| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in D-Link DIR-816L 2_06_b09_beta. This issue affects the function soapcgi_main of the file /soap.cgi. This manipulation causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: backend: fix out-of-bound write
The buffer is set to 80 character. If a caller write more characters,
count is truncated to the max available space in "simple_write_to_buffer".
But afterwards a string terminator is written to the buffer at offset count
without boundary check. The zero termination is written OUT-OF-BOUND.
Add a check that the given buffer is smaller then the buffer to prevent. |
| SQL injection vulnerability in oa_system oasys v.1.1 allows a remote attacker to execute arbitrary code via the alph parameters in src/main/Java/cn/gson/oasys/controller/address/AddrController |
| In danny-avila/librechat version 0.7.9, there is an insecure API design issue in the 2-Factor Authentication (2FA) flow. The system allows users to disable 2FA without requiring a valid OTP or backup code, bypassing the intended verification process. This vulnerability occurs because the backend does not properly validate the OTP or backup code when the API endpoint '/api/auth/2fa/disable' is directly accessed. This flaw can be exploited by authenticated users to weaken the security of their own accounts, although it does not lead to full account compromise. |
| A vulnerability in the RADIUS setting Reject RADIUS requests from clients with repeated failures on Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause Cisco ISE to restart unexpectedly.
This vulnerability is due to a logic error when processing a RADIUS access request for a MAC address that is already a rejected endpoint. An attacker could exploit this vulnerability by sending a specific sequence of multiple crafted RADIUS access request messages to Cisco ISE. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when Cisco ISE restarts. |
| An authenticated command injection vulnerability exists in Pi-hole versions up to 3.3. When adding a domain to the allowlist via the web interface, the domain parameter is not properly sanitized, allowing an attacker to append OS commands to the domain string. These commands are executed on the underlying operating system with the privileges of the Pi-hole service user.
This behavior was present in the legacy AdminLTE interface and has since been patched in later versions. |
| In the Linux kernel, the following vulnerability has been resolved:
video: fbdev: arkfb: Check the size of screen before memset_io()
In the function arkfb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
[ 659.399066] BUG: unable to handle page fault for address: ffffc90003000000
[ 659.399077] #PF: supervisor write access in kernel mode
[ 659.399079] #PF: error_code(0x0002) - not-present page
[ 659.399094] RIP: 0010:memset_orig+0x33/0xb0
[ 659.399116] Call Trace:
[ 659.399122] arkfb_set_par+0x143f/0x24c0
[ 659.399130] fb_set_var+0x604/0xeb0
[ 659.399161] do_fb_ioctl+0x234/0x670
[ 659.399189] fb_ioctl+0xdd/0x130
Fix the this by checking the value of 'screen_size' before memset_io(). |
| In the Linux kernel, the following vulnerability has been resolved:
video: fbdev: vt8623fb: Check the size of screen before memset_io()
In the function vt8623fb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
[ 583.339036] BUG: unable to handle page fault for address: ffffc90005000000
[ 583.339049] #PF: supervisor write access in kernel mode
[ 583.339052] #PF: error_code(0x0002) - not-present page
[ 583.339074] RIP: 0010:memset_orig+0x33/0xb0
[ 583.339110] Call Trace:
[ 583.339118] vt8623fb_set_par+0x11cd/0x21e0
[ 583.339146] fb_set_var+0x604/0xeb0
[ 583.339181] do_fb_ioctl+0x234/0x670
[ 583.339209] fb_ioctl+0xdd/0x130
Fix the this by checking the value of 'screen_size' before memset_io(). |
| In the Linux kernel, the following vulnerability has been resolved:
sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed
With cgroup v2, the cpuset's cpus_allowed mask can be empty indicating
that the cpuset will just use the effective CPUs of its parent. So
cpuset_can_attach() can call task_can_attach() with an empty mask.
This can lead to cpumask_any_and() returns nr_cpu_ids causing the call
to dl_bw_of() to crash due to percpu value access of an out of bound
CPU value. For example:
[80468.182258] BUG: unable to handle page fault for address: ffffffff8b6648b0
:
[80468.191019] RIP: 0010:dl_cpu_busy+0x30/0x2b0
:
[80468.207946] Call Trace:
[80468.208947] cpuset_can_attach+0xa0/0x140
[80468.209953] cgroup_migrate_execute+0x8c/0x490
[80468.210931] cgroup_update_dfl_csses+0x254/0x270
[80468.211898] cgroup_subtree_control_write+0x322/0x400
[80468.212854] kernfs_fop_write_iter+0x11c/0x1b0
[80468.213777] new_sync_write+0x11f/0x1b0
[80468.214689] vfs_write+0x1eb/0x280
[80468.215592] ksys_write+0x5f/0xe0
[80468.216463] do_syscall_64+0x5c/0x80
[80468.224287] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix that by using effective_cpus instead. For cgroup v1, effective_cpus
is the same as cpus_allowed. For v2, effective_cpus is the real cpumask
to be used by tasks within the cpuset anyway.
Also update task_can_attach()'s 2nd argument name to cs_effective_cpus to
reflect the change. In addition, a check is added to task_can_attach()
to guard against the possibility that cpumask_any_and() may return a
value >= nr_cpu_ids. |
| In the Linux kernel, the following vulnerability has been resolved:
intel_th: msu: Fix vmalloced buffers
After commit f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP") there's
a chance of DMA buffer getting allocated via vmalloc(), which messes up
the mmapping code:
> RIP: msc_mmap_fault [intel_th_msu]
> Call Trace:
> <TASK>
> __do_fault
> do_fault
...
Fix this by accounting for vmalloc possibility. |
| A vulnerability was identified in code-projects Simple Cafe Ordering System 1.0. Affected by this issue is some unknown functionality of the file /login.php. Such manipulation of the argument Username leads to sql injection. The attack may be performed from remote. The exploit is publicly available and might be used. |
| A weakness has been identified in code-projects Simple Cafe Ordering System 1.0. This vulnerability affects unknown code of the file /addmem.php. Executing manipulation of the argument studentnum can lead to sql injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be exploited. |
| A vulnerability has been found in code-projects Student Information System 2.0. This issue affects some unknown processing of the file /register.php. The manipulation leads to sql injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. |
| A security vulnerability has been detected in itsourcecode Inventory Management System 1.0. The affected element is an unknown function of the file /admin/user/index.php?view=edit. The manipulation of the argument ID leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. |
| A flaw has been found in code-projects Nero Social Networking Site 1.0. This issue affects some unknown processing of the file /friendsphoto.php. This manipulation of the argument ID causes sql injection. The attack can be initiated remotely. The exploit has been published and may be used. |
| A vulnerability was identified in itsourcecode Online Voting System 1.0. The affected element is an unknown function of the file /login.php. Such manipulation of the argument Username leads to sql injection. The attack may be launched remotely. The exploit is publicly available and might be used. |
| A weakness has been identified in SourceCodester Train Station Ticketing System 1.0. Affected by this vulnerability is an unknown functionality of the file /ajax.php?action=login. This manipulation of the argument Username causes sql injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. |
| A security flaw has been discovered in code-projects Simple Pizza Ordering System 1.0. Affected is an unknown function of the file /listorder.php. Performing manipulation of the argument ID results in sql injection. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not allow CHAIN_ID to refer to another table
When doing lookups for chains on the same batch by using its ID, a chain
from a different table can be used. If a rule is added to a table but
refers to a chain in a different table, it will be linked to the chain in
table2, but would have expressions referring to objects in table1.
Then, when table1 is removed, the rule will not be removed as its linked to
a chain in table2. When expressions in the rule are processed or removed,
that will lead to a use-after-free.
When looking for chains by ID, use the table that was used for the lookup
by name, and only return chains belonging to that same table. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not allow SET_ID to refer to another table
When doing lookups for sets on the same batch by using its ID, a set from a
different table can be used.
Then, when the table is removed, a reference to the set may be kept after
the set is freed, leading to a potential use-after-free.
When looking for sets by ID, use the table that was used for the lookup by
name, and only return sets belonging to that same table.
This fixes CVE-2022-2586, also reported as ZDI-CAN-17470. |
