| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Keycloak's OIDC component in the "checkLoginIframe," which allows unvalidated cross-origin messages. This flaw allows attackers to coordinate and send millions of requests in seconds using simple code, significantly impacting the application's availability without proper origin validation for incoming messages. |
| Incorrect permission assignment for critical resource issue exists in MosP kintai kanri V4.6.6 and earlier, which may allow a remote unauthenticated attacker with access to the product to alter the product settings. |
| A flaw was found in X.Org server. In the XISendDeviceHierarchyEvent function, it is possible to exceed the allocated array length when certain new device IDs are added to the xXIHierarchyInfo struct. This can trigger a heap buffer overflow condition, which may lead to an application crash or remote code execution in SSH X11 forwarding environments. |
| A vulnerability was detected in ermig1979 AntiDupl up to 2.3.12. Impacted is an unknown function of the file AntiDupl.NET.WinForms.exe of the component Delete Duplicate Image Handler. The manipulation results in link following. The attack is only possible with local access. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in Serdar Bayram Ghost Hot Spot up to 20251014. The affected element is an unknown function of the file /Auth.php of the component Login. This manipulation causes sql injection. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Somonator Terms Dictionary terms-dictionary allows Reflected XSS.This issue affects Terms Dictionary: from n/a through <= 1.5.1. |
| setuid() does not affect libuv's internal io_uring operations if initialized before the call to setuid().
This allows the process to perform privileged operations despite presumably having dropped such privileges through a call to setuid().
This vulnerability affects all users using version greater or equal than Node.js 18.18.0, Node.js 20.4.0 and Node.js 21. |
| A vulnerability has been identified in Cerberus PRO EN Engineering Tool (All versions), Cerberus PRO EN Fire Panel FC72x IP6 (All versions), Cerberus PRO EN Fire Panel FC72x IP7 (All versions), Cerberus PRO EN Fire Panel FC72x IP8 (All versions < IP8 SR4), Cerberus PRO EN X200 Cloud Distribution IP7 (All versions), Cerberus PRO EN X200 Cloud Distribution IP8 (All versions < V4.3.5618), Cerberus PRO EN X300 Cloud Distribution IP7 (All versions), Cerberus PRO EN X300 Cloud Distribution IP8 (All versions < V4.3.5617), Cerberus PRO UL Compact Panel FC922/924 (All versions < MP4), Cerberus PRO UL Engineering Tool (All versions < MP4), Cerberus PRO UL X300 Cloud Distribution (All versions < V4.3.0001), Desigo Fire Safety UL Compact Panel FC2025/2050 (All versions < MP4), Desigo Fire Safety UL Engineering Tool (All versions < MP4), Desigo Fire Safety UL X300 Cloud Distribution (All versions < V4.3.0001), Sinteso FS20 EN Engineering Tool (All versions), Sinteso FS20 EN Fire Panel FC20 MP6 (All versions), Sinteso FS20 EN Fire Panel FC20 MP7 (All versions), Sinteso FS20 EN Fire Panel FC20 MP8 (All versions < MP8 SR4), Sinteso FS20 EN X200 Cloud Distribution MP7 (All versions), Sinteso FS20 EN X200 Cloud Distribution MP8 (All versions < V4.3.5618), Sinteso FS20 EN X300 Cloud Distribution MP7 (All versions), Sinteso FS20 EN X300 Cloud Distribution MP8 (All versions < V4.3.5617), Sinteso Mobile (All versions). The network communication library in affected systems insufficiently validates HMAC values which might result in a buffer overread.
This could allow an unauthenticated remote attacker to crash the network service. |
| A vulnerability has been identified in Cerberus PRO EN Engineering Tool (All versions), Cerberus PRO EN Fire Panel FC72x IP6 (All versions), Cerberus PRO EN Fire Panel FC72x IP7 (All versions), Cerberus PRO EN Fire Panel FC72x IP8 (All versions < IP8 SR4), Cerberus PRO EN X200 Cloud Distribution IP7 (All versions), Cerberus PRO EN X200 Cloud Distribution IP8 (All versions < V4.3.5618), Cerberus PRO EN X300 Cloud Distribution IP7 (All versions), Cerberus PRO EN X300 Cloud Distribution IP8 (All versions < V4.3.5617), Cerberus PRO UL Compact Panel FC922/924 (All versions < MP4), Cerberus PRO UL Engineering Tool (All versions < MP4), Cerberus PRO UL X300 Cloud Distribution (All versions < V4.3.0001), Desigo Fire Safety UL Compact Panel FC2025/2050 (All versions < MP4), Desigo Fire Safety UL Engineering Tool (All versions < MP4), Desigo Fire Safety UL X300 Cloud Distribution (All versions < V4.3.0001), Sinteso FS20 EN Engineering Tool (All versions), Sinteso FS20 EN Fire Panel FC20 MP6 (All versions), Sinteso FS20 EN Fire Panel FC20 MP7 (All versions), Sinteso FS20 EN Fire Panel FC20 MP8 (All versions < MP8 SR4), Sinteso FS20 EN X200 Cloud Distribution MP7 (All versions), Sinteso FS20 EN X200 Cloud Distribution MP8 (All versions < V4.3.5618), Sinteso FS20 EN X300 Cloud Distribution MP7 (All versions), Sinteso FS20 EN X300 Cloud Distribution MP8 (All versions < V4.3.5617), Sinteso Mobile (All versions). The network communication library in affected systems improperly handles memory buffers when parsing X.509 certificates.
This could allow an unauthenticated remote attacker to crash the network service. |
| A malformed discovery packet sent by a malicious actor with preexisting access to the network could interrupt the functionality of device management and discovery.
Affected Products:
UniFi Access Points
UniFi Switches
UniFi LTE Backup
UniFi Express (Only Mesh Mode, Router mode is not affected)
Mitigation:
Update UniFi Access Points to Version 6.6.55 or later.
Update UniFi Switches to Version 6.6.61 or later.
Update UniFi LTE Backup to Version 6.6.57 or later.
Update UniFi Express to Version 3.2.5 or later. |
| quic-go is an implementation of the QUIC protocol in Go. Prior to version 0.42.0, an attacker can cause its peer to run out of memory sending a large number of `NEW_CONNECTION_ID` frames that retire old connection IDs. The receiver is supposed to respond to each retirement frame with a `RETIRE_CONNECTION_ID` frame. The attacker can prevent the receiver from sending out (the vast majority of) these `RETIRE_CONNECTION_ID` frames by collapsing the peers congestion window (by selectively acknowledging received packets) and by manipulating the peer's RTT estimate. Version 0.42.0 contains a patch for the issue. No known workarounds are available. |
| In RNP version 0.18.0 a refactoring regression causes the symmetric
session key used for Public-Key Encrypted Session Key (PKESK) packets to
be left uninitialized except for zeroing, resulting in it always being
an all-zero byte array.
Any data encrypted using public-key encryption
in this release can be decrypted trivially by supplying an all-zero
session key, fully compromising confidentiality.
The vulnerability affects only public key encryption (PKESK packets). Passphrase-based encryption (SKESK packets) is not affected.
Root cause: Vulnerable session key buffer used in PKESK packet generation.
The defect was introduced in commit `7bd9a8dc356aae756b40755be76d36205b6b161a` where initialization
logic inside `encrypted_build_skesk()` only randomized the key for the
SKESK path and omitted it for the PKESK path. |
| Sandboxie Plus 0.7.2 contains an unquoted service path vulnerability in the SbieSvc service that allows local attackers to execute code with elevated privileges. Attackers can exploit the unquoted binary path to inject malicious executables that will be launched with LocalSystem permissions during service startup. |
| Pingzapper 2.3.1 contains an unquoted service path vulnerability in the PingzapperSvc service that allows local attackers to potentially execute arbitrary code. Attackers can exploit the unquoted path in 'C:\Program Files (x86)\Pingzapper\PZService.exe' to inject malicious executables and escalate privileges. |
| A security flaw has been discovered in lmsys sglang 0.4.6. Affected by this vulnerability is the function main of the file /update_weights_from_tensor. The manipulation of the argument serialized_named_tensors results in deserialization. The attack can be launched remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| Uncontrolled Search Path Element Vulnerability in Setting and Operation Application for Lighting Control System MILCO.S Setting Application all versions, MILCO.S Setting Application (IR) all versions, MILCO.S Easy Setting Application (IR) all versions, and MILCO.S Easy Switch Application (IR) all versions allows a local attacker to execute malicious code by having installer to load a malicious DLL. However, if the signer name "Mitsubishi Electric Lighting" appears on the "Digital Signatures" tab of the properties for "MILCO.S Lighting Control.exe", the application is a fixed one. This vulnerability only affects when the installer is run, not after installation. If a user downloads directly from Mitsubishi Electric website and installs the affected product, there is no risk of malicious code being introduced. |
| An issue was discovered in Logpoint before 7.6.0. An attacker with operator privileges can exploit a path traversal vulnerability when creating a Layout Template, which can lead to remote code execution (RCE). |
| Microvirt MEMU Play 3.7.0 contains an unquoted service path vulnerability in the MEmusvc Windows service that allows local attackers to potentially execute arbitrary code. Attackers can exploit the unquoted binary path to inject malicious executables that will be run with elevated LocalSystem privileges. |
| OKI Print Job Accounting 4.4.10 contains an unquoted service path vulnerability in the OkiJaSvc service that allows local attackers to potentially execute arbitrary code. Attackers can exploit the unquoted path in 'C:\Program Files\Okidata\Print Job Accounting\' to inject malicious executables and escalate privileges. |
| The H2-DM1E PLC's authentication protocol appears to utilize either a custom encoding scheme or a challenge-response protocol. However, there's an observed anomaly in the H2-DM1E PLC's protocol execution, namely its acceptance of multiple distinct packets as valid authentication responses. This behavior deviates from standard security practices where a single, specific response or encoding pattern is expected for successful authentication. |
