| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Out-of-bounds Read vulnerability in the advanced forwarding management process aftman of Juniper Networks Junos OS on MX Series with MPC10E, MPC11, MX10K-LC9600 line cards, MX304, and EX9200-15C, may allow an attacker to exploit a stack-based buffer overflow, leading to a reboot of the FPC.
Through code review, it was determined that the interface definition code for aftman could read beyond a buffer boundary, leading to a stack-based buffer overflow.
This issue affects Junos OS on MX Series and EX9200-15C:
* from 21.2 before 21.2R3-S1,
* from 21.4 before 21.4R3,
* from 22.1 before 22.1R2,
* from 22.2 before 22.2R2;
This issue does not affect:
* versions of Junos OS prior to 20.3R1;
* any version of Junos OS 20.4. |
| A vulnerability, which was classified as critical, has been found in Tenda AX1803 1.0.0.1. This issue affects the function formSetSysToolDDNS of the file /goform/SetDDNSCfg. The manipulation of the argument serverName/ddnsUser/ddnsPwd/ddnsDomain leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-262127. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| Argo Helm is a collection of community maintained charts for `argoproj.github.io` projects. Prior to version 0.45.0, the `workflow-role`) lacks granularity in its privileges, giving permissions to `workflowtasksets` and `workflowartifactgctasks` to all workflow Pods, when only certain types of Pods created by the Controller require these privileges. The impact is minimal, as an attack could only affect status reporting for certain types of Pods and templates. Version 0.45.0 fixes the issue. |
|
RoboDK v5.5.4
is vulnerable to heap-based buffer overflow while processing a specific project file. The resulting memory corruption may crash the application.
|
| A buffer overflow vulnerability has been identified in the Internet Printing Protocol (IPP) in various Lexmark devices. The vulnerability can be leveraged by an attacker to execute arbitrary code. |
| A vulnerability, which was classified as critical, has been found in Tenda G3 15.11.0.17(9502). This issue affects the function formModifyPppAuthWhiteMac of the file /goform/ModifyPppAuthWhiteMac. The manipulation of the argument pppoeServerWhiteMacIndex leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-261983. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been identified in Solid Edge (All versions < V224.0 Update 5). The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted PAR files. This could allow an attacker to execute code in the context of the current process. |
| EDK2 contains a vulnerability in the HashPeImageByType(). A user may cause a read out of bounds when a corrupted data pointer and length are sent via an adjecent network. A successful exploit of this vulnerability may lead to a loss of Integrity and/or Availability. |
| GNU objdump 2.43 is vulnerable to Buffer Overflow in the BFD (Binary File Descriptor) library's handling of tekhex format files. |
| On 64-bit systems, the implementation of VOP_VPTOFH() in the cd9660, tarfs and ext2fs filesystems overflows the destination FID buffer by 4 bytes, a stack buffer overflow.
A NFS server that exports a cd9660, tarfs, or ext2fs file system can be made to panic by mounting and accessing the export with an NFS client. Further exploitation (e.g., bypassing file permission checking or remote kernel code execution) is potentially possible, though this has not been demonstrated. In particular, release kernels are compiled with stack protection enabled, and some instances of the overflow are caught by this mechanism, causing a panic. |
| The vulnerability exists in the password storage of Mobateks MobaXterm in versions below 25.0. MobaXTerm uses an initialisation vector (IV) consisting only of zero bytes and a master key to encrypt each password individually. In the default configuration, on opening MobaXTerm, the user is prompted for their password. A derivative of the password is used as the master key. As both the master key and the IV are the same for each stored password, the AES CFB ciphertext depends only on the plaintext (the password). The static IV and master key make it easier to obtain sensitive information and to decrypt data when it is stored at rest. |
| A vulnerability classified as critical has been found in TOTOLINK X18 9.1.0cu.2024_B20220329. Affected is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi. The manipulation as part of String leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability, which was classified as critical, has been found in Tenda TX3 16.03.13.11_multi. This issue affects some unknown processing of the file /goform/SetNetControlList. The manipulation of the argument list leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| An Out-of-bounds Read vulnerability in Juniper Networks Junos OS and Junos OS Evolved's routing protocol daemon (rpd) allows an unauthenticated, network-based attacker to send malformed BGP packets to a device configured with packet receive trace options enabled to crash rpd.
This issue affects:
Junos OS:
* from 21.2R3-S8 before 21.2R3-S9,
* from 21.4R3-S7 before 21.4R3-S9,
* from 22.2R3-S4 before 22.2R3-S5,
* from 22.3R3-S2 before 22.3R3-S4,
* from 22.4R3 before 22.4R3-S5,
* from 23.2R2 before 23.2R2-S2,
* from 23.4R1 before 23.4R2-S1,
* from 24.2R1 before 24.2R1-S1, 24.2R2.
Junos OS Evolved:
* from 21.4R3-S7-EVO before 21.4R3-S9-EVO,
* from 22.2R3-S4-EVO before 22.2R3-S5-EVO,
* from 22.3R3-S2-EVO before 22.3R3-S4-EVO,
* from 22.4R3-EVO before 22.4R3-S5-EVO,
* from 23.2R2-EVO before 23.2R2-S2-EVO,
* from 23.4R1-EVO before 23.4R2-S1-EVO,
* from 24.2R1-EVO before 24.2R1-S2-EVO, 24.2R2-EVO.
This issue requires a BGP session to be established.
This issue can propagate and multiply through multiple ASes until reaching vulnerable devices.
This issue affects iBGP and eBGP.
This issue affects IPv4 and IPv6.
An indicator of compromise may be the presence of malformed update messages in a neighboring AS which is unaffected by this issue:
For example, by issuing the command on the neighboring device:
show log messages
Reviewing for similar messages from devices within proximity to each other may indicate this malformed packet is propagating:
rpd[<pid>]: Received malformed update from <IP address> (External AS <AS#>)
and
rpd[<pid>]: Malformed Attribute |
| in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through out-of-bounds read. |
| Delta Electronics CNCSoft-G2 lacks proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. If a target visits a malicious page or opens a malicious file an attacker can leverage this vulnerability to execute code in the context of the current process. |
| A heap buffer overflow vulnerability in FFmpeg before commit 4bf784c allows attackers to trigger a memory corruption via supplying a crafted media file in avformat when processing tile grid group streams. This can lead to a Denial of Service (DoS). |
| in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through buffer overflow. |
| A vulnerability, which was classified as critical, was found in Tenda G3 15.11.0.17(9502). Affected is the function modifyDhcpRule of the file /goform/modifyDhcpRule. The manipulation of the argument bindDhcpIndex leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-261984. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been identified in Solid Edge (All versions < V224.0 Update 2). The affected applications contain a stack overflow vulnerability while parsing specially crafted PAR files. This could allow an attacker to execute code in the context of the current process. |
