| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (hp-wmi-sensors) Fix use-after-free in fungible_show()
nsensor->current_state is dynamically replaced as the sensor's state
changes. update_numeric_sensor_from_wobj() does this by freeing the
old string and installing a new one:
if (strcmp(trimmed, nsensor->current_state)) {
new_string = hp_wmi_strdup(dev, trimmed);
if (new_string) {
devm_kfree(dev, nsensor->current_state);
nsensor->current_state = new_string;
}
}
This function is only ever called from hp_wmi_update_info() while
state->lock is held, so the free-and-replace itself is properly
serialized against concurrent updates.
fungible_show(), however, reads the same pointer after the lock has
already been dropped:
err = hp_wmi_update_info(state, info);
if (err)
return err;
switch (prop) {
...
case HP_WMI_PROPERTY_CURRENT_STATE:
seq_printf(seqf, "%s\n", nsensor->current_state);
break;
hp_wmi_update_info() takes state->lock internally and releases it
before returning, so by the time fungible_show() dereferences
nsensor->current_state in seq_printf(), no lock is held. Two
processes reading a sensor's current_state debugfs entry at
overlapping times (or one reading it while another read of the same
sensor triggers a refresh) can race: one thread's seq_printf() can
be part-way through printing the string at the moment another
thread's call into update_numeric_sensor_from_wobj() frees it with
devm_kfree() and installs a new pointer, causing a use-after-free
read.
Take state->lock around the read in fungible_show() as well, so it
can never run concurrently with the free-and-replace in
update_numeric_sensor_from_wobj(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle lack of space when cleaning up verity items
When enable_verity() hits the qgroup limit, rollback_verity() needs its
own metadata reservation. When the qgroup limit or lack of space refuses
the rollback, the whole filesystem is forced read-only even though the
qgroup limit was for one subvolume only. Also orphan cleanup at the next
mount fails the same way, so the leftover items are never removed: with
-EDQUOT the subvolume stays unreachable, and with -ENOSPC on a full
filesystem the next read-write mount fails.
Start transactions with btrfs_start_transaction_fallback_global_rsv() in
btrfs_orphan_cleanup(), drop_verity_items() and rollback_verity(). Those
calls only delete items and free the space in the end, so they may use
the global reserve and skip the qgroup limit, which avoids -ENOSPC and
-EDQUOT. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Also allocate private hash on vfork()
As Jann demonstrated, it is entirely feasible to access the mm through vfork().
Therefore we need to allocate a private hash on vfork() as well as any other
CLONE_VM user.
Specifically, it must be avoided to have (private) futex waiters before
allocating the private hash. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: do not free nlk->groups while lockless readers can use it
netlink_realloc_groups() uses krealloc() under netlink_table_grab().
Whenever NLGRPSZ(groups) lands in a different kmalloc bucket, the old
bitmap is freed immediately.
Two readers of nlk->groups / nlk->ngroups do not hold the netlink
table lock:
1) sk_diag_dump_groups(). Hashed (bound) sockets are dumped from the
rhashtable walk in __netlink_diag_dump(), which only holds RCU.
Only the mc_list part of the dump takes nl_table_lock.
2) netlink_native_seq_show() (/proc/net/netlink), whose walk has been
lockless since commit 21e4902aea80 ("netlink: Lockless lookup with
RCU grace period in socket release").
Both can read a freed buffer, and sk_diag_dump_groups() can also read
past the end of the old (smaller) buffer if it happens to load the old
@groups pointer together with the new @ngroups value, copying the
result into a NETLINK_DIAG_GROUPS attribute.
This is the same class of bug that commit f773608026ee ("netlink:
access nlk groups safely in netlink bind and getname") fixed for bind()
and getname(); these two readers were missed. Simply grabbing the table
lock in sk_diag_dump_groups() is not an option, because it is also
called with nl_table_lock already held from the mc_list section of the
dump.
Make the lockless readers safe instead:
- Allocate a new bitmap and free the old one after an RCU grace period,
instead of relying on the implicit kfree() done by krealloc().
- Publish @groups before @ngroups, both with release semantics, and have
the lockless readers load @ngroups first. A reader can then never pair
the new (bigger) size with the old (smaller) buffer, and a reader
picking up the new pointer while still seeing the old size is
guaranteed to see the initialized bitmap.
netlink_realloc_groups() is called from process context (bind() and
setsockopt()), so kfree_rcu_mightsleep() can be used, once the table
has been released. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: set up the TX info early to fix failure paths
The previous commit 2c51457d930f ("wifi: mac80211: free ack status
frame on TX header build failure") cleaned up the leak, but still
left the code a bit messy and the failed SKB didn't get reported
to userspace.
Fix this up by initialising skb->cb[] earlier, which allows using
ieee80211_free_txskb() and therefore reports it for the failure
in ieee80211_build_hdr(), and unifies the ieee80211_skb_resize()
failure path with it. |
| Payload is a free and open source headless content management system. In versions before 3.90.0 and canary versions before 4.0.0-canary.34, a crafted request to the public first-register operation can execute code remotely when local authentication is enabled and no initial user has been created. This issue is fixed in versions 3.90.0 and 4.0.0-canary.34. |
| An issue in Bludit CMS 3.22.0 allows a remote attacker to obtain sensitive information via the /admin/ajax/clippy and /admin/ajax/save-as-draft endpoints |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command. |
| Payload is a free and open source headless content management system. In @payloadcms/plugin-form-builder versions before 3.90.0 and canary versions before 4.0.0-canary.34, an attacker can craft a form submission that executes code remotely on the server. This issue is fixed in versions 3.90.0 and 4.0.0-canary.34. |
| Payload is a free and open source headless content management system. Prior to 3.90.0 and 4.0.0-canary.34, an attacker with read and create or update access to a collection containing a json field or a blocks field with blocksAsJSON enabled can inject SQL through a crafted field path and operators. Collections without those fields are not affected, and richText fields are not affected. The SQLite packages are fixed in versions 3.90.0 and 4.0.0-canary.34, and the Postgres packages are fixed in version 3.73.0. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains a Server-Side Request Forgery (SSRF) vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Server-side request forgery. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains an Improper Privilege Management vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains an Exposure of Sensitive Information to an Unauthorized Actor vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information exposure. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Filesystem access for attacker. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains a Server-Side Request Forgery (SSRF) vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Server-side request forgery. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains an Improper Privilege Management vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information tampering and Unauthorized access. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains a Cross-Site Request Forgery (CSRF) vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Remote execution. |
| Use after free in FedCM in Google Chrome prior to 154.0.8037.97 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to obtain sensitive information due to improper validation of the X-Forwarded-Proto header. |
