| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Netty is a network application framework for development of protocol servers and clients. In netty-handler prior to versions 4.1.135.Final and 4.2.15.Final, an attacker can bypass IPv6 subnet rules due to an incorrect masking operation in IpSubnetFilterRule.compareTo(). Valid public IP addresses can bypass the restrictions. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| Postfix before 3.8.16, 3.9 before 3.9.10, and 3.10 before 3.10.9 sometimes allows a buffer over-read and process crash via an enhanced status code that lacks text after the third number. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach()
Sashiko AI-review observed:
In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet
where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2
and passed to icmp6_send(), it uses IP6CB(skb2).
IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso
offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm
at offset 18.
If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao
would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called
and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO).
This would scan the inner, attacker-controlled IPv6 packet starting at that
offset, potentially returning a fake TLV without checking if the remaining
packet length can hold the full 18-byte struct ipv6_destopt_hao.
Could mip6_addr_swap() then perform a 16-byte swap that extends past the end
of the packet data into skb_shared_info?
Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and
ip6ip6_err() to prevent this?
This patch implements the first suggestion.
I am not sure if ip6ip6_err() needs to be changed.
A separate patch would be better anyway. |
| Prometheus is an open-source monitoring system and time series database. Prior to versions 3.5.3 and 3.11.3, the client_secret field in the Azure AD remote write OAuth configuration (storage/remote/azuread) was typed as string instead of Secret. Prometheus redacts fields of type Secret when serving the configuration via the /-/config HTTP API endpoint. Because the field was a plain string, the Azure OAuth client secret was exposed in plaintext to any user or process with access to that endpoint. This issue has been patched in versions 3.5.3 and 3.11.3. |
| BIND servers that are configured to use TKEY-based authentication via GSS-API tokens are vulnerable to excessive memory consumption when receiving and processing maliciously-constructed packets. Typically these servers will be found in Active Directory integrated DNS deployments and/or Kerberos-secured DNS environments.
This issue affects BIND 9 versions 9.0.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.9.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1. |
| Improper validation of symbolic links in the Pack Git import feature in Cribl Stream before 4.18.2 allows a remote authenticated attacker with Pack import and pipeline preview permissions to execute arbitrary code as the Cribl server process via a crafted Git repository containing a symbolic link in the pack's functions directory. |
| Improper control of generation of code in the JSON Pointer-to-accessor compiler in Cribl Stream before 4.18.2 allows a remote authenticated attacker with edit privileges to execute arbitrary JavaScript on the server via a crafted database connection identifier or pack configuration value. |
| pip would incorrectly handle doubly-encoded package URLs from indexes allowing for files to be installed to arbitrary locations on disk even when installing wheels.
This vulnerability requires downloading or installing a package from a malicious package index to succeed, malicious packages alone are not able to exploit this vulnerability. Note that this vulnerability only materially impacts users running `pip download` with the `--only-binary` option as installing source distributions from an untrusted index is already an unsafe operation that executes code during install time. |
| GIMP HDR File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of HDR files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28266. |
| Impact:
The undici WebSocket client enforces maxPayloadSize on the cumulative byte count of fragments in a message but does not enforce a limit on the number of fragments. A malicious WebSocket server can stream many small or empty continuation frames that each pass per-frame and cumulative-size validation, collectively causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.
Affected applications are those using the undici WebSocket client (new WebSocket(...)) or the WebSocketStream API that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.
All releases starting at undici 6.17.0 are affected.
Patches: Upgrade to undici >= 6.26.0, >= 7.28.0, or >= 8.5.0. Workarounds:
No workaround is available. The fix must be applied through an upgrade. |
| The net/url package does not set a limit on the number of query parameters in a query. While the maximum size of query parameters in URLs is generally limited by the maximum request header size, the net/http.Request.ParseForm method can parse large URL-encoded forms. Parsing a large form containing many unique query parameters can cause excessive memory consumption. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, rpc_client_recv_fragment in libfreerdp/core/gateway/rpc_client.c ensures the response reassembly stream capacity using only the server-declared alloc_hint rather than the actual StubLength about to be written. A malicious TS Gateway can send a PTYPE_RESPONSE with a small alloc_hint and a much larger frag_length, causing Stream_Write to copy attacker-controlled stub data beyond the 4096-byte pdu->s buffer. This can crash the client and may permit code execution through heap corruption. This issue is fixed in version 3.27.0. |
| Integer wraparound in IVFFlat index build in pgvector before 0.8.6 allows a database user to write data out-of-bounds, which could lead to arbitrary code execution. Only 32-bit systems are affected. |
| HCL Connections is vulnerable to information disclosure which could allow a user to obtain sensitive information they are not entitled to, caused by improper handling of request data.they are not entitled to, caused by improper handling of request data. |
| n8n-workflows Main Commit ee25413 allows attackers to execute a directory traversal via the download_workflow function within api_server.py |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: Imperative Web Server). The supported version that is affected is 3.2.18. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks of this vulnerability can result in takeover of Helidon. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| The Simple File List WordPress plugin through 6.3.11 does not validate the source path of a file-move operation reachable by unauthenticated users, allowing them to read arbitrary files on the server and to relocate critical files out of the web root, leading to sensitive information disclosure and potential site takeover. |
| The SmartCrawl SEO checker, analyzer & optimizer WordPress plugin before 3.16.3 does not perform capability checks on two of its AJAX actions, allowing users with at least the Subscriber role to read the titles of private and draft posts by ID and to enumerate stored post-meta key names. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, freerdp_dsp_decode_opus in libfreerdp/codec/dsp.c calls Stream_EnsureRemainingCapacity on context->common.buffer even though opus_decode writes decoded PCM into the caller-supplied out stream. A malicious RDP server that negotiates WAVE_FORMAT_OPUS with a client built with WITH_OPUS enabled and WITH_DSP_FFMPEG disabled can make libopus write a large decoded frame beyond the 4096-byte StreamPool_Take destination used by channels/rdpsnd/client/rdpsnd_main.c. This can corrupt the client heap, crash the client, and may permit code execution. This issue is fixed in version 3.28.0. |
| An endpoint in HCL Connections is vulnerable to information disclosure. In certain scenarios this might lead to disclosing sensitive information to unauthorized users. |
