| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Memory Allocation with Excessive Size Value, Allocation of Resources Without Limits or Throttling, Missing Authentication for Critical Function vulnerability in Apache IoTDB.
When pipe_air_gap_receiver_enabled=true, the IoTDB AirGap pipe receiver
accepts raw TCP connections on port 9780 with no authentication. The
readLength method reads an attacker-controlled 32-bit integer from the
socket and readData passes it directly to new byte[length] with no
upper-bound check. An unauthenticated attacker can cause the JVM to attempt
an allocation of up to 2,147,483,647 bytes per connection, exhausting heap
memory and crashing or severely degrading the DataNode process.
This issue affects Apache IoTDB: from 1.0.0 before 2.0.10.
Users are recommended to upgrade to version 2.0.10, which fixes the issue. |
| An Out-of-bounds Write vulnerability in the http-gatekeeper (http-gk) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
If an SRX Series device is configured for remote-access VPN with pre-logon compliance check, a network-based attacker sending specifically formatted requests can trigger an out of bounds write leading to an http-gk process crash. This crash leads to unavailability of all services depending on the [ system services web-management ] configuration (like J-Web, remote access VPN and firewall authentication) until the process automatically restarts.
This issue affects Junos OS on SRX Series:
* 23.2 versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S4,
* 25.2 versions before 25.2R2,
* 25.4 versions before 25.4R1-S1, 25.4R2. |
| An Out-of-bounds Write vulnerability in the SNMP daemon (snmpd) of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated network-based attacker sending specific valid SNMPv3 queries to trigger a memory leak. Over time, continuous receipt of these queries will result in snmpd process memory exhaustion, resulting in a process crash and restart, impacting the ability to monitor the system via SNMP.
Memory usage can be monitored using the following command:
user@device> show system processes extensive | match snmpd
This issue affects:
Junos OS:
* all versions before 21.2R3-S8;
* from 21.4 before 21.4R3-S7;
* from 22.1 before 22.1R3-S6;
* from 22.2 before 22.2R3-S4;
* from 22.3 before 22.3R3-S3;
* from 22.4 before 22.4R3-S2;
* from 23.2 before 23.2R2;
* from 23.4 before 23.4R2.
Junos OS Evolved:
* all versions before 21.2R3-S8-EVO;
* from 21.4 before 21.4R3-S7-EVO;
* all versions of 22.1-EVO,
* from 22.2 before 22.2R3-S4-EVO;
* from 22.3 before 22.3R3-S3-EVO;
* all versions of 22.4-EVO,
* from 23.2 before 23.2R2-EVO;
* from 23.4 before 23.4R2-EVO. |
| Horde Virtual File System (VFS) API before 3.0.1 contains an OS command injection vulnerability in the Horde_Vfs_Smb driver where the _escapeShellCommand() method fails to sanitize command substitution sequences, allowing authenticated attackers to inject arbitrary shell commands through user-controlled filenames. Attackers can supply malicious filenames containing unescaped command substitution payloads through operations such as file upload, folder creation, rename, or deletion, which are interpolated into a double-quoted shell context and executed via proc_open() through /bin/sh -c before smbclient runs, resulting in arbitrary command execution on the underlying system. |
| @cyclonedx/cyclonedx-npm creates CycloneDX Software Bill of Materials from npm projects. From 2.1.0 before 5.0.0, the CLI passes user-supplied --workspace values to a subshell without proper sanitization when npm_execpath is unset or empty, allowing arbitrary OS command execution with the privileges of the invoking user. This issue is fixed in version 5.0.0. |
| Vinchin Backup & Recovery through 9.0.0.86562 contains a heap buffer overflow vulnerability that allows unauthenticated remote attackers to cause process crash or memory corruption by sending a malformed TCP packet with an unchecked body_len field to the agentlink_server service. Attackers can craft a malicious packet that passes an attacker-controlled length directly to recv(), triggering a heap overflow of up to approximately 4 GiB and resulting in process crash or potential memory corruption. |
| Ruflo is an agent meta-harness for Claude Code and Codex. Prior to 3.16.3, ruflo's default docker-compose deployment exposed the MCP bridge POST /mcp and POST /mcp/:group endpoints without authentication, allowing an unauthenticated network attacker to invoke tools/call to terminal_execute, obtain a shell in the bridge container, read provider API keys, and poison AgentDB learning-store patterns. This issue is fixed in version 3.16.3. |
| The application opened a PDF file containing an abnormal Unity 3D object. During parsing, the application incorrectly resolved a portion of the abnormal object as a pointer and used it as a valid address, ultimately causing the application to crash. |
| A heap bufferflow in pcfReadFont() due to missing glyph bounds checking in libXfont2 before 2.0.8 allows attackers authenticated as X client to execute code within the X server. |
| Composer is a dependency Manager for the PHP language. Prior to 2.2.29 and 2.10.2, a maliciously crafted package from an untrusted repository other than Packagist.org or Private Packagist can cause Composer to write attacker-controlled files outside the vendor directory and outside the project during install or update by using an invalid package name that is not correctly validated before dependency-resolution results are written or installed. This issue is fixed in versions 2.2.29 and 2.10.2. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.14.0, an attacker can craft a PDF with declared image size values that are much too large compared to the actual data, causing large memory usage in pypdf image parsing. This issue is fixed in version 6.14.0. |
| Memory Corruption when handling flash commands due to outdated LED count values being used after userspace modification. |
| A command injection vulnerability in the management plane of Palo Alto Networks PAN-OS® software enables an authenticated administrator to execute arbitrary OS commands as root.
The security risk posed by this issue is significantly minimized when CLI access is restricted to a limited group of administrators.
This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series).
Cloud NGFW and Prisma Access® are not impacted by this vulnerability. |
| Hoppscotch is an open source API development ecosystem. Prior to 2026.6.0, the updateInfraConfigs GraphQL mutation in admin/infra.resolver.ts accepts an attacker-controlled MAILER_SMTP_URL value, and validateSMTPUrl in utils.ts permits path, query, or fragment content that nodemailer parses into sendmail transport options, allowing an admin to execute arbitrary commands as root in the backend container after restart and mail sending. This issue is fixed in version 2026.6.0. |
| Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.469, Coolify's app/Jobs/ApplicationDeploymentJob.php generate_healthcheck_commands() function directly interpolated the health_check_host, health_check_method, and health_check_path parameters into shell commands without proper sanitization, allowing authenticated users to execute arbitrary commands inside deployment containers. This issue is fixed in version 4.0.0-beta.469. |
| Multiple buffer overflow vulnerabilities in the User-ID Terminal Server Agent (TSA) component of Palo Alto Networks PAN-OS software allow an unauthenticated attacker with network access to cause a denial of service (DoS) condition or potentially execute arbitrary code by sending specially crafted network traffic.
The security risk posed by this issue is minimized when the User-ID Terminal Server Agent connectivity is restricted to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://docs.paloaltonetworks.com/ngfw/help/10-2/user-identification/device-user-identification-terminal-services-agents#:~:text=To%20minimize%20security%20risk%2C%20restrict%20TS%20Agent%20connectivity%20to%20trusted%20internal%20IP%20addresses%20only. .
Panorama is not impacted by this vulnerability. |
| A vulnerability was determined in AidanPark openclaw-android up to 0.4.0. The affected element is an unknown function of the file android/app/src/main/java/com/openclaw/android/JsBridge.kt of the component Android WebView Bridge. This manipulation causes os command injection. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. The pull request to fix this issue awaits acceptance. |
| Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to 4.0.0-beta.471, pre-deployment and post-deployment commands are single-quote escaped but then sent through SSH heredoc transport that preserves newlines, allowing an authenticated user to inject additional shell statements that execute on the remote server during deployment. This issue is fixed in version 4.0.0-beta.471. |
| Imager versions before 1.033 for Perl treat unsigned EXIF IFD entry counts as signed.
Imager mishandled large EXIF IFD entry count values, treating them as negative numbers. This could lead to an attempt to allocate a block nearly the size of the address space, which fails and kills the process.
An attacker could craft an image with EXIF data that terminates a worker process. |
| An out-of-bounds heap write exists in the RAR5 recovery-volume (.rev) parser in WinRAR and UnRAR (RecVolumes5::ReadHeader in recvol5.cpp). The RecItems vector is sized only when the first .rev file in a set is processed; subsequent .rev files supply an independent RecNum value that is validated against that file's own TotalCount field but never against the actual size of RecItems. A crafted set of two or more .rev files can therefore write an attacker-controlled 32-bit value (the header's RevCRC field) to RecItems[RecNum] at an attacker-controlled offset up to 65534 * sizeof(RecVolItem) bytes past the allocation, corrupting adjacent heap objects. Triggering requires the victim to run a recovery/test operation on an attacker-supplied .rev set (for example 'unrar t x.part1.rev', WinRAR 'Repair archive', or auto-recovery when extracting a volume set with a missing .rar part). This is the RAR5-path sibling of CVE-2023-40477 (which was fixed in the RAR3 path only in WinRAR 6.23). Fixed in WinRAR / RAR 7.23. |
