| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Values produced by ${random.value} are not suitable for use as secrets. ${random.uuid} is not affected. ${random.int} and ${random.long} should never be used for secrets as they are numeric values with a predictable range.
Affected: Spring Boot 4.0.0–4.0.5 (fix 4.0.6), 3.5.0–3.5.13 (fix 3.5.14), 3.4.0–3.4.15 (fix 3.4.16), 3.3.0–3.3.18 (fix 3.3.19), 2.7.0–2.7.32 (fix 2.7.33); random value property source / weak PRNG for secrets. Versions that are no longer supported are also affected per vendor advisory. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: make release_scratchbuffers idempotent
brcmf_pcie_release_scratchbuffers() frees the shared.scratch and
shared.ringupd DMA buffers with dma_free_coherent() but does not clear
the pointers afterwards, unlike the sibling release_ringbuffers() which
NULLs commonrings/flowrings/idxbuf on release.
Both the bus_reset .reset callback (brcmf_pcie_reset) and
brcmf_pcie_remove() call release_scratchbuffers. When reset teardown
has run before removal, remove's own teardown would call
dma_free_coherent() a second time on the already-freed DMA allocation.
NULL the pointers after free, matching release_ringbuffers(), so a later
release observes that the allocation has already been released. This
patch makes repeated sequential release safe; the reset-work lifetime is
handled separately by the following patch.
This issue was found by an in-house static analysis tool. |
| When using Google Secrets Manager as a backend for the Spring Cloud Config server a client can craft a request to the config server potentially exposing secrets from unintended GCP projects.
Spring Cloud Config 3.1.x: affected from 3.1.0 through 3.1.13 (inclusive); upgrade to 3.1.14 or greater (Enterprise Support Only). Spring Cloud Config 4.1.x: affected from 4.1.0 through 4.1.9 (inclusive); upgrade to 4.1.10 or greater (Enterprise Support Only). Spring Cloud Config 4.2.x: affected from 4.2.0 through 4.2.6 (inclusive); upgrade to 4.2.7 or greater (Enterprise Support Only). Spring Cloud Config 4.3.x: affected from 4.3.0 through 4.3.2 (inclusive); upgrade to 4.3.3 or greater. Spring Cloud Config 5.0.x: affected from 5.0.0 through 5.0.2 (inclusive); upgrade to 5.0.3 or greater. |
| Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322. |
| The Adversarial Robustness Toolbox (ART) thru 1.20.1 contains a command-line argument injection vulnerability in its Kubeflow component (robustness_evaluation_fgsm_pytorch.py). The script uses the unsafe eval() function to parse string values provided via the --clip_values and --input_shape command-line arguments. This allows an attacker to inject arbitrary Python code into these arguments, which will be executed when eval() is called. The vulnerability can be exploited remotely if an attacker can control these arguments (e.g., through pipeline configuration or automated scripts), leading to arbitrary code execution on the system running the ART evaluation. |
| An attacker can cause uncontrolled memory usage with excessive bracing over IMAP. The fix in CVE-2026-27857 was incomplete, only blocking one way of doing this, so there was still another way left open. In particular, the fix was for closing braces, but you could still use open braces to bypass the limit. Using excessive bracing, attacker can cause memory usage up to configured memory limit. Install fixed version, or configure vsz_limit for imap process to low value. No publicly available exploits are known. |
| A security flaw has been discovered in Tenda G0 up to 20260625. Impacted is the function setPortMapping of the file /goform/module of the component httpd web management interface. Performing a manipulation of the argument portMappingServer/porMappingtInternal/portMappingExternal results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. |
| An improper neutralization of special elements used in an sql command ('sql injection') vulnerability in Fortinet FortiAnalyzer 7.6.0 through 7.6.4, FortiAnalyzer 7.4.0 through 7.4.8, FortiAnalyzer 7.2 all versions, FortiAnalyzer 7.0 all versions, FortiAnalyzer Cloud 7.6.2 through 7.6.3, FortiAnalyzer-BigData 7.6.0 through 7.6.1, FortiAnalyzer-BigData 7.4.0 through 7.4.5, FortiManager 7.6.0 through 7.6.4, FortiManager 7.4.0 through 7.4.8, FortiManager 7.2 all versions, FortiManager 7.0 all versions, FortiManager Cloud 7.6.2 through 7.6.4 may allow a privileged authenticated attacker to execute unauthorized code or commands via JSON RPC API |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Prevent interrupt storm on host controller error (HCE)
The xHCI controller reports a Host Controller Error (HCE) in UAS Storage
Device plug/unplug scenarios on Android devices. HCE is checked in
xhci_irq() function and causes an interrupt storm (since the interrupt
isn’t cleared), leading to severe system-level faults.
When the xHC controller reports HCE in the interrupt handler, the driver
only logs a warning and assumes xHC activity will stop as stated in xHCI
specification. An interrupt storm does however continue on some hosts
even after HCE, and only ceases after manually disabling xHC interrupt
and stopping the controller by calling xhci_halt().
Add xhci_halt() to xhci_irq() function where STS_HCE status is checked,
mirroring the existing error handling pattern used for STS_FATAL errors.
This only fixes the interrupt storm. Proper HCE recovery requires resetting
and re-initializing the xHC. |
| A weakness has been identified in Tenda G0 up to 20260625. The affected element is the function addStaticRoute of the file /goform/module of the component httpd web management interface. Executing a manipulation of the argument staticRouteNet can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. |
| A vulnerability was identified in Tenda G0 up to 20260625. This issue affects the function formSetPortMirror of the file /goform/module of the component httpd Web Management Interface. Such manipulation of the argument portMirrorMirroredPorts leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled
HCI_UART_SENDING bit in tx_state means write_work is pending and blocks
queueing it again. Currently this bit is not cleared when canceling the
work in hci_uart_close(), which blocks future writes when device is
reopened later if write_work was pending.
Fix by clearing HCI_UART_SENDING when canceling the work.
Also make clearing of tx_skb safe by using disable_work_sync +
enable_work instead of just cancel_work_sync. hci_uart_flush() purges
the proto tx queue so we can cancel the pending write_work there,
instead of doing it just in hci_uart_close(). Re-enable and possibly
requeue the work after queue flush. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: net: Fix fragmented datagram reassembly
fwnet_frag_new() keeps a sorted list of received fragments for a partial
datagram. When a new fragment is adjacent to an existing fragment, the
code checks whether the new fragment also closes the gap to the next or
previous list entry.
Those neighbor lookups currently assume that the current fragment always
has a real next or previous fragment. At a list edge, the next or
previous entry is the list head, not a struct fwnet_fragment_info.
The gap checks also compare against the old edge of the current fragment
instead of the edge after adding the new fragment. As a result, a
fragment that bridges two existing ranges may leave two adjacent ranges
unmerged, so fwnet_pd_is_complete() can miss a complete datagram.
Check for the list head before looking up the neighboring fragment, and
compare the neighbor against the new fragment's far edge when deciding
whether to merge all three ranges.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| A vulnerability was determined in SourceCodester Air Cargo Management System 1.0. Impacted is an unknown function of the file /classes/Master.php?f=save_cargo_type. Executing a manipulation of the argument ID can lead to sql injection. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. |
| Improper isolation of shared resources within the CPU operation cache on Zen 2-based products could allow an attacker to corrupt instructions executed at a different privilege level, potentially resulting in privilege escalation. |
| A malicious SSH peer could send unsolicited global request responses to fill an internal buffer, blocking the connection's read loop. The blocked goroutine could not be released by calling Close(), resulting in a resource leak per connection. Unsolicited global responses are now discarded. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_close() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_close_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix 32-bit overflow in CWSR total size calculation
total_cwsr_size was computed in 32-bit before being used as a BO/SVM
allocation size.
With large ctx_save_restore_area_size and debug_memory_size
multiplied by the XCC count, the product can wrap,
yielding an undersized CWSR save area that firmware later overruns.
Promote total_cwsr_size to u64 and use check_add_overflow()/
check_mul_overflow() in both kfd_queue_acquire_buffers() and
kfd_queue_release_buffers().
(cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608) |
| Vault Secrets Operator 1.3.0 up to 1.4.1 is vulnerable to an arbitrary file read and credential exfiltration issue in the AppRole authentication configuration that may allow a tenant with limited Kubernetes RBAC permissions to read files from the operator pod's filesystem and transmit their contents to a tenant-controlled endpoint, potentially leading to privilege escalation within the cluster. This vulnerability (CVE-2026-8715) is fixed in Vault Secrets Operator 1.5.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce: fix integer overflow in image size
Fix a security vulnerability where malicious VCE command streams
with oversized dimensions (e.g. 65536×65536) cause 32-bit integer
overflow, wrapping the calculated buffer size to 0. This bypasses
validation and allows GPU firmware to perform out-of-bound memory
access.
The fix uses 64-bit arithmetic to detect overflow and rejects
invalid dimensions before they reach the hardware.
V2: remove redundant check
V3: modify max height value
V4: remove size64
(cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d) |
