| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in the Oracle U.S. Federal Financials product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle U.S. Federal Financials. Successful attacks of this vulnerability can result in takeover of Oracle U.S. Federal Financials. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| There is an out of bounds write vulnerability due to improper bounds checking resulting in a large destination address when parsing a DSB file with Digilent DASYLab. This vulnerability may result in arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted DSB file. The vulnerability affects all versions of DASYLab. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) include PEC byte in pmbus_block_xfer read buffer
adm1266_pmbus_block_xfer() sets up the read transaction with
.buf = data->read_buf,
.len = ADM1266_PMBUS_BLOCK_MAX + 2,
but read_buf in struct adm1266_data is declared as
u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
For a max-length block response (length byte = 255 + up to 1 PEC
byte), the i2c controller is told to write 257 bytes into a 256-byte
buffer, putting one byte past the end of read_buf. The same response
also makes the subsequent PEC compare
if (crc != msgs[1].buf[msgs[1].buf[0] + 1])
read a byte beyond the array.
Bump the read_buf declaration to ADM1266_PMBUS_BLOCK_MAX + 2 so the
buffer can hold the length byte, up to 255 payload bytes, and the PEC
byte the i2c_msg length already accounts for. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) reject implausible blackbox record_count
adm1266_nvmem_read_blackbox() loops over a record_count that comes
straight from byte 3 of the BLACKBOX_INFO response. The destination
buffer is data->dev_mem, sized for the nvmem cell's declared 2048
bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64).
A device that reports a record_count greater than 32 -- whether due
to firmware bugs, bus corruption, or a non-responsive slave returning
0xff -- would walk read_buff past the end of the dev_mem allocation
on the trailing iterations.
Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here)
before entering the loop and return -EIO on any larger value, so a
malformed BLACKBOX_INFO response cannot drive the loop out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/aux: Fix page UAF in map_range()
map_range() reads rb->aux_pages[], rb->aux_nr_pages and rb->aux_pgoff via
perf_mmap_to_page() while holding only event->mmap_mutex. Those fields are
serialized by rb->aux_mutex, and mmap_mutex is per event.
Thus, two events sharing one rb via PERF_EVENT_IOC_SET_OUTPUT can race
rb_alloc_aux() with map_range(), leading to a page-UAF scenario as follows:
CPU 0 CPU 1
===== =====
rb_alloc_aux() map_range()
[1]: allocate rb->aux_pages[0]
[2]: rb->aux_nr_pages++
[3]: perf_mmap_to_page()
returns rb->aux_pages[0]
[4]: map it as VM_PFNMAP
[5]: rb->aux_pgoff = 1
munmap the page
[6]: free rb->aux_pages[0]
Pages mapped as VM_PFNMAP have no refcount protection, so CPU 1 holds a
mapping to a freed physical frame.
Fix this by taking rb->aux_mutex across the page walk in map_range(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix freeing of PMD-sized vmemmap pages
Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from
freeing non-boot page tables through __free_pages() to
pagetable_free().
However, the function is also called to free vmemmap pages.
Given that vmemmap pages are not page tables, already the page_ptdesc(page)
is wrong. But worse, pagetable_free() calls:
__free_pages(page, compound_order(page));
Since vmemmap pages are not compound pages (see vmemmap_alloc_block())
-- except for HVO, which doesn't apply here -- only first page of a
PMD-sized vmemmap page is freed, leaking the other ones.
Fix it by properly decoupling pagetable and vmemmap freeing.
free_pagetable() no longer has to mess with SECTION_INFO, as only the
vmemmap is marked like that in register_page_bootmem_memmap().
The indentation in remove_pmd_table() is messed up. Fix that while
touching it.
Bootmem info handling will soon be fixed up. For now, handle it
similar to free_pagetable(), just avoiding the ifdef.
[ dhansen: changelog munging. More imperative voice ] |
| n8n before 1.123.67, 2.31.5, and 2.32.1 contains a SQL injection vulnerability in the PostgresTrigger node, which interpolates user-supplied identifier parameters (channel, function, and trigger names) into SQL statements without proper escaping. An authenticated user can inject arbitrary SQL executed against the connected PostgreSQL database with the configured credential's privileges, allowing full read and write access. |
| There is a memory corruption vulnerability recently
discovered in NI LabVIEW that may result in information disclosure or arbitrary
code execution. Successful exploitation requires an attacker to get a
user to open a specially crafted VI. This vulnerability affects NI
LabVIEW 2026 Q3 (26.3.0) and prior versions. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup()
The dwc3_ulpi_setup() calls the register read and write calls with
dwc3->regs when both these calls take the dwc3 structure directly.
Chnage these two calls to fix the following sparse warning, and
possibly a nasty bug in the dwc3_ulpi_setup() code:
drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs
drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info()
cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with
cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream
mapping update fails, the error path frees the allocated stream rings
and stream_rings array, but leaves stream_ctx_array allocated.
Free the stream context array before falling through to the stream_rings
cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: mtu3: unmap request DMA on queue failure
mtu3_gadget_queue() maps the request before checking whether
the QMU GPD ring can accept another transfer. the request is
returned with -EAGAIN before it is linked on the endpoint
request list if mtu3_prepare_transfer() fails.
Normal completion and dequeue paths unmap requests from
mtu3_req_complete(), but this error path never reaches that
helper, so the DMA mapping is left active. Unmap the request
before returning from the failed queue path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: bound bulk IN response length to the received transfer
usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of
the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len)
into the caller's buffer. bpkt_len is fully controlled by the device
and is only checked against ibuf_len; ibuf_len in turn is checked
against usbio->txbuf_len, not against rxbuf_len:
if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) ||
(ibuf_len > (usbio->txbuf_len - sizeof(*bpkt))))
return -EMSGSIZE;
txbuf_len and rxbuf_len are taken independently from the bulk OUT and
bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or
malfunctioning device that advertises a large bulk OUT endpoint and a
small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such
as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and
hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then
reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab
object. The over-read bytes are handed back to the i2c layer and on to
user space through i2c-dev, disclosing adjacent slab memory; with KASAN
this is reported as a slab-out-of-bounds read.
The number of bytes actually received is already known: act equals the
URB actual_length and is bounded by rxbuf_len. Reject any response
that claims more payload than was received, mirroring the existing
"act < sizeof(*bpkt)" check just above.
The control path (usbio_ctrl_msg()) is not affected: it uses a single
buffer (ctrlbuf) for both directions, so its analogous copy can never
leave the allocation.
Found by code review. The out-of-bounds read was confirmed under
AddressSanitizer with a faithful userspace model of usbio_bulk_msg()'s
receive path (an rxbuf_len-sized buffer, the same act/ibuf_len/bpkt_len
checks and the memcpy). A USB raw-gadget + dummy_hcd reproducer is
also available. |
| Incorrect access control in the setWiFiEasyGuestCf function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to create or weaken guest wireless access via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the UploadFirmwareFile function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to upload a crafted firmware image via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| A Broken Object Level Authorization vulnerability exists in Grashjs Atlas CMMS prior to v1.6.0. An authenticated user from one tenant can read and modify another tenant's company record by changing only the numeric ID in the /company/{id} endpoint. The application does not enforce tenant-level ownership checks when accessing or updating company objects, allowing cross-tenant access and modification of company profile data. |
| Eclipse aeriOS Self-orchestrator versions prior to 1.2.1 contain a path traversal vulnerability in the REST API. User-controlled identifiers used to create, update, or delete Self-orchestrator resources were incorporated into filesystem paths without adequate validation or sanitization. An unauthenticated remote attacker able to access the Self-orchestrator API could therefore supply specially crafted identifiers containing path traversal sequences to write or delete JSON files outside the intended application directories, subject to the filesystem permissions of the Self-orchestrator process.
The impact is increased by the absence of authentication on the affected API and by the container running with elevated privileges in the affected deployment configuration.
The issue has been addressed in version 1.2.1 by introducing validation and sanitization of user-controlled identifiers before they are used to construct filesystem paths, preventing path separator characters from being used to escape the intended directories. |
| Phison PS3111-S11 controller firmware versions through SBFQT1.3 expose privileged vendor unique commands over the ATA interface with absent or defeatable authentication mechanisms. Attackers can bypass the weak CRC-16 based unlock handshake or exploit builds with no VUC lock to read and write controller memory and raw flash, persisting implants across power cycles. |
| The Booking for Appointments and Events Calendar – Amelia (Premium) plugin for WordPress is vulnerable to Privilege Escalation in versions 8.0 - 9.6.2. This is due to insufficient validation of the attacker-controlled 'type' parameter in the customer update endpoint, which allows customers to set their role to 'manager' and trigger creation of a WordPress user with the wpamelia-manager role when the 'externalId' parameter is set to 0. This makes it possible for unauthenticated attackers to escalate their privileges to administrator by first elevating to the manager role, then creating a provider entity linked to an administrator user ID and overwriting that administrator's password. |
| The Solace Extra WordPress plugin before 1.7.0 does not perform any authorization or post-status checks in one of its AJAX actions, allowing unauthenticated visitors to read the content of non-published (draft, pending, private, and trashed) Site Builder parts that WordPress would otherwise not serve. |
| The Social Media Share Buttons & Social Sharing Icons WordPress plugin before 3.0.1 does not escape the post title before outputting it in an inline JavaScript event handler, allowing users with the Contributor role and above to perform Stored Cross-Site Scripting attacks which are triggered when a visitor interacts with the affected button.
Exploitation requires the Social Media Share Buttons & Social Sharing Icons WordPress plugin before 3.0.1 to be running a non-default icon display configuration. |
