| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow an authenticated attacker to obtain sensitive information in PASE. An attacker could exploit this vulnerability to access information about process they shouldn't be permitted to access. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to corrupt memory due to an integer underflow. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local authenticated attacker to inject parameters into a CL command due to improper neutralization of special elements. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: huawei: fix missing hid_is_usb() check
to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.
I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Fix race on the initial mm->futex.phash.ref allocation
futex_hash_allocate() allocates mm->futex.phash.ref without any locking.
Commit d9b05321e21e ("futex: Move futex_hash_free() back to __mmput()")
moved the allocation here and assumed that the process has just a single
thread at this point.
Commit ee9dce44362b ("futex: Drop CLONE_THREAD requirement for private
default hash alloc") widened need_futex_hash_allocate_default() to cover
any CLONE_VM clone, but left out vfork because the parent is suspended and
cannot race.
That no longer holds once vfork is nested. If a vfork child calls vfork
again and is then killed with SIGKILL, the parent is released from its
vfork wait and runs concurrently with the grandchild in the same mm.
Neither of them went through futex_hash_allocate_default().
When both call prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS) at the same
time, each one sees mm->futex.phash.ref as NULL and stores its own percpu
counter. Only the last store survives. The counter stored first is no
longer reachable from the mm, so the references on it are not seen by
__futex_ref_atomic_end(). A private hash that still has references is then
considered dead and freed, and a task that still holds one of its buckets
writes into freed memory in futex_q_lock().
Store the counter once with cmpxchg() and let the loser free_percpu() its
own. The initial reference has to be taken before the store, otherwise
another task can install a private hash while the counter is still 0. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Fix race in futex_pivot_pending() during private hash resize
A task performing a custom private hash resize can remain blocked in
uninterruptible sleep indefinitely. The hung-task detector reports:
INFO: task futex-resizer:314 blocked for more than 10 seconds.
task:futex-resizer state:D stack:14824 pid:314 tgid:312 ppid:311
Call Trace:
__schedule+0x521/0xf30
schedule+0x22/0xa0
futex_hash_allocate+0x3db/0x490
__do_sys_prctl+0x6f5/0xbd0
do_syscall_64+0xf9/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: hung_task: blocked tasks
futex_pivot_pending() allows the resize request to continue when
either no replacement hash is pending (hash_new == NULL) or the current
hash reference count has reached zero.
After the final-reference wake, another futex task can complete the
pivot between the two observations:
T1 T2
futex_hash_allocate()
wait_var_event(mm, ...)
futex_pivot_pending(mm)
hash_new != NULL
futex_hash()
futex_ref_get(old) -> false
futex_pivot_hash(mm)
hash_new = NULL
__futex_pivot_hash(mm, new)
rcu_assign_pointer(hash, new)
fph = rcu_dereference(hash) /* new */
futex_ref_is_dead(fph) -> false
schedule()
The pivot changes the state from hash_new != NULL with a dead current
hash to hash_new == NULL with a live current hash. Because
futex_pivot_pending() reads hash_new and hash without serialization,
the resize task can observe hash_new in the pre-pivot state and hash in
the post-pivot state, causing futex_pivot_pending() to return false even
though the pivot has completed. The task then goes to sleep after the
wakeup has already been consumed.
Serialize state reads in futex_pivot_pending() using futex_mm_phash::lock.
This guarantees that futex_pivot_pending() observes hash_new and hash
atomically, eliminating the race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
futex/pi: Plug private futex exec() race
The check for private futexes whether the waiter's mm, which is stored in
the futex_key and copied into the pi_state, is the same as the owner's mm
is not sufficient for exec(). exec() has a gap where the mm check fails to
give the correct answer:
exec()
...
exec_release_mm()
futex_exec_release()
tsk::futex::exit_state = EXITING;
cleanup_robust_list();
1) tsk::futex::exit_state = OK;
...
old_mm = tsk::mm;
2) tsk::mm = ->mm;
Between #1 and #2 the check for the mm is wrong as that mm is about to be
swapped out and eventually freed.
Plug this gap by:
1) Setting tsk::futex::exit_state to FUTEX_STATE_DEAD in
futex_exec_release()
2) Setting tsk::futex::exit_state to FUTEX_STATE_OK after
the mm has been switched.
From a futex point of view the task is dead after it finished the robust
list cleanup up to the point where it sets the state to OK again. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ionic: avoid OOB TX partner lookup for hwstamp RXQ
The dedicated hardware timestamp RX queue is allocated with q->index
equal to lif->ionic->nrxqs_per_lif. The normal txqcqs array only
contains the regular queue pairs, so using that index to set rxq->partner
can read one entry past txqcqs[] and then write through the derived
pointer.
Only link RX/TX partners for normal queue-pair indexes. Leave the hwstamp
RX queue unpaired, and make the XDP_TX path abort cleanly if an RX queue
has no TX partner. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: pidff: fix OOB write when hid->inputs is empty
hid_pidff_init_with_quirks() derives its input_dev from
list_entry(hid->inputs.next, struct hid_input, list)
without first checking that hid->inputs is non-empty. The list member
of struct hid_input is at offset 0, so on an empty list list_entry()
yields &hid->inputs itself and the following hidinput->input load reads
an unrelated member of struct hid_device. dev is then a type-confused
pointer, and force-feedback init writes through it: each
set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of
the object dev actually aliases, and input_ff_create() adds further
writes of a heap pointer and two function pointers.
Until hid-universal-pidff the only caller was hid_pidff_init() from
usbhid, which runs under HID_CLAIMED_INPUT and therefore always has at
least one hid_input. universal_pidff_probe() starts the device with
HID_CONNECT_DEFAULT & ~HID_CONNECT_FF and then calls
hid_pidff_init_with_quirks() directly whenever the descriptor carries a
PID usage page, bypassing that gate. A report descriptor whose only
application collection is on HID_UP_PID leaves hid->inputs empty while
hid_connect() still succeeds through the hidraw claim, so probe reaches
the unguarded list_entry().
The write happens in the USB probe path, on the hotplug workqueue, so
plugging in a malicious device is enough to trigger it; no attacker
software and no logged-in user are required. KASAN reports an 8-byte
out-of-bounds write in hid_pidff_init_with_quirks() reached from
universal_pidff_probe().
Check for an empty list before deriving dev and return -ENODEV, as the
other HID force-feedback drivers already do. universal_pidff_probe()
propagates the error and unwinds.
Discovered by XBOW, triaged by Baul Lee <[email protected]> |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: fix OOB read of field->usage in hid_set_field()
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
kvzalloc()ed allocation and into a neighbouring object. Had the guard
run first, offset < report_count <= maxusage would already have confined
the pointer to the array.
A caller supplies such an offset today. picolcd_fb_send_tile()
validates only report->maxfield before issuing
hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its
offsets are fixed at 11..42 and are never checked against the bound
field. When the device registers that field with fewer usages, the
framebuffer deferred-io work drives the read on every tile. KASAN
reports a 4-byte slab-out-of-bounds read in hid_dump_input() below
hid_set_field(), and the same boot logs "offset (1) exceeds
report_count (1)" from the guard that runs only afterwards.
Move the hid_dump_input() call below the guard. Because
field->maxusage >= field->report_count, the guard then establishes that
field->usage + offset lies inside the array before it is dereferenced,
for every caller and without changing behaviour on the valid path.
Discovered by XBOW, triaged by Baul Lee <[email protected]> |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: serialize mode sysfs access with lock_fb_info()
show_mode(), show_modes(), and store_mode() access fb_info->modelist
and fb_info->mode without holding lock_fb_info(). store_modes() takes
lock_fb_info() while replacing the modelist and freeing the old one.
A concurrent reader or writer can load a pointer to an old modelist
entry before store_modes() frees it, then dereference freed memory or
store a stale freed pointer in fb_info->mode.
Take lock_fb_info() in show_mode(), show_modes(), and store_mode() to
serialize with store_modes(). In show_mode(), copy the mode to the
stack and format after dropping the lock. In store_mode(), split
activate() into a _locked variant to avoid double-locking, and hold
the locks for the modelist walk, mode conversion, activation, and
fb_info->mode assignment together. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: Wrap user-invoked calls to fb_set_var() in helper
Handle fbcon during display updates in fb_set_var_from_user(). Check
with fbcon if the mode change is possible, update hardware state and
finally update fbcon. Update all callers.
Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other
mode-changes callers in sysfs and driver code are missing fbcon-related
steps.
With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain
fbcon state themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations
When fuzzing the nvme target code, I tripped a kernel warning in
nvmet_tcp_map_data() because the length passed into the allocator is
controlled by the remote initiator.
A remote initiator that sends a command with an SGL claiming a huge
number, can create a scatterlist and iovec allocation of over 1 million
entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER
and then the page allocator will trip on a WARN_ON_ONCE_GFP() message:
WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof
Workqueue: nvmet_tcp_wq nvmet_tcp_io_work
...
sgl_alloc_order
nvmet_tcp_map_data
nvmet_tcp_try_recv_pdu
As it's never good to trip a kernel warning remotely due to many systems
having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to
the allocation flags. |
| In Trimble TM4WEB 21.4.0.4 due to security misconfiguration with session identifiers, it is possible to recover valid session cookies via reflected cross-site scripting affecting the external document viewer endpoint. |
| In Trimble TM4WEB 21.4.0.4, the external bill viewer endpoint is vulnerable to reflected cross-site scripting via injection in a arbitrary parameter appended to the URL. |
| PowerJob versions 4.x through 5.1.2 contain an unauthenticated remote code execution vulnerability in the /friend/process endpoint of the Server-Worker transport layer |
| PJSIP is a free and open source multimedia communication library written in C. Prior to commit 628b716, a stack buffer overflow exists in the PJLIB-UTIL telnet CLI front-end when redrawing the command line during history recall (handle_up_down() in cli_telnet.c). This affects only applications that enable the telnet CLI front-end (same gating as the related CLI issue). The line-redraw sequence for a recalled history entry can accumulate more data than a fixed-size stack buffer holds, which may lead to application termination. Exploitation requires access to the unauthenticated telnet CLI, which already permits arbitrary CLI commands, so the additional impact is limited. Applications that do not enable the telnet CLI front-end are not affected. This issue has been patched via commit 628b716. |
| Wss4jSecurityInterceptor initialized its BSP (WS-I Basic Security Profile) compliance flag so that inbound validation disabled WSS4J BSP enforcement on RequestData. Services that validate WS-Security on the network could therefore accept messages that violate BSP rules, weakening protocol-level checks.
Affected versions:
Spring Web Services 5.0.0 through 5.0.1; 4.1.0 through 4.1.3; 4.0.0 through 4.0.18; 3.1.0 through 3.1.8. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: sun6i-dma: Fix reclaim descriptors while terminating DMA
When terminating DMA transfers, active descriptors are not properly
reclaimed. Only cyclic descriptors were handled, leaving non-cyclic
descriptors and their LLI chains to be permanently leaked.
Fix by using vchan_terminate_vdesc() which handles both cyclic and
non-cyclic descriptors by adding them to desc_terminated queue for
proper cleanup.
Add pchan->desc != pchan->done check to prevent double-adding completed
descriptors, which would corrupt the list. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: reject stale cookies with mismatched verification tags
sctp_unpack_cookie() skips cookie expiration checks whenever an
association already exists. This is broader than the exception in
RFC 9260 Section 5.2.4.
For an existing association, Section 5.2.4 permits an expired State
Cookie only when both Verification Tags in the cookie match the current
association. Otherwise, the packet SHOULD be discarded and a Stale
Cookie ERROR MUST be sent.
The broad check lets an expired Action A restart cookie reach
sctp_sf_do_dupcook_a(). In a runtime test with the default 60 second
cookie lifetime, replaying such a cookie after 65 seconds returned a
COOKIE-ACK and restarted the association.
Check cookie expiration unless both Verification Tags match. This
preserves the Action D exception for a lost COOKIE ACK while rejecting
expired cookies in all other cases. |
