| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use of Weak Credentials vulnerability in B&R Industrial Automation GmbH mapp Audit used in mapp Services.
This issue affects mapp Audit used in mapp Services: before 6.8.0. |
| Integer overflow or wraparound in .NET allows an unauthorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix out-of-bounds read in broadcast Gap ACK blocks
A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its
data area. tipc_get_gap_ack_blks() only verifies that the record's len
field is self-consistent with its ugack_cnt/bgack_cnt counts
(sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check
that the record actually fits in the message data area, msg_data_sz().
The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen)
break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the
returned size, so tipc_link_advance_transmq() copies the record off the
receive skb with an attacker-controlled count:
this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt),
GFP_ATOMIC);
A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one
ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its
data area is short, carrying a Gap ACK record with len = 0x400,
bgack_cnt = 0xff and ugack_cnt = 0. len then equals
struct_size(p, gacks, 255), so the consistency check passes and ga is
non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out
of the much smaller skb:
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60
Read of size 1024 at addr ffff0000c7030d38 by task poc864/69
Call trace:
kmemdup_noprof+0x48/0x60
tipc_link_advance_transmq+0x86c/0xb80
tipc_link_bc_ack_rcv+0x19c/0x1e0
tipc_bcast_sync_rcv+0x1c4/0x2c4
tipc_rcv+0x85c/0x1340
tipc_l2_rcv_msg+0xac/0x104
The buggy address belongs to the object at ffff0000c7030d00
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 56 bytes inside of
allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0)
The copied-out bytes are subsequently consumed as gap/ack values, but
the read is already out of bounds at the kmemdup() regardless of how
they are used.
The unicast STATE path drops such a message: "if (glen > dlen) break;"
skips the rest of STATE_MSG handling and the skb is freed. Make the
broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record
against msg_data_sz() and, when it does not fit, reports it back through
tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than
processed. ga is not cleared on this path: ga == NULL already means
"legacy peer without Selective ACK", a distinct legitimate state. |
| A vulnerability in the Silicon One integration for Cisco Nexus 9000 Series Switches could allow an unauthenticated, remote attacker to execute code with root privileges.
This vulnerability exists because TCP ports 43210 and 43211 are accessible in the default Layer 3 (L3) virtual routing and forwarding (VRF). A successful exploit could allow the attacker to connect to an affected device and send crafted input that could be executed as code with root privileges. The exploitation of this vulnerability could also cause the S1HAL process to crash, which could cause the device to reload. |
| A vulnerability was identified in Tenda HG10 300001138. Impacted is the function formWlanSetup of the file /boaform/formWlanSetup of the component Boa Web Server. The manipulation of the argument ssid leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. |
| Taipy configures its socket.io server with wildcard CORS origin and credential flag enabled, allowing any web page to establish credentialed WebSocket connections to victim applications. Attackers can open socket.io sessions from arbitrary domains and invoke state variable modifications and action callbacks without CSRF protection. |
| A vulnerability was determined in Tenda HG10 300001138. This issue affects the function formLogin of the file /boaform/formLogin of the component Boa Web Server. Executing a manipulation of the argument Username can lead to buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. |
| There is a memory corruption vulnerability recently
discovered in NI LabVIEW that may result in information disclosure or arbitrary
code execution. Successful exploitation requires an attacker to get a
user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2026 Q3 (26.3.0)
and prior versions. |
| There is a memory corruption vulnerability recently
discovered in NI LabVIEW that may result in information disclosure or arbitrary
code execution. Successful exploitation requires an attacker to get a
user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2026 Q3 (26.3.0)
and prior versions. |
| There is a memory corruption vulnerability recently
discovered in NI LabVIEW that may result in information disclosure or arbitrary
code execution. Successful exploitation requires an attacker to get a
user to open a specially crafted VI. This vulnerability affects NI
LabVIEW 2026 Q3 (26.3.0) and prior versions. |
| A single crafted SSH message gives an unauthenticated network attacker an out-of-bounds stack write of attacker-controlled length and content against any application built on swift-nio-ssh. This vulnerability is addressed in swift-nio-ssh version 0.14.1. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: reject a class permission count below its inherited common
security_get_permissions() maps an inherited common's permissions into
an array sized by the class's own permissions.nprim, but class_read()
takes that nprim verbatim from the policy image and never checks that it
covers the common. A class that inherits a common of N permissions while
declaring a smaller nprim is accepted, and on load the common's
permissions are written past the class-sized array -- an out-of-bounds
heap write.
Reject a class whose permission count is below its inherited common's.
Well-formed policies, where the class count already includes the
inherited permissions, are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Validate framework notification message layout
Framework notifications carry an indirect message in the shared RX
buffer. Validate the reported offset and size before using them, reject
zero-length payloads, and ensure that any non-header payload starts at
the UUID field rather than in the middle of the message header.
Use the validated offset and size values for both kmemdup() and the UUID
parsing path so malformed firmware data cannot drive an out-of-bounds
read or an oversized allocation. |
| DBI versions before 1.648 for Perl saved errors in a limited-sized buffer.
Error messages that were returned when RaiseError, PrintError or HandleError were set were written to a 200-byte buffer without a length limit.
Attackers that can influence the error text in an application can trigger a buffer overflow. |
| A vulnerability was found in TOTOLINK CP450 4.1.0. The impacted element is an unknown function of the file /cgi-bin/cstecgi.cgi. Performing a manipulation of the argument topicurl results in buffer overflow. Remote exploitation of the attack is possible. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: reject a permission value exceeding the class permission count
perm_read() bounds a permission value by SEL_VEC_MAX but never by the
nprim of the owning class or common, which is taken verbatim from the
policy image. security_get_permissions() then writes perms[value - 1]
into an nprim-sized kcalloc() array, so a class declaring fewer
permissions than its largest permission value drives an out-of-bounds
heap write. The top-level symbol tables are validated this way; the
nested per-class permission table is not.
Reject a permission whose value exceeds nprim, which is already set when
perm_read() runs. Well-formed policies are unaffected.
[PM: tweak comment for line length] |
| Incorrect boundary conditions in the Layout: Grid component. This vulnerability was fixed in Firefox 155 and Thunderbird 155. |
| Internally found bugs present in Thunderbird 154, Thunderbird ESR 153.1 and Thunderbird ESR 140.14. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 155, Firefox ESR 115.40, Firefox ESR 140.15, Firefox ESR 153.2, Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) cap PDIO scan in get_multiple at ADM1266_PDIO_NR
adm1266_gpio_get_multiple() iterates the PDIO portion of the
caller-supplied mask using
for_each_set_bit_from(gpio_nr, mask,
ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) {
...
}
where ADM1266_PDIO_STATUS is the PMBus command code (0xE9, i.e. 233),
not the number of PDIO pins. The intended upper bound is
ADM1266_GPIO_NR + ADM1266_PDIO_NR = 25.
gpiolib hands in a mask sized for gc.ngpio (= 25 bits on this chip),
so the iteration walks find_next_bit() up to 242, reading up to 217
extra bits (a handful of unsigned-long words: four on 64-bit, seven
on 32-bit) of whatever lives past the end of the mask in the
caller's stack. Any incidental set bit in that range then drives a
set_bit(gpio_nr, bits) call that writes past the end of the
caller-supplied bits array too -- both out-of-bounds.
Substitute ADM1266_PDIO_NR for the constant so the scan stops at the
last real PDIO bit. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer
adm1266_pmbus_block_xfer() copies the device-supplied block payload
into the caller-provided buffer using the device-supplied length:
memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
The helper does not know how large data_r is and trusts the device to
return at most one record's worth of bytes. adm1266_nvmem_read_blackbox()
violates that contract: it advances read_buff inside data->dev_mem in
ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to
write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns
more than 64 bytes on the trailing record (read_buff offset 1984 in
the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes
before the post-call
if (ret != ADM1266_BLACKBOX_SIZE)
return -EIO;
can reject the response.
Contain the fix in the caller without changing the helper signature:
read each record into a 255-byte local bounce buffer that matches the
helper's maximum output, validate the returned length, and only then
copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot. |
