| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
udmabuf: Set the DMA mask for the udmabuf device (v2)
If the DMA mask is not set explicitly, the following warning occurs
when the userspace tries to access the dma-buf via the CPU as
reported by syzbot here:
WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188
__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188
Modules linked in:
CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted
5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188
Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0
83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45
31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00
RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408
RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f
R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002
R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000
FS: 0000555556e30300(0000) GS:ffff8880b9d00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264
get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72
begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126
dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164
dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f62fcf530f9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9
RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
v2: Dont't forget to deregister if DMA mask setup fails. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Prevent NULL pointer dereference in steam_{recv,send}_report
It is possible for a malicious device to forgo submitting a Feature
Report. The HID Steam driver presently makes no prevision for this
and de-references the 'struct hid_report' pointer obtained from the
HID devices without first checking its validity. Let's change that. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't use tnum_range on array range checking for poke descriptors
Hsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which
is based on a customized syzkaller:
BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0
Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489
CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x9c/0xc9
print_address_description.constprop.0+0x1f/0x1f0
? bpf_int_jit_compile+0x1257/0x13f0
kasan_report.cold+0xeb/0x197
? kvmalloc_node+0x170/0x200
? bpf_int_jit_compile+0x1257/0x13f0
bpf_int_jit_compile+0x1257/0x13f0
? arch_prepare_bpf_dispatcher+0xd0/0xd0
? rcu_read_lock_sched_held+0x43/0x70
bpf_prog_select_runtime+0x3e8/0x640
? bpf_obj_name_cpy+0x149/0x1b0
bpf_prog_load+0x102f/0x2220
? __bpf_prog_put.constprop.0+0x220/0x220
? find_held_lock+0x2c/0x110
? __might_fault+0xd6/0x180
? lock_downgrade+0x6e0/0x6e0
? lock_is_held_type+0xa6/0x120
? __might_fault+0x147/0x180
__sys_bpf+0x137b/0x6070
? bpf_perf_link_attach+0x530/0x530
? new_sync_read+0x600/0x600
? __fget_files+0x255/0x450
? lock_downgrade+0x6e0/0x6e0
? fput+0x30/0x1a0
? ksys_write+0x1a8/0x260
__x64_sys_bpf+0x7a/0xc0
? syscall_enter_from_user_mode+0x21/0x70
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f917c4e2c2d
The problem here is that a range of tnum_range(0, map->max_entries - 1) has
limited ability to represent the concrete tight range with the tnum as the
set of resulting states from value + mask can result in a superset of the
actual intended range, and as such a tnum_in(range, reg->var_off) check may
yield true when it shouldn't, for example tnum_range(0, 2) would result in
00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here
represented by a less precise superset of {0, 1, 2, 3}. As the register is
known const scalar, really just use the concrete reg->var_off.value for the
upper index check. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq
storvsc_error_wq workqueue should not be marked as WQ_MEM_RECLAIM as it
doesn't need to make forward progress under memory pressure. Marking this
workqueue as WQ_MEM_RECLAIM may cause deadlock while flushing a
non-WQ_MEM_RECLAIM workqueue. In the current state it causes the following
warning:
[ 14.506347] ------------[ cut here ]------------
[ 14.506354] workqueue: WQ_MEM_RECLAIM storvsc_error_wq_0:storvsc_remove_lun is flushing !WQ_MEM_RECLAIM events_freezable_power_:disk_events_workfn
[ 14.506360] WARNING: CPU: 0 PID: 8 at <-snip->kernel/workqueue.c:2623 check_flush_dependency+0xb5/0x130
[ 14.506390] CPU: 0 PID: 8 Comm: kworker/u4:0 Not tainted 5.4.0-1086-azure #91~18.04.1-Ubuntu
[ 14.506391] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022
[ 14.506393] Workqueue: storvsc_error_wq_0 storvsc_remove_lun
[ 14.506395] RIP: 0010:check_flush_dependency+0xb5/0x130
<-snip->
[ 14.506408] Call Trace:
[ 14.506412] __flush_work+0xf1/0x1c0
[ 14.506414] __cancel_work_timer+0x12f/0x1b0
[ 14.506417] ? kernfs_put+0xf0/0x190
[ 14.506418] cancel_delayed_work_sync+0x13/0x20
[ 14.506420] disk_block_events+0x78/0x80
[ 14.506421] del_gendisk+0x3d/0x2f0
[ 14.506423] sr_remove+0x28/0x70
[ 14.506427] device_release_driver_internal+0xef/0x1c0
[ 14.506428] device_release_driver+0x12/0x20
[ 14.506429] bus_remove_device+0xe1/0x150
[ 14.506431] device_del+0x167/0x380
[ 14.506432] __scsi_remove_device+0x11d/0x150
[ 14.506433] scsi_remove_device+0x26/0x40
[ 14.506434] storvsc_remove_lun+0x40/0x60
[ 14.506436] process_one_work+0x209/0x400
[ 14.506437] worker_thread+0x34/0x400
[ 14.506439] kthread+0x121/0x140
[ 14.506440] ? process_one_work+0x400/0x400
[ 14.506441] ? kthread_park+0x90/0x90
[ 14.506443] ret_from_fork+0x35/0x40
[ 14.506445] ---[ end trace 2d9633159fdc6ee7 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
md: call __md_stop_writes in md_stop
From the link [1], we can see raid1d was running even after the path
raid_dtr -> md_stop -> __md_stop.
Let's stop write first in destructor to align with normal md-raid to
fix the KASAN issue.
[1]. https://lore.kernel.org/linux-raid/CAPhsuW5gc4AakdGNdF8ubpezAuDLFOYUO_sfMZcec6hQFm8nhg@mail.gmail.com/T/#m7f12bf90481c02c6d2da68c64aeed4779b7df74a |
| In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: fix error exit of privcmd_ioctl_dm_op()
The error exit of privcmd_ioctl_dm_op() is calling unlock_pages()
potentially with pages being NULL, leading to a NULL dereference.
Additionally lock_pages() doesn't check for pin_user_pages_fast()
having been completely successful, resulting in potentially not
locking all pages into memory. This could result in sporadic failures
when using the related memory in user mode.
Fix all of that by calling unlock_pages() always with the real number
of pinned pages, which will be zero in case pages being NULL, and by
checking the number of pages pinned by pin_user_pages_fast() matching
the expected number of pages. |
| In the Linux kernel, the following vulnerability has been resolved:
s390: fix double free of GS and RI CBs on fork() failure
The pointers for guarded storage and runtime instrumentation control
blocks are stored in the thread_struct of the associated task. These
pointers are initially copied on fork() via arch_dup_task_struct()
and then cleared via copy_thread() before fork() returns. If fork()
happens to fail after the initial task dup and before copy_thread(),
the newly allocated task and associated thread_struct memory are
freed via free_task() -> arch_release_task_struct(). This results in
a double free of the guarded storage and runtime info structs
because the fields in the failed task still refer to memory
associated with the source task.
This problem can manifest as a BUG_ON() in set_freepointer() (with
CONFIG_SLAB_FREELIST_HARDENED enabled) or KASAN splat (if enabled)
when running trinity syscall fuzz tests on s390x. To avoid this
problem, clear the associated pointer fields in
arch_dup_task_struct() immediately after the new task is copied.
Note that the RI flag is still cleared in copy_thread() because it
resides in thread stack memory and that is where stack info is
copied. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page
cache are installed in the ptes. But hugepage_add_new_anon_rmap is called
for them mistakenly because they're not vm_shared. This will corrupt the
page->mapping used by page cache code. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mprotect: only reference swap pfn page if type match
Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to
fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]:
kernel BUG at include/linux/swapops.h:117!
CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S O L 6.0.0-dbg-DEV #2
RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0
Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6
c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b
48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48
RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282
RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000
RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b
RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000
R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738
R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a
FS: 00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
change_pte_range+0x36e/0x880
change_p4d_range+0x2e8/0x670
change_protection_range+0x14e/0x2c0
mprotect_fixup+0x1ee/0x330
do_mprotect_pkey+0x34c/0x440
__x64_sys_mprotect+0x1d/0x30
It triggers because pfn_swap_entry_to_page() could be called upon e.g. a
genuine swap entry.
Fix it by only calling it when it's a write migration entry where the page*
is used.
[1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
The vmemmap pages is marked by kmemleak when allocated from memblock.
Remove it from kmemleak when freeing the page. Otherwise, when we reuse
the page, kmemleak may report such an error and then stop working.
kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing)
kmemleak: Kernel memory leak detector disabled
kmemleak: Object 0xffff98fb6be00000 (size 335544320):
kmemleak: comm "swapper", pid 0, jiffies 4294892296
kmemleak: min_count = 0
kmemleak: count = 0
kmemleak: flags = 0x1
kmemleak: checksum = 0
kmemleak: backtrace: |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: avoid use-after-free after removing device
When a disk is removed, bdi_unregister gets called to stop further
writeback and wait for associated delayed work to complete. However,
wb_inode_writeback_end() may schedule bandwidth estimation dwork after
this has completed, which can result in the timer attempting to access the
just freed bdi_writeback.
Fix this by checking if the bdi_writeback is alive, similar to when
scheduling writeback work.
Since this requires wb->work_lock, and wb_inode_writeback_end() may get
called from interrupt, switch wb->work_lock to an irqsafe lock. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix possible memory leak in btrfs_get_dev_args_from_path()
In btrfs_get_dev_args_from_path(), btrfs_get_bdev_and_sb() can fail if
the path is invalid. In this case, btrfs_get_dev_args_from_path()
returns directly without freeing args->uuid and args->fsid allocated
before, which causes memory leak.
To fix these possible leaks, when btrfs_get_bdev_and_sb() fails,
btrfs_put_dev_args_from_path() is called to clean up the memory. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lantiq_xrx200: restore buffer if memory allocation failed
In a situation where memory allocation fails, an invalid buffer address
is stored. When this descriptor is used again, the system panics in the
build_skb() function when accessing memory. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix locking in rxrpc's sendmsg
Fix three bugs in the rxrpc's sendmsg implementation:
(1) rxrpc_new_client_call() should release the socket lock when returning
an error from rxrpc_get_call_slot().
(2) rxrpc_wait_for_tx_window_intr() will return without the call mutex
held in the event that we're interrupted by a signal whilst waiting
for tx space on the socket or relocking the call mutex afterwards.
Fix this by: (a) moving the unlock/lock of the call mutex up to
rxrpc_send_data() such that the lock is not held around all of
rxrpc_wait_for_tx_window*() and (b) indicating to higher callers
whether we're return with the lock dropped. Note that this means
recvmsg() will not block on this call whilst we're waiting.
(3) After dropping and regaining the call mutex, rxrpc_send_data() needs
to go and recheck the state of the tx_pending buffer and the
tx_total_len check in case we raced with another sendmsg() on the same
call.
Thinking on this some more, it might make sense to have different locks for
sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait
for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating
that a call is dead before a sendmsg() to that call returns - but that can
currently happen anyway.
Without fix (2), something like the following can be induced:
WARNING: bad unlock balance detected!
5.16.0-rc6-syzkaller #0 Not tainted
-------------------------------------
syz-executor011/3597 is trying to release lock (&call->user_mutex) at:
[<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
but there are no more locks to release!
other info that might help us debug this:
no locks held by syz-executor011/3597.
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline]
__lock_release kernel/locking/lockdep.c:5306 [inline]
lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657
__mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900
rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
___sys_sendmsg+0xf3/0x170 net/socket.c:2463
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
[Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this] |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: fix strp_init() order and cleanup
strp_init() is called just a few lines above this csk->sk_user_data
check, it also initializes strp->work etc., therefore, it is
unnecessary to call strp_done() to cancel the freshly initialized
work.
And if sk_user_data is already used by KCM, psock->strp should not be
touched, particularly strp->work state, so we need to move strp_init()
after the csk->sk_user_data check.
This also makes a lockdep warning reported by syzbot go away. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix memory leak at failed datapath creation
ovs_dp_cmd_new()->ovs_dp_change()->ovs_dp_set_upcall_portids()
allocates array via kmalloc.
If for some reason new_vport() fails during ovs_dp_cmd_new()
dp->upcall_portids must be freed.
Add missing kfree.
Kmemleak example:
unreferenced object 0xffff88800c382500 (size 64):
comm "dump_state", pid 323, jiffies 4294955418 (age 104.347s)
hex dump (first 32 bytes):
5e c2 79 e4 1f 7a 38 c7 09 21 38 0c 80 88 ff ff ^.y..z8..!8.....
03 00 00 00 0a 00 00 00 14 00 00 00 28 00 00 00 ............(...
backtrace:
[<0000000071bebc9f>] ovs_dp_set_upcall_portids+0x38/0xa0
[<000000000187d8bd>] ovs_dp_change+0x63/0xe0
[<000000002397e446>] ovs_dp_cmd_new+0x1f0/0x380
[<00000000aa06f36e>] genl_family_rcv_msg_doit+0xea/0x150
[<000000008f583bc4>] genl_rcv_msg+0xdc/0x1e0
[<00000000fa10e377>] netlink_rcv_skb+0x50/0x100
[<000000004959cece>] genl_rcv+0x24/0x40
[<000000004699ac7f>] netlink_unicast+0x23e/0x360
[<00000000c153573e>] netlink_sendmsg+0x24e/0x4b0
[<000000006f4aa380>] sock_sendmsg+0x62/0x70
[<00000000d0068654>] ____sys_sendmsg+0x230/0x270
[<0000000012dacf7d>] ___sys_sendmsg+0x88/0xd0
[<0000000011776020>] __sys_sendmsg+0x59/0xa0
[<000000002e8f2dc1>] do_syscall_64+0x3b/0x90
[<000000003243e7cb>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: fix null pointer dereference
Asus chromebook CX550 crashes during boot on v5.17-rc1 kernel.
The root cause is null pointer defeference of bi_next
in tgl_get_bw_info() in drivers/gpu/drm/i915/display/intel_bw.c.
BUG: kernel NULL pointer dereference, address: 000000000000002e
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G U 5.17.0-rc1
Hardware name: Google Delbin/Delbin, BIOS Google_Delbin.13672.156.3 05/14/2021
RIP: 0010:tgl_get_bw_info+0x2de/0x510
...
[ 2.554467] Call Trace:
[ 2.554467] <TASK>
[ 2.554467] intel_bw_init_hw+0x14a/0x434
[ 2.554467] ? _printk+0x59/0x73
[ 2.554467] ? _dev_err+0x77/0x91
[ 2.554467] i915_driver_hw_probe+0x329/0x33e
[ 2.554467] i915_driver_probe+0x4c8/0x638
[ 2.554467] i915_pci_probe+0xf8/0x14e
[ 2.554467] ? _raw_spin_unlock_irqrestore+0x12/0x2c
[ 2.554467] pci_device_probe+0xaa/0x142
[ 2.554467] really_probe+0x13f/0x2f4
[ 2.554467] __driver_probe_device+0x9e/0xd3
[ 2.554467] driver_probe_device+0x24/0x7c
[ 2.554467] __driver_attach+0xba/0xcf
[ 2.554467] ? driver_attach+0x1f/0x1f
[ 2.554467] bus_for_each_dev+0x8c/0xc0
[ 2.554467] bus_add_driver+0x11b/0x1f7
[ 2.554467] driver_register+0x60/0xea
[ 2.554467] ? mipi_dsi_bus_init+0x16/0x16
[ 2.554467] i915_init+0x2c/0xb9
[ 2.554467] ? mipi_dsi_bus_init+0x16/0x16
[ 2.554467] do_one_initcall+0x12e/0x2b3
[ 2.554467] do_initcall_level+0xd6/0xf3
[ 2.554467] do_initcalls+0x4e/0x79
[ 2.554467] kernel_init_freeable+0xed/0x14d
[ 2.554467] ? rest_init+0xc1/0xc1
[ 2.554467] kernel_init+0x1a/0x120
[ 2.554467] ret_from_fork+0x1f/0x30
[ 2.554467] </TASK>
...
Kernel panic - not syncing: Fatal exception
(cherry picked from commit c247cd03898c4c43c3bce6d4014730403bc13032) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Do mark_chain_precision for ARG_CONST_ALLOC_SIZE_OR_ZERO
Precision markers need to be propagated whenever we have an ARG_CONST_*
style argument, as the verifier cannot consider imprecise scalars to be
equivalent for the purposes of states_equal check when such arguments
refine the return value (in this case, set mem_size for PTR_TO_MEM). The
resultant mem_size for the R0 is derived from the constant value, and if
the verifier incorrectly prunes states considering them equivalent where
such arguments exist (by seeing that both registers have reg->precise as
false in regsafe), we can end up with invalid programs passing the
verifier which can do access beyond what should have been the correct
mem_size in that explored state.
To show a concrete example of the problem:
0000000000000000 <prog>:
0: r2 = *(u32 *)(r1 + 80)
1: r1 = *(u32 *)(r1 + 76)
2: r3 = r1
3: r3 += 4
4: if r3 > r2 goto +18 <LBB5_5>
5: w2 = 0
6: *(u32 *)(r1 + 0) = r2
7: r1 = *(u32 *)(r1 + 0)
8: r2 = 1
9: if w1 == 0 goto +1 <LBB5_3>
10: r2 = -1
0000000000000058 <LBB5_3>:
11: r1 = 0 ll
13: r3 = 0
14: call bpf_ringbuf_reserve
15: if r0 == 0 goto +7 <LBB5_5>
16: r1 = r0
17: r1 += 16777215
18: w2 = 0
19: *(u8 *)(r1 + 0) = r2
20: r1 = r0
21: r2 = 0
22: call bpf_ringbuf_submit
00000000000000b8 <LBB5_5>:
23: w0 = 0
24: exit
For the first case, the single line execution's exploration will prune
the search at insn 14 for the branch insn 9's second leg as it will be
verified first using r2 = -1 (UINT_MAX), while as w1 at insn 9 will
always be 0 so at runtime we don't get error for being greater than
UINT_MAX/4 from bpf_ringbuf_reserve. The verifier during regsafe just
sees reg->precise as false for both r2 registers in both states, hence
considers them equal for purposes of states_equal.
If we propagated precise markers using the backtracking support, we
would use the precise marking to then ensure that old r2 (UINT_MAX) was
within the new r2 (1) and this would never be true, so the verification
would rightfully fail.
The end result is that the out of bounds access at instruction 19 would
be permitted without this fix.
Note that reg->precise is always set to true when user does not have
CAP_BPF (or when subprog count is greater than 1 (i.e. use of any static
or global functions)), hence this is only a problem when precision marks
need to be explicitly propagated (i.e. privileged users with CAP_BPF).
A simplified test case has been included in the next patch to prevent
future regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: Fix null pointer dereference in remove if xHC has only one roothub
The remove path in xhci platform driver tries to remove and put both main
and shared hcds even if only a main hcd exists (one roothub)
This causes a null pointer dereference in reboot for those controllers.
Check that the shared_hcd exists before trying to remove it. |
