| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Unauthenticated Broken Access Control in PayPlug for WooCommerce (Official) <= 3.1.0 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't let a pseudo dentry become the root of a mount
d_alloc_pseudo() hands out dentries for pipes, sockets and other files
that are never anyone's child or parent. They carry DCACHE_NORCU and
dentry_free() frees them right away because no lockless path walk can
ever reach them. That holds as long as such a dentry isn't the root of
a mount. But bind mounting /proc/self/fd/<fd> of such a file does
exactly that.
Most callers of alloc_file_pseudo() put their files on kernel-internal
mounts and may_copy_tree() refuses those. bpf_token_create() doesn't. It
places the token file on the bpffs mount the caller handed it and that
mount is in the caller's mount namespace so the clone goes through:
mount --bind /proc/self/fd/<token> <file>
open_tree(tokfd, "", AT_EMPTY_PATH | OPEN_TREE_CLONE) + move_mount()
__follow_mount_rcu() then loads ->mnt_root of that mount, reads d_seq
and d_flags of the dentry and only then checks mount_lock. The dentry
can be gone by then. The final mntput() of an unmounted parent unhooks
a child that stayed attached to it under mount_lock alone. When the
child's holder does the final put right after that the root is dput()
and freed immediately while a walker that found the mount hashed still
looks at it.
Refuse to clone a mount with a DCACHE_NORCU dentry as its root. Nothing
sensible can be done with a bind mount of a bpf token anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check the mounts before reading their parents in pivot_root()
path_pivot_root() reads the parents of new_root and of the caller's root
and checks whether they are shared before it checks that either mount is
in the caller's mount namespace. Only namespace_sem is held. That's fine
for a mount that is in the caller's mount namespace.
But new_root can be a file descriptor to a mount that has been unmounted
and that only the file descriptor keeps alive. If that mount stayed
attached to its parent when it was unmounted nothing pins the parent for
it. The final mntput() of the parent unhooks the children under
mount_lock alone and frees the parent afterwards:
pivot_root() close(fd), last ref on the parent
------------ ---------------------------------
ex_parent = new_mnt->mnt_parent
mntput_no_expire_slowpath()
__umount_mnt(new_mnt)
cleanup_mnt()
call_rcu()
IS_MNT_SHARED(ex_parent)
BUG: KASAN: slab-use-after-free in path_pivot_root+0xf1a/0x1840
Read of size 4 at addr ffff8881047382f8 by task pivot_widen/157
path_pivot_root+0xf1a/0x1840
__x64_sys_pivot_root+0x165/0x190
The same goes for the caller's root via chroot(). Both outcomes of the
check end in EINVAL so nothing but the read itself goes wrong. It's the
same thing commit bb4609405752 ("statmount: read the parent of an
unmounted mount under mount_lock") fixed for statmount().
Check that both mounts are in the caller's namespace before their
parents are read. Every path returns EINVAL either way. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: look at the topmost mount for a mount namespace file
attach_recursive_mnt() preallocates a mountpoint for the root of the
topmost mount of the source so that a mount that already sits at the
destination can be put on top of the source or on top of one of its
propagated copies.
The copies are made without CL_COPY_MNT_NS_FILE so their chain of
overmounts is shorter than the source's. It ends below the first bind
mount of a mount namespace file. So while the loop walks up the chain of
the source it remembers the mountpoint of that mount in "shorter" and
the existing mount is put there for the copies.
But the loop ends at the topmost mount without ever looking at it. If
the topmost mount is the only mount namespace file in the chain
"shorter" stays NULL and mnt_change_mountpoint() attaches the existing
mount of the copy below the root of the mount namespace file. That's a
dentry of nsfs. No path walk in the copy's mount namespace ever gets
there. The mount is gone until its parent goes and the copy that took
its place can't be unmounted synchronously because it has a child:
S bind mount of a file
N bind mount of a mount namespace file on top of S
A shared mount, B a slave of A, Q mounted on B/file
move_mount(S, A/file)
cat B/file -> the content of S instead of Q
umount B/file -> EBUSY
Look at every mount of the chain including the topmost one. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check a submount for references right before unmounting it
shrink_submounts() and mark_mounts_for_expiry() first collect all the
mounts they are allowed to unmount and then unmount them.
Whether a mount is busy is decided by propagate_mount_busy() on the
tree. But unmounting the first mount changes the tree that the second
one propagates into. propagate_umount()
moves a surviving overmount off a copy it unmounts and mounts it where
the copy was mounted. If that's where the propagated copy of the second
victim is looked up the overmount becomes a candidate of the second
umount_tree(). It's childless and so trim_one() commits it without
looking at its reference count.
So a synchronous umount pulls out a busy mount that is in use somewhere
else and marks it MNT_SYNC_UMOUNT while it has users:
umount2(/tmp/plshrink/p1, 0) = 0 errno 0
cwd is (unreachable)
The same two umounts requested one after the other fail with EBUSY.
This needs a mount with MNT_SHRINKABLE, i.e., automounted submounts of
NFS, AFS and CIFS or the tracefs mount below debugfs. Bind mounts
inherit the flag.
Check each mount right before it is unmounted under the same hold of
namespace_sem and mount_lock as the umount itself. Make sure that the
algorithm stays linear. |
| In the Linux kernel, the following vulnerability has been resolved:
can: dev: init_can_skb(): restore skb header initialization
Commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure")
removed the skb_reset_mac_header()/skb_reset_network_header()/
skb_reset_transport_header() calls from init_can_skb(). As a result, RX
skbs from alloc_can_skb() and friends again carry mac_header = 0xFFFF.
When such an skb reaches packet_rcv_spkt() (SOCK_PACKET), the push length
calculation overflows and triggers skb_under_panic -> kernel BUG -> full
machine panic.
The same issue was originally reported in 2014 on linux-can and fixed by
commit 969439016d2c ("can: add missing initialisations in CAN related
skbuffs"). packet_rcv_spkt() itself has never been hardened: only
packet_rcv() and tpacket_rcv() gained dev_has_header() checks in
commit d549699048b4 ("net/packet: fix packet receive on L3 devices
without visible hard header"). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use active memslots for the per-vCPU MMIO cache
KVM tags the per-vCPU MMIO cache with a memslot generation so that a
memslot update invalidates cached MMIO information. Both the fill and
validation paths use kvm_memslots(), which unconditionally selects address
space 0, even when the vCPU is running in SMM and using address space 1.
Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the
memslot generation to the cache key so that a memslot update could not
leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM
to the MMU role, support SMRAM address space") added the SMM address space,
these helpers were not converted to use the active memslots.
Consequently, an update to the SMM memslots can leave an entry from the old
SMM address space apparently valid after the vCPU returns to the normal
address space. A guest can then cause an access to valid RAM at the same
GFN to be returned to userspace as KVM_EXIT_MMIO.
Completing that exit through the VMM's RAM address space writes the backing
page without going through KVM's write-tracking path. If the page backs a
nested EPT table, KVM can continue using shadow translations derived from
the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault()
catches this invalid cache and memslot combination.
Use the vCPU's active memslots when caching and validating the entry.
Memslot generations are unique across address spaces, so the generation
also distinguishes the normal and SMM views. This matches the MMIO SPTE
cache, which already uses kvm_vcpu_memslots().
On an unpatched current-mainline kernel, a regression test that fills the
cache in SMM and updates only the SMM memslots fails the intended RAM write
and triggers the kvm_mmu_write_protect_fault() warning. With this change,
the same test completes the RAM write without a warning. The x86/smm_test,
set_memory_region_test, and memslot_modification_stress_test selftests also
pass. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix CPU hotplug hang when a dying CPU's tasks sit in the BPF scheduler
A CPU going down has to empty its own rq. Its hotplug thread waits in
sched_cpu_wait_empty() until nothing else is left, and the only thing that
wakes it is balance_push(), which runs from __schedule() on the dying CPU
and pushes off the migratable tasks the CPU picks.
sched_ext breaks this. A task sitting on a user DSQ or held by the BPF
scheduler is still counted on its rq, but an inactive CPU no longer calls
ops.dispatch() and can't pull the task back. The dying CPU goes idle with
the task still counted, and one of two things happens:
- Another CPU consumes the task. The rq empties without a __schedule() on
the dying CPU, so the hotplug thread is never woken and cpu_down() hangs
holding cpu_hotplug_lock.
- The task is affine only to the dying CPU. Nothing can move it, and the
offline stalls until the watchdog ejects the BPF scheduler.
When the rq goes offline, re-enqueue every task on it that isn't already on
the local DSQ. An enqueue on an offline rq lands on the local DSQ, so the
dying CPU itself picks the tasks and balance_push() pushes them off, the
same as for the other sched classes. From then on no sched_ext path on
another CPU can pull a task off the rq.
ops.dispatch() currently stops as soon as the CPU goes inactive, and CPU
hotplug then waits for an RCU grace period before taking the rq offline. A
BPF-held task affine only to the dying CPU and preempted inside an RCU
read-side critical section would block that grace period, and the rq would
never go offline. Test SCX_RQ_ONLINE directly so that ops.dispatch() keeps
running until the rq goes offline. Only the dying CPU's own hotplug thread
clears the flag during teardown, and task_can_run_on_remote_rq() still keeps
other rqs' tasks off the CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix NULL pointer dereference when the 'R' flag is used
If the dm-integrity device has the SB_FLAG_DIRTY_BITMAP flag set and the
user activates the device in the 'R' mode, a crash in dm_integrity_resume
happens because the function attempts to read the journal containing the
bitmap.
This patch makes dm-integrity skip any writes to the device in
dm_integrity_resume if the device is activated in the 'R' mode. |
| MongoDB Compass relies on Electron, a third-party runtime that carries its own TLS root certificate store. This root certificate store has the recoverable eMudhra intermediate CA certificates. Issue is resolved by updating to Compass 1.53.1, which includes Electron 44.9.1. |
| An attendee authentication vulnerability in the email calendar processing of Zimbra Collaboration Suite (ZCS) allows an unauthenticated sender to forge another attendee's response to an existing meeting. Zimbra passes a null sender identity when processing iCalendar REPLY components, causing the attendee authorization filter to be skipped. An attacker who knows the meeting UID, organizer address and attendee address can send a non-outdated reply that changes the attendee's participation status in the organizer's calendar. The change occurs automatically during delivery without organizer or attendee interaction. ZCS 10.1.16 and 10.1.21 are affected. |
| Vulnerability in the Oracle Outside In Technology product of Oracle Fusion Middleware (component: Outside In PDF Export SDK). The supported version that is affected is 8.5.8. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Outside In Technology. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in takeover of Oracle Outside In Technology. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H). |
| Vulnerability in the Siebel CRM Deployment product of Oracle Siebel CRM (component: Server Infrastructure). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Siebel CRM Deployment executes to compromise Siebel CRM Deployment. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Siebel CRM Deployment accessible data. CVSS 3.1 Base Score 5.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the Siebel Apps - Financial Services product of Oracle Siebel CRM (component: Financial Accounts). Supported versions that are affected are 17.0-26.9. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Siebel Apps - Financial Services. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Siebel Apps - Financial Services accessible data as well as unauthorized update, insert or delete access to some of Siebel Apps - Financial Services accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:L/A:N). |
| Vulnerability in the Siebel CRM Deployment product of Oracle Siebel CRM (component: Server Infrastructure). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Siebel CRM Deployment executes to compromise Siebel CRM Deployment. Successful attacks of this vulnerability can result in takeover of Siebel CRM Deployment. CVSS 3.1 Base Score 6.7 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Siebel CRM Deployment product of Oracle Siebel CRM (component: Server Infrastructure). Supported versions that are affected are 17.0-26.9. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Siebel CRM Deployment. Successful attacks of this vulnerability can result in takeover of Siebel CRM Deployment. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Command injection vulnerabilities exist in the affected interface of AOS-8 that could allow an unauthenticated remote attacker to run arbitrary commands on the underlying host if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in VillaTheme Photo Reviews for WooCommerce woo-photo-reviews allows Reflected XSS.This issue affects Photo Reviews for WooCommerce: from n/a through 1.2.30. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: ltc3676: don't read the write-only HRST and CLIRQ registers
HRST (0x1e) and CLIRQ (0x1f) are write-only command strobes. Writing HRST
triggers a hard reset of the chip and writing CLIRQ clears the interrupt;
reading them returns nothing useful, and the read itself fires the command.
The result is that a plain register dump resets the board:
cat /sys/kernel/debug/regmap/2-003c/registers
walks every readable register, hits HRST, and the board reboots.
Split the callback back in two so HRST and CLIRQ stay writable but are no
longer readable. The readable range is left unchanged
(LTC3676_BUCK1 ... LTC3676_IRQSTAT). |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix soft lockup in the netlink flow dump
A production compute node carrying a few thousand datapath flows hit a
soft lockup inside a single netlink flow dump and panicked.
ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it
emits, and that releases stats->lock with spin_unlock_bh() once per
CPU that has touched the flow. Every release is a local_bh_enable(),
and each one runs the pending softirq backlog in the dumping thread's
own context.
The skb bounds the flows one callback emits, but not the softirq work
it absorbs. On a CPU that carries the box's packet load the backlog
refills as fast as it drains, so the dumping thread becomes that CPU's
softirq engine. It never sleeps and it has no reschedule point, so
under voluntary preemption nothing can take the CPU away from it:
neither the ksoftirqd the kernel woke to take the work over, nor the
stopper thread the softlockup detector dispatches to refresh its
timestamp.
Hold BH off across the whole callback instead, the way
ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop
draining softirqs. The loop already runs under rcu_read_lock() and
cannot sleep. What it gives up is preemption under CONFIG_PREEMPT,
since a BH-off region is not preemptible outside PREEMPT_RT. The
region stays short: the skb caps the flows one callback emits, and
empty buckets cost no skb space but are each visited once per dump, as
the cursor only moves forward. The table grows on insert and shrinks
only on flush, so the walk is bounded by the largest flow count the
datapath has held. The softirq backlog the callback used to absorb has
no bound at all. |
