| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp: Fix OOB read when handling Post Cursor2 register
The link_status array was not large enough to read the Adjust Request
Post Cursor2 register, so remove the common helper function to avoid
an OOB read, found with a -Warray-bounds build:
drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_get_adjust_request_post_cursor':
drivers/gpu/drm/drm_dp_helper.c:59:27: error: array subscript 10 is outside array bounds of 'const u8[6]' {aka 'const unsigned char[6]'} [-Werror=array-bounds]
59 | return link_status[r - DP_LANE0_1_STATUS];
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/drm_dp_helper.c:147:51: note: while referencing 'link_status'
147 | u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE],
| ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replace the only user of the helper with an open-coded fetch and decode,
similar to drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: visconti: prevent array overflow in visconti_clk_register_gates()
This code was using -1 to represent that there was no reset function.
Unfortunately, the -1 was stored in u8 so the if (clks[i].rs_id >= 0)
condition was always true. This lead to an out of bounds access in
visconti_clk_register_gates(). |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix KASAN slab-out-of-bounds in cachefiles_set_volume_xattr
Use the actual length of volume coherency data when setting the
xattr to avoid the following KASAN report.
BUG: KASAN: slab-out-of-bounds in cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles]
Write of size 4 at addr ffff888101e02af4 by task kworker/6:0/1347
CPU: 6 PID: 1347 Comm: kworker/6:0 Kdump: loaded Not tainted 5.18.0-rc1-nfs-fscache-netfs+ #13
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014
Workqueue: events fscache_create_volume_work [fscache]
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x5a
print_report.cold+0x5e/0x5db
? __lock_text_start+0x8/0x8
? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles]
kasan_report+0xab/0x120
? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles]
kasan_check_range+0xf5/0x1d0
memcpy+0x39/0x60
cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles]
cachefiles_acquire_volume+0x2be/0x500 [cachefiles]
? __cachefiles_free_volume+0x90/0x90 [cachefiles]
fscache_create_volume_work+0x68/0x160 [fscache]
process_one_work+0x3b7/0x6a0
worker_thread+0x2c4/0x650
? process_one_work+0x6a0/0x6a0
kthread+0x16c/0x1a0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Allocated by task 1347:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
cachefiles_set_volume_xattr+0x76/0x350 [cachefiles]
cachefiles_acquire_volume+0x2be/0x500 [cachefiles]
fscache_create_volume_work+0x68/0x160 [fscache]
process_one_work+0x3b7/0x6a0
worker_thread+0x2c4/0x650
kthread+0x16c/0x1a0
ret_from_fork+0x22/0x30
The buggy address belongs to the object at ffff888101e02af0
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 4 bytes inside of
8-byte region [ffff888101e02af0, ffff888101e02af8)
The buggy address belongs to the physical page:
page:00000000a2292d70 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x101e02
flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0000200 0000000000000000 dead000000000001 ffff888100042280
raw: 0000000000000000 0000000080660066 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888101e02980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc
ffff888101e02a00: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00
>ffff888101e02a80: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 04 fc
^
ffff888101e02b00: fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc
ffff888101e02b80: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kasan: Fix early region not updated correctly
The shadow's page table is not updated when PTE_RPN_SHIFT is 24
and PAGE_SHIFT is 12. It not only causes false positives but
also false negative as shown the following text.
Fix it by bringing the logic of kasan_early_shadow_page_entry here.
1. False Positive:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50
Write of size 16 at addr f57f3be0 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-12267-gdebe436e77c7 #1
Call Trace:
[c80d1c20] [c07fe7b8] dump_stack_lvl+0x4c/0x6c (unreliable)
[c80d1c40] [c02ff668] print_address_description.constprop.0+0x88/0x300
[c80d1c70] [c02ff45c] kasan_report+0x1ec/0x200
[c80d1cb0] [c0300b20] kasan_check_range+0x160/0x2f0
[c80d1cc0] [c03018a4] memset+0x34/0x90
[c80d1ce0] [c0280108] pcpu_alloc+0x508/0xa50
[c80d1d40] [c02fd7bc] __kmem_cache_create+0xfc/0x570
[c80d1d70] [c0283d64] kmem_cache_create_usercopy+0x274/0x3e0
[c80d1db0] [c2036580] init_sd+0xc4/0x1d0
[c80d1de0] [c00044a0] do_one_initcall+0xc0/0x33c
[c80d1eb0] [c2001624] kernel_init_freeable+0x2c8/0x384
[c80d1ef0] [c0004b14] kernel_init+0x24/0x170
[c80d1f10] [c001b26c] ret_from_kernel_thread+0x5c/0x64
Memory state around the buggy address:
f57f3a80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3b00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>f57f3b80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f57f3c00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3c80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
2. False Negative (with KASAN tests):
==================================================================
Before fix:
ok 45 - kmalloc_double_kzfree
# vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039
KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
not ok 46 - vmalloc_oob
not ok 1 - kasan
==================================================================
After fix:
ok 1 - kasan |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
Function ubifs_wbuf_write_nolock() may access buf out of bounds in
following process:
ubifs_wbuf_write_nolock():
aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096
if (aligned_len <= wbuf->avail) ... // Not satisfy
if (wbuf->used) {
ubifs_leb_write() // Fill some data in avail wbuf
len -= wbuf->avail; // len is still not 8-bytes aligned
aligned_len -= wbuf->avail;
}
n = aligned_len >> c->max_write_shift;
if (n) {
n <<= c->max_write_shift;
err = ubifs_leb_write(c, wbuf->lnum, buf + written,
wbuf->offs, n);
// n > len, read out of bounds less than 8(n-len) bytes
}
, which can be catched by KASAN:
=========================================================
BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0
Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call Trace:
kasan_report.cold+0x81/0x165
nand_write_page_swecc+0xa9/0x160
ubifs_leb_write+0xf2/0x1b0 [ubifs]
ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs]
write_head+0xdc/0x1c0 [ubifs]
ubifs_jnl_write_inode+0x627/0x960 [ubifs]
wb_workfn+0x8af/0xb80
Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8
bytes aligned, the 'len' represents the true length of buf (which is
allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so
ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully
to write leb safely.
Fetch a reproducer in [Link]. |
| D-Link DI-8100 16.07.26A1 is vulnerable to Buffer Overflow via the en`, `val and id parameters in the qj_asp function. This vulnerability allows authenticated attackers to cause a Denial of Service (DoS) by sending crafted GET requests with overly long values for these parameters. |
| D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 was discovered to contain a command injection vulnerability via the ping6 function. |
| alextselegidis Easy!Appointments v1.5.1 was discovered to contain a SQL injection vulnerability via the order_by parameter. |
| NVIDIA Megatron-LM for all platforms contains a vulnerability in a python component where an attacker may cause a code injection issue by providing a malicious file. A successful exploit of this vulnerability may lead to Code Execution, Escalation of Privileges, Information Disclosure and Data Tampering. |
| NVIDIA Megatron-LM for all platforms contains a vulnerability in a python component where an attacker may cause a code injection issue by providing a malicious file. A successful exploit of this vulnerability may lead to Code Execution, Escalation of Privileges, Information Disclosure and Data Tampering. |
| The unsafe globals in Picklescan before 0.0.25 do not include ssl. Consequently, ssl.get_server_certificate can exfiltrate data via DNS after deserialization. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-flakey: Fix memory corruption in optional corrupt_bio_byte feature
Fix memory corruption due to incorrect parameter being passed to bio_init |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_rbtree: skip end interval element from gc
rbtree lazy gc on insert might collect an end interval element that has
been just added in this transactions, skip end interval elements that
are not yet active. |
| E3 Site Supervisor Control (firmware version < 2.31F01) application services (MGW and RCI) uses client side hashing for authentication. An attacker can authenticate by obtaining only the password hash. |
| E3 Site Supervisor Control (firmware version < 2.31F01) has a floor plan feature that allows for an unauthenticated attacker to upload floor plan files. By uploading a specially crafted floor plan file, an attacker can access any file from the E3 file system. |
| E3 Site Supervisor Control (firmware version < 2.31F01) RCI service contains an API call to read users info, which returns all usernames and password hashes for the application services. |
| Deserialization of Untrusted Data vulnerability in PlexTrac (Runbooks modules) which allows Object Injection and arbitrary file writes.This issue affects PlexTrac: from 1.61.3 before 2.8.1. |
| E3 Site Supervisor Control (firmware version < 2.31F01) MGW contains an API call that lacks input validation. An attacker can use this command to continuously crash the application services. |
| Incorrect access control in eSoft Planner 3.24.08271-USA allow attackers to view all transactions performed by the company via supplying a crafted web request. |
| Mattermost versions 10.0.x <= 10.0.1, 10.1.x <= 10.1.1, 9.11.x <= 9.11.3, 9.5.x <= 9.5.11 fail to properly validate email addresses which allows an unauthenticated user to bypass email domain restrictions via carefully crafted input on email registration. |
