated with full access to the usual SSTI gadget chain. Because Trestle's Markdown writers emit OSCAL prose and component-description fields verbatim, applying delimiter neutralization only to parameter tables, attacker-controlled OSCAL data such as a control statement, part prose, or component description containing Jinja2 syntax flows into an included Markdown file and is executed when the include tag re-parses it. This issue is fixed in version 4.1.0. |
| eml_parser serves as a python module for parsing eml files and returning various information found in the e-mail as well as computed information. Prior to 3.0.2, the clean_found_uri function in eml_parser/parser.py validates potential URL strings before unescaping HTML entities used for colon, slash, or period characters. Valid encoded URLs and their host names are therefore rejected and omitted from the extracted URL and domain lists. Email security gateways and SOC pipelines that use those lists as indicators of compromise may fail to submit the hidden URLs to threat intelligence feeds, reputation services, or sandboxes, allowing malicious links to bypass inspection. This issue is fixed in version 3.0.2. |
| A stack overflow in the loadRawData function of SpaceDot AcubeSAT OBC software commit eaf90ec allows attackers to cause a Denial of Service (DoS) via supplying a crafted ECSS TC message. |
| An out-of-bounds read vulnerability in the CAN::Application::parsePerformFunctionMessage component of SpaceDot AcubeSAT OBC software commit eaf90ec allows attackers to cause a Denial of Service (DoS) via supplying a crafted CAN message. |
| An integer overflow in the SMF component of Open5GS v2.7.6 allows attackers to cause a Denial of Service (DoS) via supplying a crafted GTP packet. |
| Yamcs is a mission control framework. Prior to 5.12.8 and 5.13.2, Yamcs inserts templateArgs from POST /api/instances and PATCH /api/instances/{instance} into YAML through VarStatement.append in yamcs-core/src/main/java/org/yamcs/templating/VarStatement.java without YAML-context escaping. The rendered configuration is parsed by YamcsServer.createInstance and loaded by YamcsServerInstance, allowing an attacker to inject a services entry for org.yamcs.ProcessRunner. Deployments without security.yaml expose the operation through the guest superuser, while secured deployments require SystemPrivilege.CreateInstances. Successful exploitation executes commands as the Yamcs service account. This issue is fixed in versions 5.12.8 and 5.13.2. |
| C12.22 protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service |
| SAP S/4HANA (Private Cloud) uses a third-party component that contains a Regular Expression Denial of Service (ReDoS) vulnerability. An unauthenticated attacker could supply specially crafted input that triggers excessive processing within the affected functionality. Successful exploitation could exhaust system resources and make the service unavailable, resulting in a high impact on availability. There is no impact on confidentiality and integrity. |
| Doorkeeper is an OAuth 2 provider for Ruby on Rails. In version 1.9.0, an attacker who knows only a dynamically registered client's client_id, which is public information, can authenticate as that client at the token endpoint and obtain an access token without providing its client_secret. This occurs because the Dynamic Client Registration feature creates applications with confidential: false hard-coded, even though the registration response returns a client_secret and advertises support for the client_secret_basic and client_secret_post authentication methods; since Doorkeeper treats a blank or missing secret as valid for non-confidential (public) clients, the secret is never verified. Only projects that have explicitly enabled Dynamic Client Registration, which is disabled by default, are affected. This issue is fixed in version 1.10.0. |
