Total
29787 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38470 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime Assuming the "rx-vlan-filter" feature is enabled on a net device, the 8021q module will automatically add or remove VLAN 0 when the net device is put administratively up or down, respectively. There are a couple of problems with the above scheme. The first problem is a memory leak that can happen if the "rx-vlan-filter" feature is disabled while the device is running: # ip link add bond1 up type bond mode 0 # ethtool -K bond1 rx-vlan-filter off # ip link del dev bond1 When the device is put administratively down the "rx-vlan-filter" feature is disabled, so the 8021q module will not remove VLAN 0 and the memory will be leaked [1]. Another problem that can happen is that the kernel can automatically delete VLAN 0 when the device is put administratively down despite not adding it when the device was put administratively up since during that time the "rx-vlan-filter" feature was disabled. null-ptr-unref or bug_on[2] will be triggered by unregister_vlan_dev() for refcount imbalance if toggling filtering during runtime: $ ip link add bond0 type bond mode 0 $ ip link add link bond0 name vlan0 type vlan id 0 protocol 802.1q $ ethtool -K bond0 rx-vlan-filter off $ ifconfig bond0 up $ ethtool -K bond0 rx-vlan-filter on $ ifconfig bond0 down $ ip link del vlan0 Root cause is as below: step1: add vlan0 for real_dev, such as bond, team. register_vlan_dev vlan_vid_add(real_dev,htons(ETH_P_8021Q),0) //refcnt=1 step2: disable vlan filter feature and enable real_dev step3: change filter from 0 to 1 vlan_device_event vlan_filter_push_vids ndo_vlan_rx_add_vid //No refcnt added to real_dev vlan0 step4: real_dev down vlan_device_event vlan_vid_del(dev, htons(ETH_P_8021Q), 0); //refcnt=0 vlan_info_rcu_free //free vlan0 step5: delete vlan0 unregister_vlan_dev BUG_ON(!vlan_info); //vlan_info is null Fix both problems by noting in the VLAN info whether VLAN 0 was automatically added upon NETDEV_UP and based on that decide whether it should be deleted upon NETDEV_DOWN, regardless of the state of the "rx-vlan-filter" feature. [1] unreferenced object 0xffff8880068e3100 (size 256): comm "ip", pid 384, jiffies 4296130254 hex dump (first 32 bytes): 00 20 30 0d 80 88 ff ff 00 00 00 00 00 00 00 00 . 0............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 81ce31fa): __kmalloc_cache_noprof+0x2b5/0x340 vlan_vid_add+0x434/0x940 vlan_device_event.cold+0x75/0xa8 notifier_call_chain+0xca/0x150 __dev_notify_flags+0xe3/0x250 rtnl_configure_link+0x193/0x260 rtnl_newlink_create+0x383/0x8e0 __rtnl_newlink+0x22c/0xa40 rtnl_newlink+0x627/0xb00 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 [2] kernel BUG at net/8021q/vlan.c:99! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 382 Comm: ip Not tainted 6.16.0-rc3 #61 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_vlan_dev (net/8021q/vlan.c:99 (discriminator 1)) RSP: 0018:ffff88810badf310 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810da84000 RCX: ffffffffb47ceb9a RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88810e8b43c8 RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6cefe80 R10: ffffffffb677f407 R11: ffff88810badf3c0 R12: ffff88810e8b4000 R13: 0000000000000000 R14: ffff88810642a5c0 R15: 000000000000017e FS: 00007f1ff68c20c0(0000) GS:ffff888163a24000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1ff5dad240 CR3: 0000000107e56000 CR4: 00000000000006f0 Call Trace: <TASK ---truncated--- | ||||
| CVE-2023-52325 | 1 Trendmicro | 1 Apex Central | 2025-12-22 | 7.5 High |
| A local file inclusion vulnerability in one of Trend Micro Apex Central's widgets could allow a remote attacker to execute arbitrary code on affected installations. Please note: this vulnerability must be used in conjunction with another one to exploit an affected system. In addition, an attacker must first obtain a valid set of credentials on target system in order to exploit this vulnerability. | ||||
| CVE-2025-38332 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Use memcpy() for BIOS version The strlcat() with FORTIFY support is triggering a panic because it thinks the target buffer will overflow although the correct target buffer size is passed in. Anyway, instead of memset() with 0 followed by a strlcat(), just use memcpy() and ensure that the resulting buffer is NULL terminated. BIOSVersion is only used for the lpfc_printf_log() which expects a properly terminated string. | ||||
| CVE-2025-10226 | 3 Axxonsoft, Linux, Microsoft | 4 Axxon One, Linux, Linux Kernel and 1 more | 2025-12-19 | 9.8 Critical |
| Dependency on Vulnerable Third-Party Component (CWE-1395) in the PostgreSQL backend in AxxonSoft Axxon One (C-Werk) 2.0.8 and earlier on Windows and Linux allows a remote attacker to escalate privileges, execute arbitrary code, or cause denial-of-service via exploitation of multiple known CVEs present in PostgreSQL v10.x, which are resolved in PostgreSQL 17.4. | ||||
| CVE-2025-38031 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: padata: do not leak refcount in reorder_work A recent patch that addressed a UAF introduced a reference count leak: the parallel_data refcount is incremented unconditionally, regardless of the return value of queue_work(). If the work item is already queued, the incremented refcount is never decremented. Fix this by checking the return value of queue_work() and decrementing the refcount when necessary. Resolves: Unreferenced object 0xffff9d9f421e3d80 (size 192): comm "cryptomgr_probe", pid 157, jiffies 4294694003 hex dump (first 32 bytes): 80 8b cf 41 9f 9d ff ff b8 97 e0 89 ff ff ff ff ...A............ d0 97 e0 89 ff ff ff ff 19 00 00 00 1f 88 23 00 ..............#. backtrace (crc 838fb36): __kmalloc_cache_noprof+0x284/0x320 padata_alloc_pd+0x20/0x1e0 padata_alloc_shell+0x3b/0xa0 0xffffffffc040a54d cryptomgr_probe+0x43/0xc0 kthread+0xf6/0x1f0 ret_from_fork+0x2f/0x50 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2025-38273 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: tipc: fix refcount warning in tipc_aead_encrypt syzbot reported a refcount warning [1] caused by calling get_net() on a network namespace that is being destroyed (refcount=0). This happens when a TIPC discovery timer fires during network namespace cleanup. The recently added get_net() call in commit e279024617134 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done") attempts to hold a reference to the network namespace. However, if the namespace is already being destroyed, its refcount might be zero, leading to the use-after-free warning. Replace get_net() with maybe_get_net(), which safely checks if the refcount is non-zero before incrementing it. If the namespace is being destroyed, return -ENODEV early, after releasing the bearer reference. [1]: https://lore.kernel.org/all/[email protected]/T/#m12019cf9ae77e1954f666914640efa36d52704a2 | ||||
| CVE-2021-47325 | 1 Linux | 1 Linux Kernel | 2025-12-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation The reference counting issue happens in several exception handling paths of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the function forgets to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by jumping to "out" label when those error scenarios occur. | ||||
| CVE-2025-14023 | 2 Apple, Linecorp | 2 Ios, Line | 2025-12-18 | 3.1 Low |
| LINE client for iOS prior to 15.19 allows UI spoofing due to inconsistencies between the navigation state and the in-app browser's user interface, which could create confusion about the trust context of displayed pages or interactive elements under specific conditions. | ||||
| CVE-2024-35252 | 1 Microsoft | 2 Azure Storage Data Movement Library, Azure Storage Movement Client Library For .net | 2025-12-17 | 7.5 High |
| Azure Storage Movement Client Library Denial of Service Vulnerability | ||||
| CVE-2024-30103 | 1 Microsoft | 6 365 Apps, Office, Office 2019 and 3 more | 2025-12-17 | 8.8 High |
| Microsoft Outlook Remote Code Execution Vulnerability | ||||
| CVE-2024-29060 | 1 Microsoft | 3 Visual Studio 2017, Visual Studio 2019, Visual Studio 2022 | 2025-12-17 | 6.7 Medium |
| Visual Studio Elevation of Privilege Vulnerability | ||||
| CVE-2024-35250 | 1 Microsoft | 23 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 20 more | 2025-12-17 | 7.8 High |
| Windows Kernel-Mode Driver Elevation of Privilege Vulnerability | ||||
| CVE-2014-3146 | 1 Lxml | 1 Lxml | 2025-12-17 | 6.1 Medium |
| Incomplete blacklist vulnerability in the lxml.html.clean module in lxml before 3.3.5 allows remote attackers to conduct cross-site scripting (XSS) attacks via control characters in the link scheme to the clean_html function. | ||||
| CVE-2025-38005 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma: Add missing locking Recent kernels complain about a missing lock in k3-udma.c when the lock validator is enabled: [ 4.128073] WARNING: CPU: 0 PID: 746 at drivers/dma/ti/../virt-dma.h:169 udma_start.isra.0+0x34/0x238 [ 4.137352] CPU: 0 UID: 0 PID: 746 Comm: kworker/0:3 Not tainted 6.12.9-arm64 #28 [ 4.144867] Hardware name: pp-v12 (DT) [ 4.148648] Workqueue: events udma_check_tx_completion [ 4.153841] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.160834] pc : udma_start.isra.0+0x34/0x238 [ 4.165227] lr : udma_start.isra.0+0x30/0x238 [ 4.169618] sp : ffffffc083cabcf0 [ 4.172963] x29: ffffffc083cabcf0 x28: 0000000000000000 x27: ffffff800001b005 [ 4.180167] x26: ffffffc0812f0000 x25: 0000000000000000 x24: 0000000000000000 [ 4.187370] x23: 0000000000000001 x22: 00000000e21eabe9 x21: ffffff8000fa0670 [ 4.194571] x20: ffffff8001b6bf00 x19: ffffff8000fa0430 x18: ffffffc083b95030 [ 4.201773] x17: 0000000000000000 x16: 00000000f0000000 x15: 0000000000000048 [ 4.208976] x14: 0000000000000048 x13: 0000000000000000 x12: 0000000000000001 [ 4.216179] x11: ffffffc08151a240 x10: 0000000000003ea1 x9 : ffffffc08046ab68 [ 4.223381] x8 : ffffffc083cabac0 x7 : ffffffc081df3718 x6 : 0000000000029fc8 [ 4.230583] x5 : ffffffc0817ee6d8 x4 : 0000000000000bc0 x3 : 0000000000000000 [ 4.237784] x2 : 0000000000000000 x1 : 00000000001fffff x0 : 0000000000000000 [ 4.244986] Call trace: [ 4.247463] udma_start.isra.0+0x34/0x238 [ 4.251509] udma_check_tx_completion+0xd0/0xdc [ 4.256076] process_one_work+0x244/0x3fc [ 4.260129] process_scheduled_works+0x6c/0x74 [ 4.264610] worker_thread+0x150/0x1dc [ 4.268398] kthread+0xd8/0xe8 [ 4.271492] ret_from_fork+0x10/0x20 [ 4.275107] irq event stamp: 220 [ 4.278363] hardirqs last enabled at (219): [<ffffffc080a27c7c>] _raw_spin_unlock_irq+0x38/0x50 [ 4.287183] hardirqs last disabled at (220): [<ffffffc080a1c154>] el1_dbg+0x24/0x50 [ 4.294879] softirqs last enabled at (182): [<ffffffc080037e68>] handle_softirqs+0x1c0/0x3cc [ 4.303437] softirqs last disabled at (177): [<ffffffc080010170>] __do_softirq+0x1c/0x28 [ 4.311559] ---[ end trace 0000000000000000 ]--- This commit adds the missing locking. | ||||
| CVE-2025-48628 | 1 Google | 1 Android | 2025-12-17 | 7.8 High |
| In validateIconUserBoundary of PrintManagerService.java, there is a possible cross-user image leak due to a confused deputy. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2022-36542 | 1 Hashenudara | 1 Edoc-doctor-appointment-system | 2025-12-16 | 6.5 Medium |
| An access control issue in the component /ip/admin/ of Edoc-doctor-appointment-system v1.0.1 allows attackers to arbitrarily edit, read, and delete Administrator data. | ||||
| CVE-2023-4804 | 1 Johnsoncontrols | 12 Quantum Hd Unity Acuair, Quantum Hd Unity Acuair Firmware, Quantum Hd Unity Compressor and 9 more | 2025-12-16 | 10 Critical |
| An unauthorized user could access debug features in Quantum HD Unity products that were accidentally exposed. | ||||
| CVE-2023-41841 | 1 Fortinet | 1 Fortios | 2025-12-16 | 7.4 High |
| An improper authorization vulnerability in Fortinet FortiOS 7.0.0 - 7.0.11 and 7.2.0 - 7.2.4 allows an attacker belonging to the prof-admin profile to perform elevated actions. | ||||
| CVE-2023-41679 | 1 Fortinet | 1 Fortimanager | 2025-12-16 | 7.7 High |
| An improper access control vulnerability [CWE-284] in FortiManager management interface 7.2.0 through 7.2.2, 7.0.0 through 7.0.7, 6.4.0 through 6.4.11, 6.2 all versions, 6.0 all versions may allow a remote and authenticated attacker with at least "device management" permission on his profile and belonging to a specific ADOM to add and delete CLI script on other ADOMs | ||||
| CVE-2023-34984 | 1 Fortinet | 1 Fortiweb | 2025-12-16 | 7.1 High |
| A protection mechanism failure in Fortinet FortiWeb 7.2.0 through 7.2.1, 7.0.0 through 7.0.6, 6.4.0 through 6.4.3, 6.3.6 through 6.3.23 allows attacker to execute unauthorized code or commands via specially crafted HTTP requests. | ||||