| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Juniper ScreenOS before 6.3.0r21, when ssh-pka is configured and enabled, allows remote attackers to cause a denial of service (system crash) or execute arbitrary code via crafted SSH negotiation. |
| Juniper Junos OS 14.1X53 before 14.1X53-D30 on QFX Series switches allows remote attackers to cause a denial of service (PFE panic) via a high rate of unspecified VXLAN packets. |
| named in ISC BIND 9.x before 9.9.8-P4 and 9.10.x before 9.10.3-P4 allows remote attackers to cause a denial of service (assertion failure and daemon exit) via a crafted signature record for a DNAME record, related to db.c and resolver.c. |
| PKId in Juniper Junos OS before 12.1X44-D52, 12.1X46 before 12.1X46-D37, 12.1X47 before 12.1X47-D30, 12.3 before 12.3R12, 12.3X48 before 12.3X48-D20, 13.3 before 13.3R10, 14.1 before 14.1R8, 14.1X53 before 14.1X53-D40, 14.2 before 14.2R7, 15.1 before 15.1R4, 15.1X49 before 15.1X49-D20, 15.1X53 before 15.1X53-D60, and 16.1 before 16.1R1 allow remote attackers to bypass an intended certificate validation mechanism via a self-signed certificate with an Issuer name that matches a valid CA certificate enrolled in Junos. |
| The Juniper Networks NetScreen Firewall devices with ScreenOS before 6.3r17, when configured to use the internal DNS lookup client, allows remote attackers to cause a denial of service (crash and reboot) via a sequence of malformed packets to the device IP. |
| Unspecified vulnerability in the Juniper Networks NetScreen Firewall products with ScreenOS before 6.3r17, when configured to use the internal DNS lookup client, allows remote attackers to cause a denial of service (crash and reboot) via vectors related to a DNS lookup. |
| Juniper Junos OS before 13.3R9, 14.1R6 before 14.1R6-S1, and 14.1 before 14.1R7, when configured with VPLS routing-instances, allows remote attackers to obtain sensitive mbuf information by injecting a flood of Ethernet frames with IPv6 MAC addresses directly into a connected interface. |
| Heap-based buffer overflow in the PCNET controller in QEMU allows remote attackers to execute arbitrary code by sending a packet with TXSTATUS_STARTPACKET set and then a crafted packet with TXSTATUS_DEVICEOWNS set. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on SRX Series, and MX Series with SPC3 allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When an affected device receives specific valid TCP traffic, the pfe crashes and restarts leading to a momentary but complete service outage.
This issue affects Junos OS:
21.2 releases from 21.2R3-S5 before 21.2R3-S6.
This issue does not affect earlier or later releases. |
| A Use After Free vulnerability in command processing of Juniper Networks Junos OS on MX Series allows a local, authenticated attacker to cause the broadband edge service manager daemon (bbe-smgd) to crash upon execution of specific CLI commands, creating a Denial of Service (DoS) condition. The process crashes and restarts automatically.
When specific CLI commands are executed, the bbe-smgd daemon attempts to write into an area of memory (mgd socket) that was already closed, causing the process to crash. This process manages and controls the configuration of broadband subscriber sessions and services. While the process is unavailable, additional subscribers will not be able to connect to the device, causing a temporary Denial of Service condition.
This issue only occurs if Graceful Routing Engine Switchover (GRES) and Subscriber Management are enabled.
This issue affects Junos OS:
* All versions before 20.4R3-S5,
* from 21.1 before 21.1R3-S4,
* from 21.2 before 21.2R3-S3,
* from 21.3 before 21.3R3-S5,
* from 21.4 before 21.4R3-S5,
* from 22.1 before 22.1R3,
* from 22.2 before 22.2R3,
* from 22.3 before 22.3R2; |
| A Missing Release of Memory after Effective Lifetime vulnerability in Juniper Networks Junos OS on MX Series allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS).
In a subscriber management scenario continuous subscriber logins will trigger a memory leak and eventually lead to an FPC crash and restart.
This issue affects Junos OS on MX Series:
* All version before 21.2R3-S6,
* 21.4 versions before 21.4R3-S6,
* 22.1 versions before 22.1R3-S5,
* 22.2 versions before 22.2R3-S3,
* 22.3 versions before 22.3R3-S2,
* 22.4 versions before 22.4R3,
* 23.2 versions before 23.2R2. |
| A Missing Authentication for Critical Function vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated network-based attacker to cause limited impact to the integrity or availability of the device.
If a device is configured with IPsec authentication algorithm hmac-sha-384 or hmac-sha-512, tunnels are established normally but for traffic traversing the tunnel no authentication information is sent with the encrypted data on egress, and no authentication information is expected on ingress. So if the peer is an unaffected device transit traffic is going to fail in both directions. If the peer is an also affected device transit traffic works, but without authentication, and configuration and CLI operational commands indicate authentication is performed.
This issue affects Junos OS:
* All versions before 20.4R3-S7,
* 21.1 versions before 21.1R3,
* 21.2 versions before 21.2R2-S1, 21.2R3,
* 21.3 versions before 21.3R1-S2, 21.3R2. |
| Juniper Junos Space before 13.1R1.6, as used on the JA1500 appliance and in other contexts, does not properly implement role-based access control, which allows remote authenticated users to modify the configuration by leveraging the read-only privilege, aka PR 863804. |
| jsdm/ajax/port.php in J-Web in Juniper Junos before 10.4R13, 11.4 before 11.4R7, 12.1 before 12.1R5, 12.2 before 12.2R3, and 12.3 before 12.3R1 allows remote authenticated users to execute arbitrary commands via the rsargs parameter in an exec action. |
| flowd in Juniper Junos 10.4 before 10.4R11 on SRX devices, when the MSRPC Application Layer Gateway (ALG) is enabled, allows remote attackers to cause a denial of service (daemon crash) via crafted MSRPC requests, aka PR 772834. |
| Buffer overflow in the flow daemon (flowd) in Juniper Junos 10.4 before 10.4S14, 11.4 before 11.4R7-S2, 12.1.X44 before 12.1X44-D15, 12.1X45 before 12.1X45-D10 on SRX devices, when using telnet pass-through authentication on the firewall, might allow remote attackers to execute arbitrary code via a crafted telnet message. |
| Juniper Junos 12.1X44 before 12.1.X44-D20 and 12.1X45 before 12.1X45-D15, when the no-validate option is enabled, does not properly handle configuration validation errors during the config commit phase of the boot-up sequence, which allows remote attackers to bypass authentication via unspecified vectors. |
| Cross-site scripting (XSS) vulnerability in Appliance Configuration Manager (ACM) in Juniper IDP 4.1 before 4.1r3 and 4.2 before 4.2r1 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors. |
| Cross-site scripting (XSS) vulnerability in dana/nc/ncrun.cgi in Juniper Networks IVE 6.5R1 (Build 14599) and 6.5R2 (Build 14951) allows remote attackers to inject arbitrary web script or HTML via the DSSignInURL cookie. |
| Open redirect vulnerability in dana/home/homepage.cgi in Juniper Networks IVE 6.5R1 (Build 14599) and 6.5R2 (Build 14951) allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via a URL in the Location parameter. |
