| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change
rfcomm_sk_state_change attempts to use sock_lock so it must never be
called with it locked but rfcomm_sock_ioctl always attempt to lock it
causing the following trace:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted
------------------------------------------------------
syz-executor386/5093 is trying to acquire lock:
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline]
ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73
but task is already holding lock:
ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491 |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix macvlan leak by synchronizing access to mac_filter_hash
This patch addresses a macvlan leak issue in the i40e driver caused by
concurrent access to vsi->mac_filter_hash. The leak occurs when multiple
threads attempt to modify the mac_filter_hash simultaneously, leading to
inconsistent state and potential memory leaks.
To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing
vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock),
ensuring atomic operations and preventing concurrent access.
Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in
i40e_add_mac_filter() to help catch similar issues in the future.
Reproduction steps:
1. Spawn VFs and configure port vlan on them.
2. Trigger concurrent macvlan operations (e.g., adding and deleting
portvlan and/or mac filters).
3. Observe the potential memory leak and inconsistent state in the
mac_filter_hash.
This synchronization ensures the integrity of the mac_filter_hash and prevents
the described leak. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Do not bring the device up after non-fatal error
Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal")
changed igb_io_error_detected() to ignore non-fatal pcie errors in order
to avoid hung task that can happen when igb_down() is called multiple
times. This caused an issue when processing transient non-fatal errors.
igb_io_resume(), which is called after igb_io_error_detected(), assumes
that device is brought down by igb_io_error_detected() if the interface
is up. This resulted in panic with stacktrace below.
[ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down
[ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0
[ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
[ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000
[ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000
[ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message
[ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported.
[ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message
[ T292] pcieport 0000:00:1c.5: AER: broadcast resume message
[ T292] ------------[ cut here ]------------
[ T292] kernel BUG at net/core/dev.c:6539!
[ T292] invalid opcode: 0000 [#1] PREEMPT SMP
[ T292] RIP: 0010:napi_enable+0x37/0x40
[ T292] Call Trace:
[ T292] <TASK>
[ T292] ? die+0x33/0x90
[ T292] ? do_trap+0xdc/0x110
[ T292] ? napi_enable+0x37/0x40
[ T292] ? do_error_trap+0x70/0xb0
[ T292] ? napi_enable+0x37/0x40
[ T292] ? napi_enable+0x37/0x40
[ T292] ? exc_invalid_op+0x4e/0x70
[ T292] ? napi_enable+0x37/0x40
[ T292] ? asm_exc_invalid_op+0x16/0x20
[ T292] ? napi_enable+0x37/0x40
[ T292] igb_up+0x41/0x150
[ T292] igb_io_resume+0x25/0x70
[ T292] report_resume+0x54/0x70
[ T292] ? report_frozen_detected+0x20/0x20
[ T292] pci_walk_bus+0x6c/0x90
[ T292] ? aer_print_port_info+0xa0/0xa0
[ T292] pcie_do_recovery+0x22f/0x380
[ T292] aer_process_err_devices+0x110/0x160
[ T292] aer_isr+0x1c1/0x1e0
[ T292] ? disable_irq_nosync+0x10/0x10
[ T292] irq_thread_fn+0x1a/0x60
[ T292] irq_thread+0xe3/0x1a0
[ T292] ? irq_set_affinity_notifier+0x120/0x120
[ T292] ? irq_affinity_notify+0x100/0x100
[ T292] kthread+0xe2/0x110
[ T292] ? kthread_complete_and_exit+0x20/0x20
[ T292] ret_from_fork+0x2d/0x50
[ T292] ? kthread_complete_and_exit+0x20/0x20
[ T292] ret_from_fork_asm+0x11/0x20
[ T292] </TASK>
To fix this issue igb_io_resume() checks if the interface is running and
the device is not down this means igb_io_error_detected() did not bring
the device down and there is no need to bring it up. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: accept TCA_STAB only for root qdisc
Most qdiscs maintain their backlog using qdisc_pkt_len(skb)
on the assumption it is invariant between the enqueue()
and dequeue() handlers.
Unfortunately syzbot can crash a host rather easily using
a TBF + SFQ combination, with an STAB on SFQ [1]
We can't support TCA_STAB on arbitrary level, this would
require to maintain per-qdisc storage.
[1]
[ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 88.798611] #PF: supervisor read access in kernel mode
[ 88.799014] #PF: error_code(0x0000) - not-present page
[ 88.799506] PGD 0 P4D 0
[ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI
[ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117
[ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq
[ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00
All code
========
0: 0f b7 50 12 movzwl 0x12(%rax),%edx
4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax
b: 00
c: 48 89 d6 mov %rdx,%rsi
f: 48 29 d0 sub %rdx,%rax
12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx
19: 48 c1 e0 03 shl $0x3,%rax
1d: 48 01 c2 add %rax,%rdx
20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx)
25: 7e c0 jle 0xffffffffffffffe7
27: 48 8b 3a mov (%rdx),%rdi
2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction
2d: 4c 89 02 mov %r8,(%rdx)
30: 49 89 50 08 mov %rdx,0x8(%r8)
34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi)
3b: 00
3c: 48 rex.W
3d: c7 .byte 0xc7
3e: 07 (bad)
...
Code starting with the faulting instruction
===========================================
0: 4c 8b 07 mov (%rdi),%r8
3: 4c 89 02 mov %r8,(%rdx)
6: 49 89 50 08 mov %rdx,0x8(%r8)
a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi)
11: 00
12: 48 rex.W
13: c7 .byte 0xc7
14: 07 (bad)
...
[ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206
[ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800
[ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000
[ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f
[ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140
[ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac
[ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000
[ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0
[ 88.808165] Call Trace:
[ 88.808459] <TASK>
[ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434)
[ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715)
[ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539)
[ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
[ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq
[ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq
[ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_g
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xtables: avoid NFPROTO_UNSPEC where needed
syzbot managed to call xt_cluster match via ebtables:
WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780
[..]
ebt_do_table+0x174b/0x2a40
Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet
processing. As this is only useful to restrict locally terminating
TCP/UDP traffic, register this for ipv4 and ipv6 family only.
Pablo points out that this is a general issue, direct users of the
set/getsockopt interface can call into targets/matches that were only
intended for use with ip(6)tables.
Check all UNSPEC matches and targets for similar issues:
- matches and targets are fine except if they assume skb_network_header()
is valid -- this is only true when called from inet layer: ip(6) stack
pulls the ip/ipv6 header into linear data area.
- targets that return XT_CONTINUE or other xtables verdicts must be
restricted too, they are incompatbile with the ebtables traverser, e.g.
EBT_CONTINUE is a completely different value than XT_CONTINUE.
Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as
they are provided for use by ip(6)tables.
The MARK target is also used by arptables, so register for NFPROTO_ARP too.
While at it, bail out if connbytes fails to enable the corresponding
conntrack family.
This change passes the selftests in iptables.git. |
| In the Linux kernel, the following vulnerability has been resolved:
net: do not delay dst_entries_add() in dst_release()
dst_entries_add() uses per-cpu data that might be freed at netns
dismantle from ip6_route_net_exit() calling dst_entries_destroy()
Before ip6_route_net_exit() can be called, we release all
the dsts associated with this netns, via calls to dst_release(),
which waits an rcu grace period before calling dst_destroy()
dst_entries_add() use in dst_destroy() is racy, because
dst_entries_destroy() could have been called already.
Decrementing the number of dsts must happen sooner.
Notes:
1) in CONFIG_XFRM case, dst_destroy() can call
dst_release_immediate(child), this might also cause UAF
if the child does not have DST_NOCOUNT set.
IPSEC maintainers might take a look and see how to address this.
2) There is also discussion about removing this count of dst,
which might happen in future kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: fix ppp_async_encode() illegal access
syzbot reported an issue in ppp_async_encode() [1]
In this case, pppoe_sendmsg() is called with a zero size.
Then ppp_async_encode() is called with an empty skb.
BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline]
BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675
ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline]
ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675
ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634
ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline]
ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304
pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113
__release_sock+0x1da/0x330 net/core/sock.c:3072
release_sock+0x6b/0x250 net/core/sock.c:3626
pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4092 [inline]
slab_alloc_node mm/slub.c:4135 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1322 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732
pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f24c6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 |
| In the Linux kernel, the following vulnerability has been resolved:
slip: make slhc_remember() more robust against malicious packets
syzbot found that slhc_remember() was missing checks against
malicious packets [1].
slhc_remember() only checked the size of the packet was at least 20,
which is not good enough.
We need to make sure the packet includes the IPv4 and TCP header
that are supposed to be carried.
Add iph and th pointers to make the code more readable.
[1]
BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666
slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666
ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455
ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline]
ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212
ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327
pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379
sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113
__release_sock+0x1da/0x330 net/core/sock.c:3072
release_sock+0x6b/0x250 net/core/sock.c:3626
pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4091 [inline]
slab_alloc_node mm/slub.c:4134 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1322 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732
pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:744
____sys_sendmsg+0x903/0xb60 net/socket.c:2602
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656
__sys_sendmmsg+0x3c1/0x960 net/socket.c:2742
__do_sys_sendmmsg net/socket.c:2771 [inline]
__se_sys_sendmmsg net/socket.c:2768 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768
x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2389e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Stop the active perfmon before being destroyed
When running `kmscube` with one or more performance monitors enabled
via `GALLIUM_HUD`, the following kernel panic can occur:
[ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4
[ 55.008368] Mem abort info:
[ 55.008377] ESR = 0x0000000096000005
[ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits
[ 55.008402] SET = 0, FnV = 0
[ 55.008412] EA = 0, S1PTW = 0
[ 55.008421] FSC = 0x05: level 1 translation fault
[ 55.008434] Data abort info:
[ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000
[ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper
gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb
drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight
[ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1
[ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608
[ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608
[ 55.008895] sp : ffffffc080673cf0
[ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28
[ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148
[ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38
[ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000
[ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90
[ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0
[ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04
[ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857
[ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470
[ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470
[ 55.013292] Call trace:
[ 55.013959] __mutex_lock.constprop.0+0x90/0x608
[ 55.014646] __mutex_lock_slowpath+0x1c/0x30
[ 55.015317] mutex_lock+0x50/0x68
[ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d]
[ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d]
[ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched]
[ 55.017921] kthread+0x11c/0x128
[ 55.018554] ret_from_fork+0x10/0x20
[ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401)
[ 55.019776] ---[ end trace 0000000000000000 ]---
[ 55.020411] note: v3d_bin[166] exited with preempt_count 1
This issue arises because, upon closing the file descriptor (which happens
when we interrupt `kmscube`), the active performance monitor is not
stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`,
the active performance monitor's pointer (`v3d->active_perfmon`) is still
retained.
If `kmscube` is run again, the driver will attempt to stop the active
performance monitor using the stale pointer in `v3d->active_perfmon`.
However, this pointer is no longer valid because the previous process has
already terminated, and all performance monitors associated with it have
been destroyed and freed.
To fix this, when the active performance monitor belongs to a given
process, explicitly stop it before destroying and freeing it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: wd33c93: Don't use stale scsi_pointer value
A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93:
Move the SCSI pointer to private command data") which results in an oops
in wd33c93_intr(). That commit added the scsi_pointer variable and
initialized it from hostdata->connected. However, during selection,
hostdata->connected is not yet valid. Fix this by getting the current
scsi_pointer from hostdata->selecting. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Fix an unsafe loop on the list
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list. |
| In the Linux kernel, the following vulnerability has been resolved:
device-dax: correct pgoff align in dax_set_mapping()
pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise,
vmf->address not aligned to fault_size will be aligned to the next
alignment, that can result in memory failure getting the wrong address.
It's a subtle situation that only can be observed in
page_mapped_in_vma() after the page is page fault handled by
dev_dax_huge_fault. Generally, there is little chance to perform
page_mapped_in_vma in dev-dax's page unless in specific error injection
to the dax device to trigger an MCE - memory-failure. In that case,
page_mapped_in_vma() will be triggered to determine which task is
accessing the failure address and kill that task in the end.
We used self-developed dax device (which is 2M aligned mapping) , to
perform error injection to random address. It turned out that error
injected to non-2M-aligned address was causing endless MCE until panic.
Because page_mapped_in_vma() kept resulting wrong address and the task
accessing the failure address was never killed properly:
[ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.049006] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.448042] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.792026] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.162502] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.461116] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.764730] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.042128] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.464293] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.818090] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3787.085297] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
It took us several weeks to pinpoint this problem, but we eventually
used bpftrace to trace the page fault and mce address and successfully
identified the issue.
Joao added:
; Likely we never reproduce in production because we always pin
: device-dax regions in the region align they provide (Qemu does
: similarly with prealloc in hugetlb/file backed memory). I think this
: bug requires that we touch *unpinned* device-dax regions unaligned to
: the device-dax selected alignment (page size i.e. 4K/2M/1G) |
| In the Linux kernel, the following vulnerability has been resolved:
kthread: unpark only parked kthread
Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.
However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.
As a result, calling kthread_stop() on an unparked per-cpu kthread
triggers such a warning:
WARNING: CPU: 0 PID: 11 at kernel/kthread.c:525 __kthread_bind_mask kernel/kthread.c:525
<TASK>
kthread_stop+0x17a/0x630 kernel/kthread.c:707
destroy_workqueue+0x136/0xc40 kernel/workqueue.c:5810
wg_destruct+0x1e2/0x2e0 drivers/net/wireguard/device.c:257
netdev_run_todo+0xe1a/0x1000 net/core/dev.c:10693
default_device_exit_batch+0xa14/0xa90 net/core/dev.c:11769
ops_exit_list net/core/net_namespace.c:178 [inline]
cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:640
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd70 kernel/workqueue.c:3393
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Fix this with skipping unecessary unparking while stopping a kthread. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: dax: fix overflowing extents beyond inode size when partially writing
The dax_iomap_rw() does two things in each iteration: map written blocks
and copy user data to blocks. If the process is killed by user(See signal
handling in dax_iomap_iter()), the copied data will be returned and added
on inode size, which means that the length of written extents may exceed
the inode size, then fsck will fail. An example is given as:
dd if=/dev/urandom of=file bs=4M count=1
dax_iomap_rw
iomap_iter // round 1
ext4_iomap_begin
ext4_iomap_alloc // allocate 0~2M extents(written flag)
dax_iomap_iter // copy 2M data
iomap_iter // round 2
iomap_iter_advance
iter->pos += iter->processed // iter->pos = 2M
ext4_iomap_begin
ext4_iomap_alloc // allocate 2~4M extents(written flag)
dax_iomap_iter
fatal_signal_pending
done = iter->pos - iocb->ki_pos // done = 2M
ext4_handle_inode_extension
ext4_update_inode_size // inode size = 2M
fsck reports: Inode 13, i_size is 2097152, should be 4194304. Fix?
Fix the problem by truncating extents if the written length is smaller
than expected. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix memory leak in exfat_load_bitmap()
If the first directory entry in the root directory is not a bitmap
directory entry, 'bh' will not be released and reassigned, which
will cause a memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Avoid a bad reference count on CPU node
In the parse_perf_domain function, if the call to
of_parse_phandle_with_args returns an error, then the reference to the
CPU device node that was acquired at the start of the function would not
be properly decremented.
Address this by declaring the variable with the __free(device_node)
cleanup attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix system hang while resume with TBT monitor
[Why]
Connected with a Thunderbolt monitor and do the suspend and the system
may hang while resume.
The TBT monitor HPD will be triggered during the resume procedure
and call the drm_client_modeset_probe() while
struct drm_connector connector->dev->master is NULL.
It will mess up the pipe topology after resume.
[How]
Skip the TBT monitor HPD during the resume procedure because we
currently will probe the connectors after resume by default.
(cherry picked from commit 453f86a26945207a16b8f66aaed5962dc2b95b85) |
| In the Linux kernel, the following vulnerability has been resolved:
static_call: Handle module init failure correctly in static_call_del_module()
Module insertion invokes static_call_add_module() to initialize the static
calls in a module. static_call_add_module() invokes __static_call_init(),
which allocates a struct static_call_mod to either encapsulate the built-in
static call sites of the associated key into it so further modules can be
added or to append the module to the module chain.
If that allocation fails the function returns with an error code and the
module core invokes static_call_del_module() to clean up eventually added
static_call_mod entries.
This works correctly, when all keys used by the module were converted over
to a module chain before the failure. If not then static_call_del_module()
causes a #GP as it blindly assumes that key::mods points to a valid struct
static_call_mod.
The problem is that key::mods is not a individual struct member of struct
static_call_key, it's part of a union to save space:
union {
/* bit 0: 0 = mods, 1 = sites */
unsigned long type;
struct static_call_mod *mods;
struct static_call_site *sites;
};
key::sites is a pointer to the list of built-in usage sites of the static
call. The type of the pointer is differentiated by bit 0. A mods pointer
has the bit clear, the sites pointer has the bit set.
As static_call_del_module() blidly assumes that the pointer is a valid
static_call_mod type, it fails to check for this failure case and
dereferences the pointer to the list of built-in call sites, which is
obviously bogus.
Cure it by checking whether the key has a sites or a mods pointer.
If it's a sites pointer then the key is not to be touched. As the sites are
walked in the same order as in __static_call_init() the site walk can be
terminated because all subsequent sites have not been touched by the init
code due to the error exit.
If it was converted before the allocation fail, then the inner loop which
searches for a module match will find nothing.
A fail in the second allocation in __static_call_init() is harmless and
does not require special treatment. The first allocation succeeded and
converted the key to a module chain. That first entry has mod::mod == NULL
and mod::next == NULL, so the inner loop of static_call_del_module() will
neither find a module match nor a module chain. The next site in the walk
was either already converted, but can't match the module, or it will exit
the outer loop because it has a static_call_site pointer and not a
static_call_mod pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix error path in multi-packet WQE transmit
Remove the erroneous unmap in case no DMA mapping was established
The multi-packet WQE transmit code attempts to obtain a DMA mapping for
the skb. This could fail, e.g. under memory pressure, when the IOMMU
driver just can't allocate more memory for page tables. While the code
tries to handle this in the path below the err_unmap label it erroneously
unmaps one entry from the sq's FIFO list of active mappings. Since the
current map attempt failed this unmap is removing some random DMA mapping
that might still be required. If the PCI function now presents that IOVA,
the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI
function in error state.
The erroneous behavior was seen in a stress-test environment that created
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix NULL deref in mlx5e_tir_builder_alloc()
In mlx5e_tir_builder_alloc() kvzalloc() may return NULL
which is dereferenced on the next line in a reference
to the modify field.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
