| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle buffer allocation failure in bnxt_rx_ring_reset()
bnxt_rx_ring_reset() frees the ring buffers and then reallocates them,
ignoring the result.
bnxt_alloc_one_rx_ring() can fail in bnxt_alloc_one_tpa_info_data(), which
returns -ENOMEM on the first failed allocation and leaves the remaining
rxr->rx_tpa[] entries zeroed.
The error isn't propagated up, so the loop in bnxt_rx_ring_reset
continues and at the end the code re-enables TPA with partially
unallocated rx_tpa array.
This means that when the agg_id from hardware is mapped to a SW index in
rxr->rx_tpa[], an uninitialized slot can be chosen which would hand a
zero DMA address to the device.
Fix this by falling back to a global reset, which is what the existing
code already does when other functions fail, but unlike the other
failure cases this particular failure has to return because TPA can't
be re-enabled since the allocation failed. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix heap overflow in DACL owner/group rewrite
When id_mode_to_cifs_acl rewrites an existing DACL, it allocates a
buffer sized according to the on-disk DACL length reported by
dacl_ptr->size. However, replace_sids_and_copy_aces may rewrite each
ACE with a new owner/group SID obtained from the cifs.idmap upcall.
Those SIDs can have up to SID_MAX_SUB_AUTHORITIES (15) sub-authorities,
making each ACE up to 76 bytes (sizeof(struct smb_ace)).
If the original DACL contains short SIDs (e.g., 1 sub-authority) while
the replacement SIDs are long, the rewritten ACEs overflow the
allocation.
Fix this by always budgeting for worst-case SID expansion: allocate
sizeof(struct smb_acl) plus num_aces * sizeof(struct smb_ace), which
covers the smb_acl header and room for every ACE at maximum SID size.
This replaces the previous split logic that used dacl_ptr->size for
cifsacl mounts but num_aces * sizeof(struct smb_ace) for mode_from_sid
mounts: both paths can trigger the same rewrite and need the same
headroom.
KASAN reports this as:
BUG: KASAN: slab-out-of-bounds in build_sec_desc+0x1e8a/0x2680 [cifs]
Write of size 4 at addr ffff8881a5e25374 by task chown/5298
...
The buggy address is located 0 bytes to the right of
allocated 884-byte region [ffff8881a5e25000, ffff8881a5e25374) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock
The fcport->unsol_ctx_head list is modified from several contexts without
a common lock. Entries are added in qla2xxx_process_purls_iocb() from the
response queue ISR (under the qpair qp_lock), while they are removed from
qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp()
(NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB
completion). The qpair qp_lock cannot serialize this per-fcport list since
multiqueue adapters add entries through different qpairs, so a concurrent
add and delete (or two concurrent deletes) can corrupt the list pointers.
Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in
qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del()
on unsol_ctx_head. The add nests under the existing qp_lock; no delete path
takes qp_lock, so the lock order is consistent and deadlock free. |
| RouterOS WebFig contains an unauthenticated file-read vulnerability in the /jsproxy path where a newly allocated session retains a stale uninitialized principal pointer used for file authorization. An unauthenticated attacker can prepare the allocator so that the file-serving path dereferences this pointer with sufficient rights, then supply parent-directory components in an encrypted URI to escape the WebFig file namespace and disclose root-owned files, including configuration stores containing credentials.This issue affects only 7.x branch was fixed in versions: 7.23.4 (Long-term) and 7.24.2 (Stable) |
| Incorrect Authorization vulnerability in TÜBİTAK ULAKBİM UlakPDF allows Authentication Bypass.
This issue affects UlakPDF: through 09092026. |
| A security flaw has been discovered in Open-Web-Analytics up to 1.8.1. Affected is the function Event::loadFromArray of the file queue.php of the component Remote Event Queue Endpoint. Performing a manipulation results in deserialization. The attack can be initiated remotely. Upgrading to version 1.8.2 is able to address this issue. The patch is named 78c1222ec0e2119d84684032da1541120a2cdd23. The affected component should be upgraded. |
| phpIPAM through 1.8.3 has incorrect authorization for id=="admins" and id=="all" in api/controllers/User.php. |
| ITFlow before 26.08 allows SVG attachments in the ticket email parser (cron/ticket_email_parser.php) for email messages that may arrive over SMTP from arbitrary senders. |
| The Themify Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'css[fonts]' Parameter in all versions up to, and including, 7.8.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The nonce required to reach the vulnerable endpoint is embedded in plain sight within the front-end page markup for all visitors, reducing the access control to a CSRF token rather than an authentication barrier and making the endpoint fully exploitable by unauthenticated attackers. |
| The Optima Express IDX plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 8.7.5. This is due to the `provisionBlogCredentials()` function in `iHomefinderAdmin.php` being reachable via the `wp_ajax_nopriv_ihf_clear_cache` AJAX action — through the call chain `iHomefinderAjaxHandler::clearCache()` → `activateAuthenticationToken()` → `getAuthenticationInfo()` → `provisionBlogCredentials()` — with no capability check, nonce verification, or ownership validation, and the function unconditionally calling `$user->set_role('author')` on whichever WordPress account matches the hard-coded login `optima-express` via `get_user_by('login', 'optima-express')`. This makes it possible for unauthenticated attackers to escalate a pre-registered `optima-express` account to the Author role, gaining `publish_posts`, `upload_files`, and `edit_published_posts` capabilities, including access to the plugin's own `/wp-json/optima-express/v1/blog-post` REST endpoint. Exploitation requires open user registration to be enabled on the target site, and the attacker must register the `optima-express` username before the plugin has had the opportunity to provision that login for its own integration account. |
| A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.1.0.
Users are recommended to upgrade to version 10.1.1, which fixes the issue. |
| Cross-Site Request Forgery (CSRF) vulnerability in Elementor Website Builder allows Cross Site Request Forgery.
This issue affects Elementor Website Builder: from n/a through 4.3.1. |
| The door access control on a Norwegian Cruise Line asset grants entry based only on the credential's static 7-byte UID stored on an NTAG212 NFC chip. A UID is a manufacturer serial number sent in the clear on every read and is not intended to be secret or to authenticate the holder. Validating on the UID of the NTAG212 NFC chip alone is identification, not authentication, and the credential has no challenge-response capability that would resist copying. |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. From 2.5.0 until 2.5.1, the /homepage/proxy endpoint accepts an authenticated user's url query parameter and passes it to http.get or https.get without destination restrictions. In src/backend/database/routes/homepage-proxy-routes.ts, new URL performs only syntactic validation, allowing requests to loopback, RFC1918, link-local, and cloud metadata destinations. The endpoint returns the complete fetched JSON response, so a low-privilege or self-registered account can exfiltrate internal service data and cloud credentials. This issue is fixed in version 2.5.1. |
| OpenWA is a free, open source, self-hosted WhatsApp API gateway. Prior to 0.23.5, the /events WebSocket gateway delivers the session.qr event to a VIEWER API key that subscribes by event name or through either wildcard subscription form, even though GET /api/sessions/{sessionId}/qr requires the OPERATOR role. When an allowed session is waiting to be paired, the exposed QR lets the key holder link an external device to the WhatsApp account and then read and send messages outside OpenWA and its audit trail. Keys restricted through allowedSessions remain limited to those sessions, and deployments that issue only OPERATOR or ADMIN keys are not affected. This issue is fixed in version 0.23.5. |
| Python Social Auth is a social authentication/registration mechanism. Prior to version 5.0.0, the `vk-app` backend accepted VK application callback data without verifying the callback signature when the `auth_key` parameter was omitted. Applications using this backend could treat unsigned attacker-controlled data as a verified VK identity. An attacker could choose callback fields such as `viewer_id`, `access_token`, `api_id`, and `api_result`, potentially allowing authentication as an arbitrary VK user ID. The issue affects only applications using the `vk-app` backend. The issue has been fixed in version 5.0.0 by requiring `auth_key` to be present and valid before callback data is trusted. |
| Rsdoctor is a build analyzer tailored for projects built with Rspack. Prior to version 1.5.16, the default Rsdoctor report HTTP server started by `@rsdoctor/rspack-plugin` binds to all network interfaces (`0.0.0.0`) and serves a `POST /api/data/key` endpoint with no authentication and wildcard CORS (`Access-Control-Allow-Origin: *`). Any network-adjacent or remote attacker can send a single unauthenticated request to retrieve the full source code of all compiled JavaScript modules (`moduleCodeMap`), serialized build configuration (`configs`), error details, and other sensitive build metadata. This server is enabled by default in non-CI environments, requiring no special configuration from the victim developer. Version 1.5.16 patches the issue. |
| DBHub is a database MCP server for Postgres, MySQL, SQL Server, Oracle, MariaDB, SQLite. Prior to version 0.22.6, setting `readonly = true` on the `execute_sql` tool does not make the connection read-only. The connectors are written to set PostgreSQL `default_transaction_read_only=on` (and open SQLite in `readOnly` mode), but that code is gated on a config value that is never populated, so it never runs. The only thing left enforcing read-only is a classifier that inspects the first keyword of each statement. Any `SELECT` that writes or has side effects through a function call passes it. With an ordinary role this allows sequence tampering; with a privileged role it allows writing arbitrary files on the server (`lo_export`), reading arbitrary host files (`pg_read_file`), and remote code execution (`dblink` + `COPY ... TO PROGRAM`). The HTTP transport is unauthenticated and binds to `0.0.0.0` by default, so this is reachable by any network caller of `/mcp`. Version 0.22.6 patches the issue. |
| zbateson/mail-mime-parser is a mail mime parser alternative to PHP's imap* functions and Pear libraries for reading messages in Internet Message Format RFC 822. Prior to version 3.0.6 and 4.0.2, CRLF (carriage-return / line-feed) header injection (CWE-93) affecting any application that uses this library to build or forward MIME messages with an attacker-influenced attachment filename. Attachment filenames are interpolated into the `Content-Type` and `Content-Disposition` header values without stripping CR/LF, so a filename containing `\r\n` serializes as one or more additional, attacker-controlled header lines (for example a forged `Bcc:` that silently exfiltrates a copy of the outgoing message). The untrusted filename can come directly from parsed inbound mail, so no local construction is required — an application that re-attaches or re-sends a parsed filename is exposed. Versions 3.0.6 and 4.0.2 patch the issue. Versions 1.x and 2.x are also affected but are end-of-life and will not receive patches; users on those lines should upgrade to a fixed release. If upgrading is not immediately possible, strip CR and LF from any filename before passing it to attachment APIs, and from the result of getFilename() before reusing it in a constructed message — e.g. preg_replace('/[\r\n]+/', ' ', $filename). |
| zbateson/mail-mime-parser is a mail mime parser alternative to PHP's imap* functions and Pear libraries for reading messages in Internet Message Format RFC 822. Starting in version 2.0.0 and prior to version 3.0.6 and 4.0.2, an uncontrolled resource consumption / algorithmic complexity vulnerability (CWE-400) affects any application that parses untrusted email with this library. Three independent parsing paths are super-linear in cost, so a byte-size cap on the caller side does **not** bound the work done. A crafted message under 2 MB can consume seconds of CPU or hundreds of megabytes to multiple gigabytes of memory (leading to an out-of-memory kill), enabling denial of service. The parse is lazy, but the cost is paid on the first `getAllParts()` or content read. This is fxed in 4.0.2 and 3.0.6. The fixes add configurable limits on multipart nesting depth and on header count / total header size (recording a parse error past the threshold rather than throwing), and change sibling append to O(n). Users should upgrade to one of these (or later) versions. Versions 2.x are also affected but are end-of-life and will not receive patches; users on those lines should upgrade to a fixed release. (Versions prior to 2.0 used a different parser and are not affected by all three paths.) These costs are super-linear, so an input byte-size cap alone does not bound them. Until upgrading, restrict exposure of the parser to untrusted input, and run parsing under a constrained memory_limit and execution time limit so a malicious message fails its own request rather than exhausting the host. |
