| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. In 25.5.0 and earlier, wildcardToRegexp() in twisted/mail/imap4.py translates the IMAP asterisk and percent wildcards but passes all other characters from an authenticated client's LIST or LSUB pattern directly to re.compile(), allowing nested or otherwise expensive regular expression constructs to cause catastrophic backtracking when matched against mailbox names. Because Twisted uses a cooperative single-threaded reactor, the blocking match suspends all server input and output for the duration of the match. No fixed release is available as of this review. |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.2, LZ4DecompressorWithLength uses getDecompressedLength to trust the four-byte decompressed-length header before validating the compressed input, allowing a five-byte attacker-supplied input whose header declares a large output size to request up to approximately 2 GiB and exhaust the JVM heap. Convenience overloads backed by LZ4FastDecompressor or LZ4SafeDecompressor allocate the untrusted size, while overloads that write to a caller-provided destination buffer are not affected because the caller controls the destination size. This issue is fixed in version 1.11.2. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ Management rendered an AMQP authorization-error reason containing an attacker-controlled queue name as HTML when the OAuth management UI was enabled. Exploitation requires an attacker with queue configure permission, a management administrator who can see but cannot read that queue, and the administrator clicking Get Message(s). A queue name containing a base element can then retarget the automatic relative refresh because the Content Security Policy omits base-uri and connect-src, and an attacker endpoint that permits the management origin through CORS can receive the victim's Authorization header. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.2, net.jpountz.lz4.LZ4BlockInputStream refill() validates that the compressedLen field in a legacy LZ4Block header is nonnegative but allocates a compressed-input buffer of that attacker-controlled size before reading payload data, allowing a header-only stream to request a near-2 GiB allocation and exhaust the JVM heap. Canonical writers emit raw blocks when compression is not smaller than the original block, but vulnerable readers accept non-canonical oversized compressed blocks. This issue is fixed in version 1.11.2. |
| Improper Encoding or Escaping of Output vulnerability in the RemoteSyslogAppender of Apache log4net.
Every character outside visible ASCII and space was removed from the record instead of being escaped, so non-ASCII text and control characters such as tabs disappeared without notice. A party whose data reaches a log message could make a distinct value look identical in the record, for example a user name holding a zero-width space logged as admin. Only applications that use RemoteSyslogAppender are affected.
This issue affects Apache log4net: from 1.2.12 before 3.5.0.
Users are recommended to upgrade to version 3.5.0, which fixes the issue. |
| Insufficient Logging vulnerability in the EventLogAppender of Apache log4net.
Long messages were truncated to a fixed size that exceeds what the Windows Event Log accepts once the log and source names are counted, and the event log then stored nothing and reported nothing. A party whose data reaches a log message could suppress the whole record by making it long enough. Only applications on Windows that use EventLogAppender are affected.
This issue affects Apache log4net: from 1.2.9 before 3.5.0.
Users are recommended to upgrade to version 3.5.0, which fixes the issue. |
| yawkat LZ4 Java provides LZ4 compression for Java. From 1.7.0 until 1.11.4, net.jpountz.util.Native.load() uses File.createTempFile to create an exclusive temporary .lck file but derives the native-library path by removing the suffix, then FileOutputStream opens that predictable path without exclusive creation, allowing another local user with access to the same shared temporary directory to create or replace the library file before System.load() uses it. Successful exploitation depends on shared-directory permissions, host protections, and winning the race, and can execute native code as the victim; hardened systems may instead cause library loading to fail and fall back to Java implementations. Configurations using a system library, a private java.io.tmpdir, or Java-only implementations are not affected. This issue is fixed in version 1.11.4. |
| Improper Handling of Exceptional Conditions vulnerability in the aspnet-request pattern converter of Apache log4net.
Reading request parameters triggers ASP.NET request validation, so a request carrying content such as markup made the layout throw and the appender discarded the whole event. A sender could suppress the log record of their own request. Only applications on ASP.NET for .NET Framework whose layout uses %aspnet-request are affected.
This issue affects Apache log4net: from 1.2.11 before 3.5.0.
Users are recommended to upgrade to version 3.5.0, which fixes the issue. |
| Improper Handling of Unicode Encoding vulnerability in the SmtpPickupDirAppender of Apache log4net.
Content that the mail file writer cannot encode, such as an unpaired UTF-16 surrogate, made the write throw. Every buffered event in the batch was discarded, not only the one carrying the content, and a truncated mail could be left in the pickup directory. A party whose data reaches a log message could suppress the records of other events. Only applications that use SmtpPickupDirAppender are affected.
This issue affects Apache log4net: from 1.2.9 before 3.5.0.
Users are recommended to upgrade to version 3.5.0, which fixes the issue. |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.4, net.jpountz.lz4.LZ4FrameInputStream readHeader() allocates two new 4 MiB block buffers whenever a maximum-block-size frame header is read, and the default concatenated-frame mode allows attacker-controlled streams containing many minimal empty frames to trigger roughly 8 MiB of allocation for every 11 input bytes. The stream produces no decompressed output while consuming CPU and garbage-collection time, so decompressed-size limits do not mitigate the issue; readSingleFrame mode is not affected. This issue is fixed in version 1.11.4. |
| Improper Neutralization of Null Byte or NUL Character vulnerability in the OutputDebugStringAppender of Apache log4net.
A NUL character in logged content ended the debug output record at that point, so everything the layout rendered after it, including exception text and trailing fields, was silently lost. A party whose data reaches a log message could hide the rest of that record. Only applications on Windows that use OutputDebugStringAppender are affected.
This issue affects Apache log4net: from 1.2.9 before 3.5.0.
Users are recommended to upgrade to version 3.5.0, which fixes the issue. |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.4, net.jpountz.lz4.LZ4BlockInputStream configured with stopOnEmptyBlock set to false handles each well-formed empty LZ4Block by recursively calling refill(), allowing a long sequence of empty blocks in an attacker-controlled compressed stream to exhaust the decoding thread's stack and throw StackOverflowError. The default stopOnEmptyBlock setting is true and is not affected, and the issue does not cause memory corruption. This issue is fixed in version 1.11.4. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: Fix v9fs_issue_write() to update i_size and remote_i_size
Fix v9fs_issue_write() to update i_size and remote_i_size to the new size
of the server file if we made it larger, using the start fpos and the count
returned by p9_client_write() to calculate the new minimum file size.
This assumes that if the 9P server makes a short write (say it hits
ENOSPC), a reduced count is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check ras and obj before dereference
nbio_v7_9_handle_ras_controller_intr_no_bifring() dereferences ras and obj
without checking either for NULL. Both amdgpu_ras_get_context() and
amdgpu_ras_find_obj() can return NULL, e.g. during the window between
adev->nbio.ras being set (early in amdgpu_ras_init(), by design, to
enable the fatal-error interrupt as soon as possible) and the PCIE_BIF
ras object actually being created in RAS late_init. Any interrupt in that
window crashes in hard-IRQ context.
This is analogous to commit d190b459b2a4 ("drm/amdgpu: the warning
dereferencing obj for nbio_v7_4"), which fixed the same issue in the
nbio_v7_4 handler.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
(cherry picked from commit c7071767a50a32ed727cf800ac84372429e3b4b3) |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: do not leave stale header offsets after pskb_carve()
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() remove
the first bytes of a packet and reallocate skb->head.
All the headers that were present before the operation are gone,
but both functions call skb_headers_offset_update(skb, 0), which
is a no-op : skb->mac_header, skb->network_header,
skb->transport_header and skb->csum_start keep their old values and
now describe bytes which are no longer there.
Both helpers size the new head from the old skb_end_offset(), so the
stale offsets still land inside the new allocation. They point past
skb_tail_pointer() though, to bytes that were never initialized.
pskb_carve_inside_nonlinear() is the worst case, because it leaves a
zombie skb with an empty linear part (skb->data ==
skb_tail_pointer(skb), skb_headlen(skb) == 0), while
skb_mac_header_was_set() is still true and skb->mac_header is way
ahead of skb->data.
The only user of pskb_extract() is rds_tcp_data_recv(), and the
carved skb is queued on tinc->ti_skb_list. When the RDS incoming
message is released, rds_tcp_inc_free() calls skb_queue_purge(),
which frees the skbs with SKB_DROP_REASON_QUEUE_PURGE. This is
visible from drop_monitor, which then tries to pull back to the
(bogus) mac header :
skbuff: __skb_pull(len=234)
skb len=6968 data_len=6968 headroom=0 headlen=0 tailroom=0
end-tail=384 mac=(234,14) mac_len=14 net=(248,40) trans=288
shinfo(txflags=0 nr_frags=1 gso(size=1428 type=16 segs=5))
csum(0x100120 start=288 offset=16 ip_summed=3 complete_sw=0 valid=1 level=0)
hash(0x7b446c6c sw=0 l4=1) proto=0x86dd pkttype=0 iif=60
kernel BUG at ./include/linux/skbuff.h:2847!
Add skb_carve_reset_headers() to mark the mac and transport headers
as not set, reset the network header, clear skb->mac_len, and drop
a now meaningless CHECKSUM_PARTIAL (csum_start no longer describes
anything).
Invalidate the inner offsets as well. Unlike mac_header and
transport_header they have no "unset" sentinel, so a leftover
non-zero value still looks like a real header. Zero
skb->inner_mac_header, skb->inner_network_header,
skb->inner_transport_header, skb->inner_protocol and
skb->encapsulation, so that all the header state is invalidated in
one place.
v2: fixed an inaccurate changelog. The stale offsets stay inside the
new skb->head, which is never smaller than the old one, they
simply point past skb_tail_pointer() to bytes that are gone.
Thanks to Xuanqiang Luo for insisting on this.
Also invalidate the inner header state, as suggested by the
netdev AI review :
https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260911114922.621937-1-edumazet%40google.com |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: prevent buffer overflow in page_pool allocation
The per‑processor buffering scheme is supported only if the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8).
This is already checked in mvpp2_probe() during the initial
activation of percpu_pools.
However, mvpp2_change_mtu() may later call
mvpp2_bm_switch_buffers(priv, true) without this check, which can
lead to an out-of-bounds access in the priv->page_pool array in
mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ
entries, and mvpp2_get_nrxqs() may return exactly that value. The
per-CPU scheme then doubles it to nrxqs * 2, exceeding the array
bounds.
Check that the hardware version is MVPP22 or newer and that the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS
before switching to per-CPU mode.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| Dell System Update, versions prior to 2.3.0.0, contains an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Remote execution. |
| Authentication bypass in the Azure AD external login flow in Devolutions Server 2026.3.7.0 and earlier allows a remote attacker to take over a user's account via replay of a captured login-session token exposed in a redirect URL. |
| Dell System Update, versions prior to 2.3.0.0, contains an Improper Certificate Validation vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote execution. |
| Missing authorization in the global vault in Devolutions Server 2026.3.7.0 and earlier allows an authenticated user with only the global vault view permission to modify and delete global contact and folder entries. |
