| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Information Exposure issue was discovered in Belden Hirschmann GECKO Lite Managed switch, Version 2.0.00 and prior versions. Non-sensitive information can be obtained anonymously. |
| An Insufficiently Protected Credentials issue was discovered in Sierra Wireless AirLink Raven XE, all versions prior to 4.0.14, and AirLink Raven XT, all versions prior to 4.0.11. Sensitive information is insufficiently protected during transmission and vulnerable to sniffing, which could lead to information disclosure. |
| CMS Made Simple version 1.x Form Builder before version 0.8.1.6 allows remote attackers to conduct information-disclosure attacks via exportxml. |
| FastStone MaxView 3.0 and 3.1 allows user-assisted attackers to cause a denial of service (application crash) via a malformed BMP image with a crafted biSize field in the BITMAPINFOHEADER section. |
| CPEs used by subscribers on the access network receive their individual configuration settings from a central GAPS instance. A CPE identifies itself by the MAC address of its WAN interface and a certain "chk" value (48bit) derived from the MAC. The algorithm used to compute the "chk" was disclosed by reverse engineering the CPE's firmware. As a result, it is possible to forge valid "chk" values for any given MAC address and therefore receive the configuration settings of other subscribers' CPEs. The configuration settings often contain sensitive values, for example credentials (username/password) for VoIP services. This issue affects Genexis B.V. GAPS up to 7.2. |
| In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and Websafe software version 13.0.0, 12.0.0 to 12.1.2, 11.6.0 to 11.6.1 and 11.5.0 - 11.5.4, an undisclosed sequence of packets sent to BIG-IP High Availability state mirror listeners (primary and/or secondary IP) may cause TMM to restart. |
| In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0, 12.1.0 - 12.1.2 and 11.5.1 - 11.6.1, an undisclosed sequence of packets, sourced from an adjacent network may cause TMM to crash. |
| In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0 and 12.0.0 - 12.1.2, undisclosed traffic patterns sent to BIG-IP virtual servers, with the TCP Fast Open and Tail Loss Probe options enabled in the associated TCP profile, may cause a disruption of service to the Traffic Management Microkernel (TMM). |
| In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0 and 12.1.0 - 12.1.2, malicious requests made to virtual servers with an HTTP profile can cause the TMM to restart. The issue is exposed with BIG-IP APM profiles, regardless of settings. The issue is also exposed with the non-default "normalize URI" configuration options used in iRules and/or BIG-IP LTM policies. |
| In F5 BIG-IP LTM, AAM, AFM, APM, ASM, Link Controller, PEM, and WebSafe 12.1.0 through 12.1.2, certain values in a TLS abbreviated handshake when using a client SSL profile with the Session Ticket option enabled may cause disruption of service to the Traffic Management Microkernel (TMM). The Session Ticket option is disabled by default. |
| A vulnerability in the web proxy functionality of the Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to forward traffic from the web proxy interface of an affected device to the administrative management interface of an affected device, aka an Access Control Bypass Vulnerability. Affected Products: virtual and hardware versions of Cisco Web Security Appliance (WSA). More Information: CSCvd88863. Known Affected Releases: 10.1.0-204 9.0.0-485. |
| A vulnerability in the CLI of Cisco ASR 5000 Series Aggregated Services Routers running the Cisco StarOS operating system could allow an authenticated, local attacker to bypass the CLI restrictions and execute commands on the underlying operating system. The vulnerability is due to insufficient input sanitization of user-supplied input at the CLI. An attacker could exploit this vulnerability by crafting a script on the device that will allow them to bypass built-in restrictions. An exploit could allow the unauthorized user to launch the CLI directly from a command shell. Cisco Bug IDs: CSCvd47722. Known Affected Releases: 21.0.v0.65839. |
| A vulnerability in the ConfD server of the Cisco Elastic Services Controller (ESC) could allow an authenticated, remote attacker to acquire sensitive system information. The vulnerability is due to insufficient protection of sensitive files on the system. An attacker could exploit this vulnerability by logging into the ConfD server and executing certain commands. An exploit could allow an unprivileged user to view configuration parameters that can be maliciously used. Cisco Bug IDs: CSCvd76409. Known Affected Releases: 2.3, 2.3(2). |
| A vulnerability in the Elastic Services Controller (ESC) web interface of the Cisco Ultra Services Platform could allow an authenticated, remote attacker to acquire sensitive information. The vulnerability is due to the transmission of sensitive information as part of a GET request. An attacker could exploit this vulnerability by sending a GET request to a vulnerable device. An exploit could allow the attacker to view information regarding the Ultra Services Platform deployment. Cisco Bug IDs: CSCvd76406. Known Affected Releases: 21.0.v0.65839. |
| A vulnerability in the web interface of the Cisco RV340, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to Cisco WebEx Meetings not sufficiently protecting sensitive data when responding to an HTTP request to the web interface. An attacker could exploit the vulnerability by attempting to use the HTTP protocol and looking at the data in the HTTP responses from the Cisco WebEx Meetings Server. An exploit could allow the attacker to find sensitive information about the application. Cisco Bug IDs: CSCve37988. Known Affected Releases: firmware 1.0.0.30, 1.0.0.33, 1.0.1.9, 1.0.1.16. |
| A vulnerability in Cisco Elastic Services Controller could allow an authenticated, local, unprivileged attacker to access sensitive information, including credentials for system accounts, on an affected system. The vulnerability is due to improper protection of sensitive log files. An attacker could exploit this vulnerability by logging in to an affected system and accessing unprotected log files. A successful exploit could allow the attacker to access sensitive log files, which may include system credentials, on the affected system. Cisco Bug IDs: CSCvc76616. Known Affected Releases: 2.2(9.76). |
| A vulnerability in the Inventory Management feature of Cisco Prime Collaboration Provisioning Tool could allow an authenticated, remote attacker to view sensitive information on the system. The vulnerability is due to insufficient protection of restricted information. An attacker could exploit this vulnerability by accessing unauthorized information via the user interface. Cisco Bug IDs: CSCvd61932. |
| A vulnerability has been identified in Primary Setup Tool (PST) (All versions < V4.2 HF1), SIMATIC Automation Tool (All versions < V3.0), SIMATIC NET PC-Software (All versions < V14 SP1), SIMATIC PCS 7 V8.1 (All versions), SIMATIC PCS 7 V8.2 (All versions < V8.2 SP1), SIMATIC STEP 7 (TIA Portal) V13 (All versions < V13 SP2), SIMATIC STEP 7 (TIA Portal) V14 (All versions < V14 SP1), SIMATIC STEP 7 V5.X (All versions < V5.6), SIMATIC WinAC RTX 2010 SP2 (All versions), SIMATIC WinAC RTX F 2010 SP2 (All versions), SIMATIC WinCC (TIA Portal) V13 (All versions < V13 SP2), SIMATIC WinCC (TIA Portal) V14 (All versions < V14 SP1), SIMATIC WinCC V7.2 and prior (All versions), SIMATIC WinCC V7.3 (All versions < V7.3 Update 15), SIMATIC WinCC V7.4 (All versions < V7.4 SP1 Upd1), SIMATIC WinCC flexible 2008 (All versions < flexible 2008 SP5), SINAUT ST7CC (All versions installed in conjunction with SIMATIC WinCC < V7.3 Update 15), SINEMA Server (All versions < V14), SINUMERIK 808D Programming Tool (All versions < V4.7 SP4 HF2), SMART PC Access (All versions < V2.3), STEP 7 - Micro/WIN SMART (All versions < V2.3), Security Configuration Tool (SCT) (All versions < V5.0). Specially crafted PROFINET DCP broadcast packets sent to the affected products on a local Ethernet segment (Layer 2) could cause a Denial-of-Service condition of some services. The services require manual restart to recover. |
| A vulnerability was discovered in Siemens SIMATIC WinCC (V7.3 before Upd 11 and V7.4 before SP1), SIMATIC WinCC Runtime Professional (V13 before SP2 and V14 before SP1), SIMATIC WinCC (TIA Portal) Professional (V13 before SP2 and V14 before SP1) that could allow an authenticated, remote attacker who is member of the "administrators" group to crash services by sending specially crafted messages to the DCOM interface. |
| An issue was discovered in by-email/by-email.php in the Invite Anyone plugin before 1.3.15 for WordPress. A user is able to change the subject and the body of the invitation mail that should be immutable, which facilitates a social engineering attack. |
