| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| GraphicsMagick before 8e56520 has a heap-based buffer over-read in ReadJXLImage in coders/jxl.c, related to an ImportViewPixelArea call. |
| MicroDicom DICOM Viewer is vulnerable to an out-of-bounds read which may allow an attacker to cause memory corruption within the application. The user must open a malicious DCM file for exploitation. |
| In the Linux kernel before 4.8, usb_parse_endpoint in drivers/usb/core/config.c does not validate the wMaxPacketSize field of an endpoint descriptor. NOTE: This vulnerability only affects products that are no longer supported by the supplier. |
| Out-of-bounds read for some Intel(R) Graphics Driver software may allow an authenticated user to potentially enable information disclosure via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: avoid out of bounds shift
UBSAN catches undefined behavior in blk-iocost, where sometimes
iocg->delay is shifted right by a number that is too large,
resulting in undefined behavior on some architectures.
[ 186.556576] ------------[ cut here ]------------
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1366:23
shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long')
CPU: 16 PID: 0 Comm: swapper/16 Tainted: G S E N 6.9.0-0_fbk700_debug_rc2_kbuilder_0_gc85af715cac0 #1
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020
Call Trace:
<IRQ>
dump_stack_lvl+0x8f/0xe0
__ubsan_handle_shift_out_of_bounds+0x22c/0x280
iocg_kick_delay+0x30b/0x310
ioc_timer_fn+0x2fb/0x1f80
__run_timer_base+0x1b6/0x250
...
Avoid that undefined behavior by simply taking the
"delay = 0" branch if the shift is too large.
I am not sure what the symptoms of an undefined value
delay will be, but I suspect it could be more than a
little annoying to debug. |
| IBM Cloud Pak for Automation 18.0.0, 18.0.1, 18.0.2, 19.0.1, 19.0.2, 19.0.3, 20.0.1, 20.0.2, 20.0.3, 21.0.1, 21.0.2, 21.0.3, 22.0.1, and 22.0.2 is potentially vulnerable to CSV Injection. A remote attacker could execute arbitrary commands on the system, caused by improper validation of csv file contents. IBM X-Force ID: 259354. |
| A vulnerability has been identified in SIMATIC PCS 7 V9.1 (All versions < V9.1 SP2 UC04), SIMATIC WinCC Runtime Professional V17 (All versions < V17 Update 8), SIMATIC WinCC Runtime Professional V18 (All versions < V18 Update 4), SIMATIC WinCC Runtime Professional V19 (All versions < V19 Update 1), SIMATIC WinCC V7.5 (All versions < V7.5 SP2 Update 16), SIMATIC WinCC V8.0 (All versions < V8.0 Update 5). The affected products do not properly validate the input provided in the login dialog box. An attacker could leverage this vulnerability to cause a persistent denial of service condition. |
| A vulnerability has been identified in Solid Edge SE2024 (All versions < V224.0 Update 5). The affected application is vulnerable to heap-based buffer overflow while parsing specially crafted PAR files. This could allow an attacker to execute code in the context of the current process. |
| In some cases, the ktrace facility will log the contents of kernel structures to userspace. In one such case, ktrace dumps a variable-sized sockaddr to userspace. There, the full sockaddr is copied, even when it is shorter than the full size. This can result in up to 14 uninitialized bytes of kernel memory being copied out to userspace.
It is possible for an unprivileged userspace program to leak 14 bytes of a kernel heap allocation to userspace. |
| A stack buffer overflow has been identified in the AsIO3.sys driver. This vulnerability can be triggered by input manipulation, may leading to a system crash (BSOD) or other potentially undefined execution.
Refer to the 'Security Update for Armoury Crate App' section on the ASUS Security Advisory for more information. |
| The function dns_copy_qname in dns_pack.c performs performs a memcpy operation with an untrusted field and does not check if the source buffer is large enough to contain the copied data. |
| A vulnerability, which was classified as critical, has been found in Tenda AC6 15.03.05.16. Affected by this issue is some unknown functionality of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was found in Tenda AC8 16.03.34.06 and classified as critical. This issue affects the function sub_49E098 of the file /goform/SetIpMacBind of the component Parameter Handler. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was found in i-Drive i11 and i12 up to 20250227. It has been rated as critical. Affected by this issue is some unknown functionality of the component Device Setting Handler. The manipulation leads to improper access control for register interface. The attack needs to be done within the local network. The complexity of an attack is rather high. The exploitation is known to be difficult. It was not possible to identify the current maintainer of the product. It must be assumed that the product is end-of-life. |
| A vulnerability classified as critical was found in Tenda TX3 16.03.13.11_multi. This vulnerability affects unknown code of the file /goform/SetStaticRouteCfg. The manipulation of the argument list leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability, which was classified as critical, was found in Tenda TX3 16.03.13.11_multi. Affected is an unknown function of the file /goform/openSchedWifi. The manipulation of the argument schedStartTime/schedEndTime leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through out-of-bounds read. |
| Illustrator versions 29.1, 28.7.3 and earlier are affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| An Out-of-Bounds Read vulnerability in
the routing protocol daemon (rpd) of
Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, logically adjacent BGP peer sending a specifically malformed BGP packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
This issue only affects systems configured in
either of two ways:
* systems with BGP traceoptions enabled
* systems with BGP family traffic-engineering (BGP-LS)
configured
and can be exploited from a directly connected and configured BGP peer.
This issue affects iBGP and eBGP
with
any address family
configured, and both IPv4 and IPv6 are affected by this vulnerability.
This issue affects:
Junos OS:
*
from 21.4 before 21.4R3-S9,
* from 22.2 before 22.2R3-S5,
* from 22.3 before 22.3R3-S4,
* from 22.4 before 22.4R3-S5,
* from 23.2 before 23.2R2-S3,
* from 23.4 before 23.4R2-S3,
* from 24.2 before 24.2R1-S2, 24.2R2;
Junos OS Evolved:
* from 21.4-EVO before 21.4R3-S9-EVO,
* from 22.2-EVO before 22.2R3-S5-EVO,
* from 22.3-EVO before 22.3R3-S4-EVO,
* from 22.4-EVO before 22.4R3-S5-EVO,
* from 23.2-EVO before 23.2R2-S3-EVO,
* from 23.4-EVO before 23.4R2-S2-EVO,
* from 24.2-EVO before 24.2R1-S2-EVO, 24.2R2-EVO.
This issue does not affect versions of Junos OS prior to 21.3R1.
This issue does not affect versions of Junos OS Evolved prior to 21.3R1-EVO.
This is a similar, but different vulnerability than the issue reported as CVE-2024-39516. |
| in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through out-of-bounds read. |
