| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Echo is a Go web framework. Prior to 4.16.0 and 5.4.0, Context.Scheme unconditionally trusts forwarded scheme headers from any client. A client that reaches Echo directly over plaintext HTTP can claim an HTTPS scheme and bypass HTTPSRedirect because the request is treated as already secure. Separately, behind a TLS-terminating proxy that passes an attacker-controlled header, a claimed HTTP scheme can suppress the Strict-Transport-Security header even though the browser receives the response over HTTPS. The practical risk is reduced when a trusted proxy overwrites the headers and direct backend access is prevented, but the framework previously had no trusted-source configuration for this decision. This issue is fixed in 4.16.0 and 5.4.0. |
| Echo is a Go web framework. Prior to 4.16.0 and 5.4.0, Echo's MethodOverride middleware accepts a safe HTTP method as the override target for a POST request. When MethodOverride is registered before CSRF in the post-routing middleware chain, route selection retains the original state-changing POST handler but the override changes the method before CSRF evaluates it, causing both token validation and Sec-Fetch-Site checks to be skipped. A cross-site exploit requires an authenticated victim and an override value that a browser-submitted request can control, such as the form getter used by the advisory reproducer; the default X-HTTP-Method-Override header getter is not settable by a cross-site form. This issue is fixed in 4.16.0 and 5.4.0. |
| Echo is a Go web framework. From 4.0.0 until 5.1.0, Context.RealIP falls back to client-supplied X-Forwarded-For or X-Real-IP values when Echo.IPExtractor is unset, and the default RateLimiter uses that result as its client identifier. A remote attacker can rotate arbitrary forwarded-address values to obtain new rate-limit buckets and bypass IP-based throttling used for controls such as brute-force or request-volume protection. This issue is fixed in Echo v5.1.0. |
| croc is a tool that allows any two computers to simply and securely transfer files and folders. Prior to 11.5.2, the receive-side file-readiness loop in src/croc/croc.go treats any sender-controlled basename beginning with croc-stdin- as a trusted text-transfer artifact even when SendingText is false. This skips askReceiveOverwrite and rename handling for a predictable exact-name collision in the receiver's working directory, allowing a remote sender whose transfer the user accepts to overwrite or truncate a matching regular file through recipientInitializeFile, or to remove and replace a matching destination with an empty file or an in-directory symlink through createEmptyFileAndFinish, without confirmation. The impact is limited to pre-existing names in the croc-stdin- namespace that the sender can predict; other filenames retain the prompt, dotfiles outside that namespace are not reachable, and symlink targets remain confined to the receive directory. This issue is fixed in version 11.5.2. |
| Incomplete string validation in AWS aws-nitro-enclaves-sdk-c before 0.4.6 may allow a third party to impersonate the AWS KMS endpoint.
To remediate this issue, users should rebuild any custom enclave image against aws-nitro-enclaves-sdk-c 0.4.6. |
| When NLnet Labs Unbound up to and including version 1.26.1 is configured with both a root trust anchor and an additional 'trust-anchor:' for an island-of-security zone whose parent is provably insecure under the root chain, a malicious actor who can deliver one forged NXDOMAIN response for a name inside the island, with the NSEC/SOA RRSIG 'SignerName' set to the insecure parent, tricks Unbound's validator to use the root trust anchor instead, and consecutively the insecure parent, thus causing that record to be treated as insecure and denying existence for records in the trust island. |
| Reliance on untrusted inputs in a security decision in Windows IKE Extension allows an unauthorized attacker to perform spoofing over a network. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, OpenIDImplicitGrant.validate_authorization_request() checks the client-controlled raw request.payload.scope for openid after the parent grant has filtered allowed scopes into request.scope. A registered client permitted an ID token response type but not the openid scope can add openid to the request, obtain user consent, and receive a signed ID token containing the user's subject and allowed profile claims. Authorization code flow and deployments that allow openid for every client permitted an ID token response are not affected. In authlib/oidc/core/grants/implicit.py, OpenIDImplicitGrant.validate_authorization_request() checks request.payload.scope instead of the filtered request.scope. This issue is fixed in version 1.9.0. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, OpenIDMixin.parse_id_token() reads the nonce_supported decision from the untrusted ID token being validated and sets the expected nonce to null when that claim is the JSON boolean false. In implicit and hybrid relying parties, or applications that directly accept externally supplied ID tokens, an attacker with a captured validly signed token can bypass the nonce-to-session binding and replay the victim's token into an attacker-controlled session. Plain authorization code flow is not affected, and the token must still pass signature, issuer, and audience validation. OpenIDMixin.parse_id_token() trusts nonce_supported in both authlib/integrations/base_client/sync_openid.py and authlib/integrations/base_client/async_openid.py to disable the expected nonce. This issue is fixed in version 1.9.0. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6
io_connect_bpf_populate() fills connect.port and connect.v6_addr for
AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28
bytes.
The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which
already holds sin6_port and sin6_addr. io_connect() passes addr_len to
the socket layer unchanged.
At addr_len 24 the filter sees family AF_INET6 with port and address
zero, while the kernel connects to the real destination. A filter that
denies an IPv6 port or address is bypassed. Denying connect.port == P
rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24.
Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when
absent.
The threshold mismatch was found by an AI coding assistant (Claude Code)
comparing this hook against the net/ipv6 length checks on my
instructions; it also drafted the reproducer and this patch. I verified
the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same
code. |
| Reliance on untrusted inputs in a security decision in Microsoft Office Word allows an unauthorized attacker to bypass a security feature locally. |
| Reliance on untrusted inputs in a security decision in Windows PowerShell allows an unauthorized attacker to execute code over a network. |
| Reliance on untrusted inputs in a security decision in Microsoft Office Word allows an unauthorized attacker to bypass a security feature locally. |
| A vulnerability was identified in makeplane plane up to 1.4.2. Impacted is an unknown function of the component API Endpoint. Such manipulation of the argument X-Forwarded-For leads to reliance on untrusted inputs in a security decision. It is possible to launch the attack remotely. The exploit is publicly available and might be used. |
| In `api-gateway` versions till `1.7.3`, The default rate-limit key resolver, `ClientIpKeyResolver`, derives the per-client bucket key from the leftmost element of the `X-Forwarded-For` request header. That element is supplied by the originating HTTP client and is not validated against any trusted-proxy list. A single attacker can therefore obtain an unlimited number of independent rate-limit buckets — one per unique header value — and completely bypass the gateway's request-rate limiting on every route that uses the shipped default configuration. |
| filelock is a platform-independent file lock for Python. From 3.22.0 until 4.2.1, SoftFileLock can trust a forged process identifier in a marker that an attacker can modify but cannot remove, allowing an authorized contender such as another process of the holder's account or root to act as a confused deputy, remove the live marker, and admit another holder. This issue is fixed in version 4.2.1. |
| Reliance on untrusted inputs in a security decision in Microsoft PowerShell allows an unauthorized attacker to execute code over a network. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, an attacker can send an absolute-form request that causes Request.scheme to use attacker-controlled request-target scheme data instead of the connection protocol. Applications that use Request.scheme for security decisions can consequently be tricked into treating an unencrypted connection as encrypted or an encrypted connection as unencrypted. This issue is fixed in version 3.14.4. |
| oobabooga text-generation-webui trust_remote_code Reliance on Untrusted Inputs Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of oobabooga text-generation-webui. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of the trust_remote_code parameter provided to the join endpoint. The issue results from the lack of proper validation of a user-supplied argument before using it to load a model. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-26681. |
| oobabooga text-generation-webui trust_remote_code Reliance on Untrusted Inputs Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of oobabooga text-generation-webui. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of the trust_remote_code parameter provided to the load endpoint. The issue results from the lack of proper validation of a user-supplied argument before using it to load a model. An attacker can leverage this vulnerability to execute code in the context of the service account.
. Was ZDI-CAN-26680. |
